uibtis

$16900 for forum members http://www.carsales.com.au/all-cars/private/details.aspx?R=14167997 Regards

fixed!!, in the step 4, just press the button for more than 1 seg, not just a touch.

I know, but just want do it by myself, should be something easy...

Hi I got a new remote key but I can't program it according to the service manual of the G35, according to the manual, the hazard light should flash, however, instead flashing, all doors are unlocked, after that I follow the instructions but nothing, any idea? I followed this instructions. 1. Close and lock all doors with the driver’s side power lock/unlock switch. 2. Insert key into ignition and remove it from the ignition key cylinder at least six times within 10 seconds. Your Hazard Lamps will flash if you have performed this step successfully. NOTE: Withdraw key completely from ignition cylinder each time. If this procedure is performed too fast, system will not enter programming mode. 3. Insert key into the ignition cylinder and turn to the ACC position. 4. Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should flash. NOTE: Do not press the button more than one time in the above step. If the button is pressed more than one time, the programming procedure will not be successful. 5. If there are any remaining transmitters (including the old ones), unlock then lock all doors using the driver’s side power lock/unlock switch and within 5 seconds, push ANY button on the next remote. Your Hazard Lamps should flash. Repeat this step for each transmitter (including any existing transmitters). 6. Turn the key to the OFF position, remove keys from the ignition, unlock doors using the driver’s side power lock/unlock switch and open the driver side door. cheers

I live in Melbourne, Do you know what was the problem? May you ask him what he did? Thanks

I have exactly the same problem, the driver door dosent lock with the windows lock button, only unlock, However, here is the tricky thing, with the remote key its unlock and lock perfectly. any idea?

I have a 2004 v35 coupe, and also bought from US the big 4 button remote and didn't work, tried some wreckers here in melbourne but nothing, actually i got the key shell and already got cut, i need the transponder and the electronic board. Any good dealer in melbourne? I heard Ferntree Gully nissan is good, how much cost the electronic board and the transponder from dealer?

Hi, just wondering if anyone got a 350GT for wreck and also got the 3 button remote key, I need the electronics inside, Thanks