.75 degrees sideways

I'm running a s2 rb25det, JJR greddy copy inlet manifold, q45 tb, I have q45 and z32 tps (which are supposibally the same but I tried both) and a power fc running the show. The problem: when cranking it will start then die. Give it a tiny amount of throttle and it will start and act like a vaccuum leak and want to die. Give it a little more throttle and back off it will increase rpm quickly even when the throttle body is fully closed What i'm thinking: Vacuum leak in either the AAC gasket, inlet manifold possibally not true and needing to be faced, inlet manifold gasket got damaged on installation. TPS (however does the same thing with the z32 and q45 tps, also does the same thing when the tps is unplugged) Throttle body There is a few things that are effecting it that will be fixed tomorrow but it won't be the whole cause of the problem. AAC valve vacuum nipples have been blocked using crap we had available at the time which probally won't be sealing 100% but close. One of the vacuum nipples had been snapped, so it was crimped closed until I could get a new one. Wouldn't be sealing 100% either. I'll emphasise how strange it is when you open the throttle body half way and close it, it will still increase rpm quickly. Every time it started revving more i'd shut the engine off. But I left it a bit longer on the last time and it increased rpm and then just shut off by itself. If anyone has any advice, or if you have dealings with either a q45 tb or greddy copy inlet manifolds let me know. Post up pics etc I need to get this sussed out so I can get RWC and register the damn thing

about 4k or so

I searched extensively and found what I was after, for anyone in the same predicament. Here are the wiring instructions Pressure Sensor Pink goes to AVCR Pink Pressure Sensor Black goes to AVCR Red Solenoid Valve Red goes AVCR Yellow Solenoid Valve Black goes AVCR Brown Solenoid Valve White goes AVCR Blue

I have a Greddy TD06 20g (10cm rear) kit (highmount manifold and ext gate) for my s2 rb25. It made 254rwkw's at 12psi on a similar engine to mine with slightly less mods, it was also coming on boost at 2000rpm. Wheezy has the Greddy TD06SH 20g turbo (8cm rear) on his rb20 and produced 277rwkw's @ 1.2bar, 25g turbos are good for around 500hp but however you sacrifice response for top end.

Yeah i've searched however I haven't had luck with a pic of the solenoid and the sensor plugs connected with the wires exposed

As I got douched on an avc-r and it came with just the display unit. I picked up a incrediably cheap avc-r with the solenoid and boost sensor however it was missing the harness and the plugs were snipped off as it was previously hardwired. With the Apexi USA wiring instructions it sussed out the ecu wires, howevjava script:void(0);er i'm left without the wiring diagram for the boost sensor and solenoid wires. Can someone take a pic of the both sides of the solenoid plug and boost sensor plug so I can mate them up and finish hardwiring the avc-r. I'm currently wiring it now so if you can quickly get me some pics you'll have my eternal love Love Seb

Coupe rear windscreen sold TD06 16g turbo sold Hybrid 600x300x76 on hold HR31 rear end sold pending payment.

bump, sold HR31 non hicas powersteering rack, washer bottle and rb30 powersteering pump

bump

bumpski

Sorry mate, that shell is my drift car. I wrecked the GTS as I found a crack in the drivers side strut tower and it got bad quickly.

Location: Gold Coast, Queensland Website: http://forum.r31skylineclub.com/index.php?topic=112197.0 Price and Payment Conditions: I am on the Gold Coast, QLD and happy to post smaller items, but will send bigger items if you organise the postage. Direct deposit or cash on pickup available. Contact Details: Andrew, 0448880550 Turbos [li]Trust/Mitsubishi TD06 16g turbo, good condition and minimal shaft play. $550 Made 366.7hp at 17psi from a rb25 (previous owner, Sikr31) I just bought this turbo and haven't fitted it yet, but I've bought a bigger turbo.[/li] This is the dyno sheet of the TD06 when it was on the previous owners R31 (rb25, microtech lt8, bigger fuel pump, intercooler and exhaust) FMIC's [li]Hybrid Limited Edition Intercooler 450 x 300 x 76mm, 3" inlet and outlet. Never been used. $350[/li] [li]Hybrid Limited Edition Super Intercooler 600 x 300 x 76mm, 3" inlet and outlet. Near new condition. $400[/li] EOI P1 Buddy clubs front: 17x7 +34 225/45/r17 & rear: 17x8r +22 235/45/r17 $1,700 ono SOLD PENDING PAYMENT Ran 20mm bolt on spacers on the front to clear the 4 pot brakes, but had to flare the hell out of the front guards to fit them with my ride height. Ideally 10mm bolt on's would be better. Rears sit great on an Aus 31, but I had a shit load of negative camber on my HR31. Video of these bad boys in action Added Apexi power intake to suit rb25 afm. $70 (used but in good condition, came off a 33 and hasn't been used since) RB25 parts [li]S2 RB25det factory inlet manifold w/ throttlebody $150 [/li] [li]S2 RB25det AFM $120[/li] [li]S2 rb25 ecu $150[/li] [li]rb25 exhaust manifold $100[/li] Parts from HR31 pillarless GTS hardtop All trims available. [li]*SOLD pending payment* EOI s1 passage afterburners $450 if anyones interested, Good nick.[/li] [li]Roof lining $20[/li] [li]centre light $10[/li] [li]Map light $15[/li] [li]A pillar, centre and C pillar grey velour trims $40/li] [li]HR31 rb20det fuel pump $50[/li] [li]Hicas Pump $70[/li] [li]Front and rear seat belts $20[/li] [li]Rear view mirror $10[/li] [li]Holy shit bars x3 $5[/li] [li]Hicas PS reservoir $15[/li] [li]Auto headlights/indicator stalk $20[/li] [li]Auto windscreen wiper stalk $20[/li] [li]Electric climate control unit $50[/li] [li]HR31 radiator $60[/li] [li]Washer bottle $15[/li] [li]Electric mirror switch (fold in mirror type) $25[/li] [li]Blitz (has blitz badge in the middle of the dual funnel but I doubt it's genuine) used $15[/li] [li]Handbrake lever and cable $40[/li] [li]Pair GTS-X mirrors great condition (black & gunmetal grey) $100 Parts from HR31 pillarless Passage GT [li]HR31 cable climate control setup complete(Just the climate control setup minus air con piping, ac pump etc) $200[/li] [li]HR31 turbo dash cluster (lights up white) good nick $120[/li] [li]Warning lights $30[/li] [li]Dash cluster surround, all warning lights, clock & has perfect nick Hazard, demister, parker, rear windscreen wiper & dimmer buttons, The radio buttons have a few scratches $120[/li] [li]Blue dash and glovebox $50[/li] [li]Double DIN surround $20[/li] [li]Mint condition blue Passage GT steering wheels (x2) $70 each[/li] [li]HR31 Gts/Passage (pillarless) electric window setup. Motors, wiring, switches etc. $300[/li] [li]HR31 Gts/Passage (pillarless) doors and glass (minus trims) $250 for all four.[/li] [li]HR31 Gts/Passage (pillarless) Bootlid $100[/li] [li]HR31 Gts/Passage (pillarless) Non hicas powersteering rack $150.[/li] [li]HR31 Rear view mirror $20[/li] [li]Z31/HR31 Longnose R200 3.7 open diff and driveshafts $350 ono. [/li] [li]Blue passage GT interior (velour front and rear seats and doorcards) $350[/li] [li]Passage GT dash $250 ono complete with turbo dash cluster. (Can seperate if required) Please forgive the unfinished dash, it does come with Double Din cd surround, steering column surround[/li] [li]Passage GT centre console with factory cassette stacker lol $70[/li] Misc parts Apexi 60mm EL mechanical boost gauge w/ apexi gauge cup. $140 (black face and lights up blue, misplaced power wire however) [li]Exedy HD organic clutch with daiken pressure plate, good condition $300[/li] [li]Silhouette sunvisors $25 for the pair[/li] [li]Custom gearbox crossmember to suit rb25 5spd conversion in a Pintara. $50[/li] [li]7kg/400lb Coilover King Springs $150 relatively new. Includes front height adjustable Tien s13 coilovers (no inserts or top hats)[/li] [li]Autogauge 5" tacho w/ standard Yellow shift light lens + Autometer blue shift light lens $150 ono [/li] [li]VDO boost guage $50[/li] [li]Blitz Supersound Blow off valve $150[/li] [li]Autotechnica steering wheel $50[/li] SOLD Parts [li]*SOLD*HR31 cruise control setup complete (includes stalk, cruise control unit, cable and possibly wiring) $400[/li] [li]*SOLD*Garrett VG30 ball bearing turbo (larger op6 rear housing, steel compressor wheel, ceramic rear) Only ever ran 9psi since i've owned it. Includes inlet elbow and dump. Great condition $400 [li]*SOLD*GTS front and rear seats (grey) with Electric lumber support inc module $250[/li] [li]*SOLD*Aus rear bar & rio *perfect nick* $50[/li] [li]*SOLD*Oil Catch Can $50[/li] [li]*SOLD*Complete TI front end (Import guards inc. guard lights, radiator support & cable, mint s3 front bar, TI grill, s3 headlights, fillerpanel, bonnet $400[/li] [li]*SOLD*Complete electric window conversion $200 includesBlue TI doorcards in good nick, switches, motors & wiring[/li] [li]*SOLD*HR31 hotplate taillights with Aus garnish $150[/li] [li]*SOLD*Rear Koni Orange adjustable suspension $200[/li] [li]*SOLD*RB25 turbo manifold, modified to suit external gate $100[/li] [li]*SOLD*1992 gts4 ECCS Silvertop Rb20det *Blown headgasket, comes with exhaust manifold, inlet manifold, ecu, new gates timing belt, complete loom modified by Kev Rowley to plug straight into a R31, modified sump, coils, ignitor, AFM. Only missing turbo & lines & water pump. $450 did a 13.91@102mph with a vg30 turbo @ 9psi. Over the next few weeks I will be replacing the headgasket $600 with a new head gasket[/li] [li]*SOLD*Apexi SAFC and wiring $200[/li] [li]*SOLD*Pair of 17x8 Work Stitch? mesh rims with semi slicks *unsure of offset, possibaly +38, rims have gutter damage on the lip[/li]

I spotted a black s2 33 and a white s1 33 on the m1 near beenleigh south @ 5.30am. The s1 followed me for awhile. I also spotted a white 34 gtt with a sheila driving (Miss Niz?) in Sherwood around 3.40pm.

I spot so many farking 33's every day on the m1. I spotted a black r34 gtr with bronze ray's wheels, had split torque converter obviously as it liked to spin the rears a lot

Got specs of the muffler? Inlet/outlet etc. What brand? Cheers