rb26 r33

Price dropped to $12,000 negotiable

97 r33 w/ RB26 highmount 430hp looking at selling my 430hp rb26 r33 skyline, have had the car for around 4 years and since than i have just been using it as a daily and slowly trying to get more power out of it, it was on its way to making 500hp when i didnt realise the wastegate spring maxed out at 20 pound. engine has been well looked after with oil changes every 5k, unfortunatly im not really focused on looks so the front bar could do with abit of repair work. apart from that the exterior is tidy, interior is in great condition and still has the original mats, steering wheel ect, located in fraser Coast, QLD contact: 0438 016 754 Looking for 15,000 negotiable engine RB26 r32 engine rebuit with crank extension new n1 oil and water pump 6boost manifold garret 35r turbo 50mm pro gate wastgate 4in apexi exhaust with Vband downpipe splitfires coilpacks custom oil catch can setup brand new radiator hoses Aluminium radiator front mount intercooler brand new adaptronic modular ecu fuel pressure sensor for tunning brand new boost solenoid deleted all un-used vaccum lines and waterlines and got it tune with map pressure for a better idle. deleted standard oil warmer to reduce clutter relocated fuse box into center console Fuel Turbosmart 1200 FPR Id1000 injectors twin Bosch 044 3L surge tank setup race works billet fuel rail fuel pressure sensor custom braided lines in engine bay Suspension Tien coil overs adjustable rear lower control arms adjustable rear camber arms adjustable castor arms Exterior slim line boot wing roof wing series two lip extension standard weather shields ssr meshies

WTB: r33 gtst aircon pump and bracket Wtb a r33 aircon pump and bracket! Summer in Queensland is too damn hot! Would also be willing to buy a r32 gtr pump and bracket Location fraser coast price: cheap!

Gts-t but with a r32 rb26 so not really sure what pump to go, was just going to buy any and hope for the best

R33 air con pump and bracket Wtb: r33 aircon pump and bracket, not looking to pay much! Location; Fraser coast

Got a spare hour to work on the catch can setup, managed to get the other hose sorted out. Catch can setup done! Twin bosch 044 should arrive sometime this week to go into my AI fuel setup and start fitting that put in the boot!

thanks! the main aim for the build is reliable/ comfortable daily with enough power to hit the track a few times a year. Here's a couple of photos from rebuilding the omanifold area. powdercoated! raceworks fuel rail, ID1000! Older photo before covers where stripped and catch can setup was mounted!

My pride and joy r33 w/ rb26 Thought it was a good time to start abit of a build thread, have had my skyline for just over three years now and have went from a standard low mount setup to twin high mounts and now a single twin high mount setup. engine RB26 r32 engine rebuit with crank extension new n1 oil and water pump 6boost manifold garret 35r turbo splitfires coilpacks custom oil catch can eplaced radiator hoses Aluminium radiator front mount intercooler Fuel Turbosmart 1200 FPR Id1000 injectors twin Bosch 044 3L surge tank setup race works billet fuel rail Suspension Tien coil overs adjustable rear lower control arms adjustable rear camber arms adjustable castor arms Exterior slim line boot wing roof wing series two lip extension ssr meshies Just added a old photo from QR and a more relevant engine bay picture for now, still need to powder coat rocker covers and finish of catch can setup

hey guys, my power window shit itself and trying to get it to go down in a fit of rage i manage to break the mount also. im after everything in the photo and cant afford to much to fix it located Queensland, Fraser coast!

BUMPTY! BUMP!

selling a black r33 half cage. i will post up some pictures first thing tomorrow. Not sure of brand but i will post up some pictures of the markings that are on it so you can see for yourself Price: 390$ Ono location: Hervey Bay Contact: 0438 016 754

BUMP!

clearing out a few spare parts i have sitting around. Location Fraser Coast price: on each item all are ONO can seperate if requested postage at buyers expense. contact on 0438 016 754 for more pictures or more information. r32 GTR Twin turbo high mount setup fully custom setup - 650$ ONO 2x manifold 2x dump pipe 1x Y pipe for both dumps 2x intake from turbo to airflow meters 1x setup from intercooler to turbos -Pictures!! -Will swap for 6x genuine ID1000 injectors R33 rb26 Standard turbos not including oil drain - 100$ each ONO r33 GTST ignition and barrel - $50 Standard rb26 manifolds, manifold shields and 02 sensors - $100 ONO r33 series 2 headlight poor condition - $30 ONO r32 GTR intake pipes - $150 ONO r33 GTST rb25 coilpacks missing and unknown condition - 50$ ONO BM44 Nissan brake slave - $50 ONO Standard r33 GTST wing - $70 ONO random catch can poor condition - $25 ONO r32 GTR engine mounts - $50 ONO r32 GTR standard cam gears - $80 ONO 2x airflow meters - $50 each ONO

Still for sale?

Bump!

Also interested in manifold pm me if still avaliable

Bump!

Hey mate I'm super keen on this give me a txt on 0438016754 if you want to get rid of it

Hey mate intrested in separating one of the actuators? Give me a txt on 0438016754 if you are

PRICE: $1200 ono without afm and pods LOCATION: Fraser coast CONTACT: txt 0438016754 DISCRIPTION: today I have a fully custom rb26 twin high mount setup for sale! the kit includes 2x custom high mount manifolds 2x custom dump pipes 1x custom Y pipe 2x custom intake pipes (rougher quality compared to the rest of the kit) 2x custom oil return hard lines custom and very accurate 1x custom intake Y pipe 2x great condition rb26 r32 stock turbos with minimal to no shaft play fully custom water and oil lines with lots of speed flow fittings can include twin z32s and pod filters to match for extra also has any other parts you can think of for the turbo setup that I may of forgotten this kit is an extremely custom rb26 twin turbo high mount setup that all lines up perfectly and works extremely well, the kit it currently bolted up to my rb26 setup so visual inspection is available along with seeing the car drive, a deposit will be required before removal of the setup the waterlines are a fully custom setup with a lot of speed flow fittings and a few cheaper fittings because they ran out of speed flow fittings at the shop, a few of the lines where damaged when I ran them a bad way but there is no leaks or anything just visual damage. I am upgrading to a large high mount single turbo setup so I will consider swaps for a large genuine turbo or a nice single turbo manifold for a rb26

might be blind but cant see a price, how much you chasing mate?

also instrested on stock rolling shell price.

hey everyone, I have upgraded my stock turbo setup on my rb26 and now the stock water lines don't match up and I need to get custom lines made. My question is what is the best way to do this? On the 26 the water lines go from the front of the engine to the rear and the turbos are teed into that line, can I just run a line from the front split it into two and delete the rear return and just return all the water threw the turbo returns. I like to keep things how they where designed but it will look messy and cost a fortune for all the fittings if I retain the top return pipe that doesn't look that important. if use can not understand what I mean I will get a photo to help explain. thanks for your time

hey mate thanks for the reply i was not aware of the eletric hicas system, yeah im 100% sure its the racks that keep blowing on both sides of pulled it apart and looked inside and the power sterring fluid is leacking out

just been cleaning it up for awhile runs like a dream now, no engine issues at all. bought a new wing for it love the new look -new slim line wing