Search the Community

Hey Guys, So I've searched the forums for similar issues and haven't been able to find much information. I'm currently trying to fit a set of 18x11 +20 Concave Concepts to my Gts-t and have purchased and installed a set of Front Upper Camber Arms to try and pull them in a little as they poke on my Gts-t guards quite a bit as pictured. Although since doing so have run into a few problems. 1. After adjusting the camber it looks as though the wheel sits further back inside the arch towards the back of the car and is now rubbing quite heavily against the guard/sideskirt mount when turning. (I'm thinking caster arms will fix this as I assume the caster is all out of whack) 2. After adjusting the camber the inside of the wheel looks like its sitting over the coilover (above the lock collar for the base and below the lock collar for the spring) and over hard bumps the coilover compresses and hits against the inside of the rim. 3. At full lock, or close to, the inside of the rim rubs up against the upper wishbone and makes a horrid grinding noise (I have since notched out the wishbone but apparently not enough because it still does it) I tried fitting a set of 7mm slip on spacers to fix the issue but they pull the wheels out a little too far and create all kinda of rubbing issues on the guards. Has anybody had any similar issues, or have any constructive suggestions/can help at all? Thanks.

18x11 fitment on 32 gts Hi guys, Just curious to see if anyones gotten close to these specs on their R32 gts/gtst. Wheels are 18x11 +8, will be running a 225/40 tyre and -12 camber on the front, -6 on the rear. Don't worry this is all for a show in 6 weeks, no way in hell I'm driving like this anywhere. Just wanted to know what tyre/camber others have had to run with 18x10.5 or even 18x10 Cheers.

Hey guys wanting to either sell outright or swap my TE’s for STRICTLY 18x10.5 or 19x10.5 square sets. Cash either way is fine depending upon the wheels. They are wrapped in next to new Hankook Ventura RS4 semi’s. Here are details; Brand: Volk by Rays Engineering Model: TE37RT PCD: 5x114.3 Width: 11J Offset: +17 Condition: Used Tyre specs: 285/35/18 Location: SE Melb Quantity: Set Shipping: At buyers expense. They have been repainted gun metal grey, as they are originally red. Red is showing through on certain parts, and also has some minor gutter rush on a couple wheels. Priced accordingly. Happy to listen to offers.

Item: 2x - 18x11 +5 Work Meister S1 3P - 5" Dish Lip - BRAND NEW 265/36/18 Federal 595 Cond: Used Location: Melbourne, Victoria. Price: $1500 Contact: Zero Four Two 192 Seven Two Five Zero. Info: Bought these a while ago, but at the moment i just have no need for them and would rather get something a little less crazy in the offset department so i can run even larger tyres. Great for somebody who may want to run skinnier tyres, or for somebody who has the guards to fit them, The rims are in great condition, just slight wear around the lip from tyre changes otherwise no buckles or damage the insides are also immaculate condition no massive dirt or tire buildup always kept in great condition and still sparkle. Tyres are BRAND NEW and only worn out due to pushing the car around, Still have the stickers! These wheels were bought brand new from WORK Japan a few years ago id say they arent even 5years old, Not rebuilt like many other wheels you can see out there with extreme width/offset so its a good quality rim for the price! Currently fitted to my S14 and they fit up fine, guards have been pulled. Ill let the pictures do the talking as you can see they are a quality rim in awesome condition.

Hi Guys, I've got some new wheels on the way so I have no need of these anymore. They are TE37SL's that I had powder coated gloss white as you cant get normal TE37's in 11" wide. They come with 285/30/18 Federal RS-R's all round. Fronts have done about 100km and the rears have done about 1000km so a huge amount of tread on them. Also have some 50% tread Dunlop hard semi slicks that have plenty of grip left in them that can come with the rims if they go for the right price. Price is $3800 ONO and pickup is preferred but will post at buyers expense. Wheels located in Rouse Hill, NSW and my number is 0403858714. I put genuine blue TE37 stickers on them to replace the SL ones. I also have genuine blue valves and valve covers to go on just forgot to put them on when the tyres went on (to replace the red SL ones). Thanks, Brett