Search the Community

Hey I am after 2 genuine R33 GTR rims in good nick. Located in Sydney. (Travelling to Gold Coast in June) Peter 0405 524 326

HI EVERYONE UP FOR SALE IS MY BNR32 GTR 1990 MODEL WITH 794**KM 5 SPEED MANUAL. IT HAS REGO TO (5/2013), AND FULL RESPRAY IN CUSTOM BLUE INSIDE AND OUT. IT IS TIME THAT I LET GO OF IT HAS BEEN A GREAT CAR IT HAS THE FOLLOWING: HKS SUPER DRAGER EXHAUST UPGRADED STEEL TURBOS (N1 TURBOS) AFTERMARKET CLUTCH BRAND NEW NISMO BIG BORE CLUTCH SLAVE BRAND NEW CLUTCH MASTER NEW TRIPPLE CORE ALLOY RADIATOR NISMO THERMOSTAT N1 WATER PUMP N1 OIL PUMP (YES WITH A CRANK COLLOR) 17X9.5 KOYA DRIFT TEAKS GATES TIMING BELT KIT BILLSTIEN COIL OVERS GREAT IMOBILISER PRICE IS TO SELL $14000ono OR 20,000 FOR SWAPS AS IM MORE AFTER A CASH SALE

Cleaning out the garage of old parts. Have available: 1. GTR33 aluminium bonnet - $500 2. Blitz exhaust 3" Midpipe and cat back - $300 3. 2 x Buddy P1 racing rim. 10" Light. My car fitted 373mm rotors inside with AP Racing calipers - $500 the pair Based In Melbourne. SMS or Trevor 0418973694

Can someone please suggest a size wheel, width and offset for me to put on my r34 25gt that will fit flush, inside the guard and have a concave/deep dish feel to it, I'll be extremely thankful cheers guys I am chosing between Varrstoen 2.2.1 Rota grid Rota P45R Koya drift tek if you have pictures that be wicked cool if you posted them

Hi Guys, I have for sale a set of four genuine R32 GTR V-Spec Wheels which I believe are quite rare to come by These are a forged BBS wheel and have a PCD of 5x114.3 and are 17x8+30 They are in very good condition with minimal rash which is rare for a wheel that is 20 years old They have been painted grey with peel coat or plastidip They come with centre-caps (don't think they are the original ones) Reason for selling is I don't want them sitting around and I'd rather the money for my engine build BRISBANE $1000 SMS 0432 589 800 Cheers

Hey guys just wondering... these look like work rims but not sure can you tell me what make and brand? thanks...

Hey Peeps, The name's Nudge, I'm a newbie on here but have been playin with skylines and other cars for yonks! I've just picked up another 31 with minor front end damage and need some bits n pieces. Parts needed include passenger headlight and guard, also a bonnet would be sweet. Preferrably the factory dark red, but hey beggars can't be choosers so I'll take anything and just paint it myself Any help would be much appreciated. I'm also chasing some mags, currently have the silhouette ones on but looking for something with a bit more wank factor

I really want to buy Rays/Volk te37's in black. Anyone have any tips on where to buy authentic ones? Can't find a place in Australia that sells them, do I have to import them from the manufacture themselves? Cheers.

2 x Gmax Enigma Wheels 5x113.4 18 inch x 8.5 dish Follow attached link: http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=150816344402#ht_500wt_1287

Hey Guys Here I have my 17" Advan (AVS) Model 5 with 255/40/17 tyres at the back 17x9 with 38' offset and 23540/17s at the front 17x8 with 34' offset. Wheels came off my R33 which I sold. I wanted to keep the wheels for my new project but they wont fit. The wheels have had a good wash and polish so they shine like new. Tires do need replacing and price is FIRM on $500 (Bloody bargin for a set of rims in this condition) Pictures can be found here http://www.ebay.com....9#ht_500wt_1413 text me 0413 659 566

Hello Skyliners For sale are my BBS Challenger 19 inch rims coming off an R32 Skyline GTR Vspec (Brembo brakes) Selling due to moving to smaller and lighter wheels for track and the rims being staggered which isn't good for ATTESSA..my loss is your gain!!! Rims are BBS Challenger Stud pattern is 5x 114.3 Front : 19x 8.5 CH004 (BBS reference), Tyres are Zeetex 245/35/ZR19 Rear: 19 x 9.5 CH005 (BBS reference), Tyres are Zeetex 275/35/ZR19 I don't know the offset as the rims came with the car when I bought it but they sit very nicely and fill the guards as per the photos...there's no scrubbing at all and my guards aren't rolled. I do have some camber though : ) No major gutter rash but have very very slight scratch on one rim which can't be seen unless you look very very hard previous owners fault. Price $2900 but slightly negotiable Give me a call- Dennis 0400370477 or sms as i'm at work most of the time or email at [email protected] Would prefer pick up in Victoria (South East suburbs please) or if you can organise postage i'm happy to drop them off or have a courier pick them up. Thanks For Looking D.

Putting this ad up on behalf of a friend details below. Up for sale 18" Rota GTR-D P45R3 Deep Dish Rims Stud Pattern: 5x114.3 Size/Offset: 18" x 10" +12 Tyres: Front: 225/45/18 Bridgestone Potenza (Thread: 95%) / Rear: 245/45/18 Yokohama S-221 (Thread: 90%) Made in: Philippines Colour: Matte Black Item Location: Wheelers Hill, Victoria (Freight can be organized by buyer) Price: $1000 (Tyres alone cost me $1000) Comes with a set of hub-centric rings that fit a Toyota Supra (71mm outta, 60mm bore from memory) Will sell a pair for $500, or swap for 18x8 or 18x9 of the same wheel. Contact: 0407 018 388 (Sean)

Selling set of four skyline r33 rims. Repainted black but it's a very average job, two have tyres on the markers, two have near new tread. Asking $200 negotiable, located sunshine coast msg me for more info. Stuart 0431575051

Hi all, I have decided to part with my road set of rims for my GTR. These are the four Volk Racing Winning 'Y' spoke rims that I bought my GTR with, in 18 x 9.0 size. They are a +22 offset to suit a GTR although I believe that they may fit a GtsT. Two rims are in excellent condition with only minor marks but the other two have some gutter rash and other marks on them (please refer to the photos for condition). All rims have their original labels and decals and I am including the Rays centre caps as shown in the photos. These are located in South East Melbourne, Victoria and I would prefer pick up. $900 ono Please message me back through SAU and I will provide a mobile number to those who are interested. [sharedmedia=cor e:attachments:490368]

Hi, I bought this exhaust manifold while I had a Datsun 280ZX with a RB20DET installed, I ended up selling the car and have no use for this so want to sell it. It is a top mount stainless steel exhaust manifold with 2mm wall tubes to suit the RB20DET but it should fit most if not all RB engines. It has a T25 flange to fit the Garrett GT2860RS and has a polished finish. It also comes with a sheet stainless turbo heat shield (shown) and no waste gate (as I was going to use it with a GT2860RS) but you could mod it to have one if need be. It is still in the box it came with, and is completely new, never used. I am now building a car from the ground up and as I have no use for it and would like $380 for it + Shipping, if you are interested in this and in the Sydney/Wollongong area I can arrange a pick-up, otherwise let me know where you would like it shipped to and I’ll find out how much it will cost to post to the address. I am also trying to sell a set of Pro drive wheels they are 17” x 8.5” with a 5x114.3 stud pattern and 34mm ET offset originally off an EVO. They are too big for the car I'm building otherwise I would use them in the design. I’d like $1500 (think these rims are about $3000-$4000 new) for the set. Or if you would like both the wheels and the exhaust I will sell both as a pack for $1800.

Here for sale is my r32 gtr wheels for sale comes with roadworthy tyres and mint condition. Can send pictures jus send me phone numbers and ill send u a pic.... $750 Pick up in south east Melbourne Can deliver at buyers expense

Buddy Club P1 Racing Wheels - Very Rare & Light weight (Made in Japan) 5 x 114.3 17x8 +27 17x9 +34 Originally white, used as spare set of track wheels. Powdercoated black. Comes with all valves and caps. No gutter rashes or buckles. PRICE: $1000 ONO Can freight with a reputable company, have done so in the past without any hassles. Here is the same rims fitted to an S15 TEST FITTED (Running 255/40/17 rears and 225/45/17 fronts) Some more pics of fitment

Hi All, Looking at off loading my set of GTR R32 rims (i.e. full set of four). If you weren't aware, they are forged rims in 16x8+30 and are very light. This set took me a while to hunt down, as a requirement was that it needed to be mint with no buckles and heavy gutter rashing. I've had a set before a few years back (sold) which I thought was great condition for its age, but this current set I have is even better. There are only minor rashing/stratches on two of the rims, and I think you wouldn't find any better. They come with 225/50R16 Kumho KU36 rubber. Rubber is about 60%, although one of them has a flat spot. Not keen on seperating as I will have no use for the rubber. It's priced to sell anyway, people are wanting the same price just for the rims only! Refer to the attached pictures. Two close ups of rims are the worse of the set. The other two are pretty much immac. These pictures are from the bloke I bought them off a few months back (hope you don't mind). I bought them and went straight into the garage for future track purposes but it won't be in the near future hence selling them off. I've also got TE37's which haven't sold so deciding to keep them instead, as such the GTR R32 rims need to go. I'm after $600 pick up for the lot. Cheap for a quick sale. Prefer pick up, but interstate buyers let me know a postcode for freight costs. These are also advertised elsewhere but will advise once they're gone. Genuine interest via pm or sms zero four two one, one two one, eight one eight. Cheers, Andy

19" BSA 291 Chrom Rim's with Sports Comforter Tyres. Near new! Never been driven. Bought as a gift! Pickup Only. Email for Inspection.

Hi All, Selling up some of my wheel collection, Item located in Sydney but can shipped nationwide. Contact via pm or 0410 583 744. ------------------------------------------- Item: Amistad PCD: 4 & 5 x 114.3 Size: 18 x 9j +20, 18 x 10j +20 Offset: +20 Condition: Great condition, tyre package can be arranged if required. Price: $1200ono IN STOCK ------------------------------------------- Item: R33 GTR Rims PCD: 5 x 114.3 Size: 17 x 9 Offset: +30 Condition: Great condition, Road Tyres included Price: $1200ono ------------------------------------------- Item: Medusa PCD: 5 x 114.3 Size: 18 x 9j +25, 18 x 10j +26 Offset: +25/+26 Condition: Great condition, minor gutter rash, tyre package can be arranged if required. Price: $750 In stock ------------------------------------------- Item: Linea Sport Crimson PCD: 5 x 114.3 Size: 19 x 9j +20, 19 x 10j +13 Offset: +20/+13 Condition: Great condition, tyres are currently 245/40/19 95%. Price: $2800ono ------------------------------------------- Cheers Phillb

[QLD] FS 18x9.5+12 x4 Black Volk TE37s (Genuine) Hi All, My new wheels have arrived at customs in Sydney so I've decided that the TE's are now for sale. Rims were originally anodized bronze and have been repainted black. They have been used for about 2000km's since being refinished. Few little marks on the paint from tire fitting but absolutely no guttering or dings. I still have some of the original rays stickers from the barrels but anyone that knows me or has read my threads on here would know I don't buy fake shit. Come with brand new black alloy Project Kics valves fitted and 3 of the original Rays valves in black. Also have 4 brand new unopened Rays TE37 sticker kits in blue which I haven't fitted as I may keep the wheels and color change if I can't get a decent price for them. Falken FK452 225/40/ZR18 tyres have been fitted all round and are still probably around 95%. They've also only done around 2000kms. I've posted up pics of them fitted on my S14 but if any serious buyers want detailed pics I can arrange this on the weekend. Import monster has a bare set of these in bronze with some of the stickers missing and a few marks through the anodizing on the lips for $3000 and I have seen other bare sets privately for sale in used condition for $2500 (Even some sets of 17s in same width and offsets) My set includes: Brand new Genuine Rays TE37 sticker kits x 4 still in packet which cost me $100 Project Kics new black aluminium valves fitted which cost around another $100 3x original black aluminium Rays valves (one has been misplaced) Near new Falken FK452 225/40ZR18 fitted all round (top of the range Falken road tyre) which cost me $1000 fitted and balanced. Price is $3000 pickup from Brisbane or Sunshine Coast in QLD. Transport may be arranged at buyers expense if I don't have a local buyer. If you want any more photos please PM me or post here. I'll give out my phone number to serious buyers once they have PM'd/posted.

Item: 4 x TE37 18x9.5 +12 wheels with Falken FK452 225/40/18 tyres. PCD is 5x114.3. Condition: Very good, no kerbing/guttering, a few knicks from use and tyre fitting/wheel balancing. Have been powdercoated black over the bronze anodizing by previous owner. Tyres have done 2000km of normal driving. (No skidding and no track time) Location: Sunshine Coast, QLD. Price: $2750 pickup or buyer pays transport costs. Due to countless previous timewasters please read the following before contacting me. While I would like to free up some extra cash, I've just applied the genuine decals and quite happy with how they look on my car now so if I can't get what I consider to be a fair price for the wheels I'll keep them. Please don't contact me saying you bought your last set for $2200 so you'll give me that much, it really doesn't interest me. If you want another colour, buy another colour, there are other sets for sale. If there's a set that some guy on another forum has for $500 cheaper, buy his then, I don't really need to hear about it. I'll entertain offers close to asking price for pickup only. Pics: This is what the wheels owe me for those that are interested. $2500 for bare rims w/o valves/decals or tyres. $1000 for tyres fitted and balanced. (Review here http://www.1010tires...s/Falken/FK-452) $100 for Project Kics black valves. $100 for Genuine Volk decals. Contact via PM or reply in thread. I'll give phone number to serious buyers as I'm a bit sick of $2000 cash sms's. Thanks Jamie

Alright guys I have a set of Rays Lug Nuts which are the Extended Type (50mm) not the standard (35mm) set. I purchased these last year but discovered they do not work on LMGT3's (I don't think any LMGT rim) so I had to get Nismo ones instead. I paid around $250 for these and these have never been fitted so I am chasing around the $200. Willing to post for extra.

Hi All, I am selling my beloved Enkei RPF1 18x9.5 +15 wheels due to financial constraint. I bought these back in October last year and got them from the states for $1800. Wheel: Enkei RPF1 Size: 18" Width: 9.5" Offset: +15 Colour: Matte Black I can get more photos on request but you all know what they look like. Looking for $1500. I have only unboxed one of them to see what they look like! NO trial fitting. Comes with everything that comes in the box originally. Have not removed anything. Does not come with any wheel nuts/hubcentric rings/tyres. You will need to get these yourself. Located on the Northern Beaches, Sydney. Can post interstate at buyers expense. Pick up preferable but i can meet somewhere central e.g. homebush.

Selling my CR Kai's as above. Rims are 17x9 in gunmetal grey with some minor gutter rash. 2 of the tyres are falken's and are rooted, and the other 2 are Fulda Exelero's and have about 70% tread or more. No idea what the offset is but they fit my GTR as you can see. Chasing $1200, will consider trade for Nismo LMGT1's in good nick, or maybe some other white rims. Here's some pics (wheels are currently off the car and ready to go) please PM if interested.