Search the Community

Hi i was wandering if anyone knew the banjo bolt size off the turbo water outlets, i upgraded to a highflowed 45v2 from a standard 45v1 and the banjo bolts on 45v1 are bigger i bought some online of the size smaller and they were too small. plz help as im stuck.

Rb25 Neo oil feed Hey guys! Before I get flamed, yes I have searched but there's too many conflicting answers! I have an rb25de neo I'm putting a r34 Op6 turbo on, I am wondering if there is a restrictor in the oil feed banjo bolt as well as the stock oil line? I have been to Pirtek and they have made me a braided oil feed line with the correct fittings but they have put the restrictor at the oil filter end. Do I need a banjo bolt with a restrictor too? (haven't got the stock bolts). And does it matter that the restrictor in the line is 1200mm away on the other side of the engine? pics are of standard oil line, the hole on the turbo side is very small (is this the restrictor?) and the other end - engine block end is quite large. Some people say theres even a restrictor build into the turbo? if one of you skyline gurus could confirm this that would be great! Thanks in advance!! ?