Search the Community

Thank you for taking the time to view this 1996 R33 GTS-T (series 2) Nissan Skyline. Everything in this vehicle is stock, except for the pod filter and genine 17inch BBS wheels, as per the photographs. This car has been carefully maintained by a meticulous professional. It has done a bit of distance due to commuting between Melbourne and Traralgon on the freeway for work purposes. However, it has been serviced regularly and has had a recent 200,000 km major service and timing belt change done (proof provided). Unlike other similar models, this car comes in excellent condition and is very clean inside and outside. Selling due to new company car. Sale will include Alpine headunit (not installed) and an aftermarket intercooler (not installed. Removed for insurance purposes. Currently has a stock intercooler). It also includes genuine 17 inch BBS wheels as per the photos. Kms: 210,000 Rego: Until September 2013 Price: $8,800 with RWC Car is located in the S.E Suburbs of Victoria Price is negotiable, but genuine enquiries only please. Please call Charith 0421 111 020

WTB: BBS LM Wheels 17x9 +20 As per title, also looking for a set of BBS LM 17x9 +20, or perhaps 18x9 +20 PM if you have any that you would like to sell

Skyline V36 coupe - Wheels offset fitment Just like the sedan thread, rather than store all the pics and info on my computer I might aswell put it all out on the net for others to use.... Skyline v36 coupes actually have wider arches than sedans, hence a new thread 285/30/20 on a 10" wheel +32 offset

hello! i ordered a set of these for my r33 gtr. for the hub centric ring it comes with, all i see in the documentation is PFS for the bore size. the model i ordered is LM086, which has the following specs: 18x10.0 20 offset bolt pattern is 5x 114.3 bore size = PFS I have no idea if the hub centric ring that ships with this is going to fit my vehicle, since there is no actual size noted. does anyone know if the 'PFS' that ship with these will work, or do i need to order a set of rings separately? does the PFS that is included close the gap between the LM bore and the 66.1? thanks in advance.

Hi Guys, It is with great regret that i write this post. I had bought a mint condition 1994 R32 GT-R from the auctions in japan a few months ago and was waiting in anticipation for its arrival in Sydney. It did make it to the port in Wollongong (Port Kembla) where it had been for the past week awaiting clearance. On friday i was notified by the freight company that the car had cleared customs and would be shipped to the compliance workshop early this week. Then today i received a call in which i learnt that my car had been stolen from the docks. After waiting around 9 weeks since purchase and being so close to acquiring my car, you can understand how i am feeling at this point in time. So, could you guys please keep your eyes peeled for a a silver 1994 R32 GT-R with 17" Gold BBS LM's. its fairly stock so i dont believe it would be stripped down and sold for parts. the car is fitted with a HKS EVC, has a small bubble on the left side of the dash and has around 85,000kms. Please help me find the crooks who did this! Thanks, Gian

The end of an era. Its a little bit sad, like when Nissan stopped making Silvias (Skylines are different, in one form or another, they continued.) I got this news from Motor Authority. The Final edition will not be based on the HKS built, 473HP concept they revealed last year. BBS, Bilstein, Eibach and Brembo handle the rolling and stopping. All of those words make me a little excited. Anyway .. the pics. So freaking nice. Opinions?

Hello, Not sure if its been covered on THIS site before, i had a small search and couldn't find a specific thread. Im looking at reverse mounting a set of these wheels when they arrive. They are currently in GTR offset of 17x9 +20 all round. Having googled many times in regards to this, i still am yet to find the 100% actual offset change that will occur. Some say 12.2mm, some say 10mm, and others say 15mm. Basically, im just wanting to know if anyone has done this, or knows of anyone who has, and what was the actual change in offset. I dont care if the rims you had done were a +35 etc, all im wanting to know is the correct change in offset when reverse mounting them. Cheers

hey guys, selling my FRESH slant lip BBS RS wheels. only reason is that i my car looks too low on 17s and want to lift it on some 18s theyre genuine GTR RS Slant lips 17x9+20 all wheel bolts cleaned and polished by HAND! lips refurbished and like new centres painted the silver from the s15s with a shitload of copper and blue pearl. looks very very nice. comes with tyres only thing left on them is polishing the hexs as i forgot them at home when i sent the lips off lol $3000ono i know you can get fakes for a quarter of the price, but if you want them go buy them. any posts indicating that fakes and genuines are the same shit, kindly gtfo my thread. thanks guys!

Hi Guys, An opportunity has come up for me to purchase my dream wheels so looking to move my other sets on (both will be ready in around 2 weeks).... first set; Nismo/Rays LMGT 2's 17x9 +20 all round recently refurbished (polished, new chromed stainless bolts) -centres stripped and resprayed in 32 gtr gunmetal, clear coated then stickers added and cleared again. Barrels have been sprayed in high temp clear to prevent brake dust from sticking. -New genuine rays valve stems -comes with new billet centre caps anodised black (i have a set of original centre caps that will go with as well some tabs broken). -comes with nismo wheel nuts ( only certain nuts fit these wheels) looking for $3800 ono BBS LM's 18x9 +20 all round going through a bit of a refurb currently barrels are getting the small amount of gutter rash welded up and re polished. -New black stainless bolts -barrels getting high temp clear coated -faces are in good condition (some have some chips) but can't find a colour match I'm happy with to respray them in so staying as original. -genuine black centre caps. looking for $2600 ono Again they are not ready yet but looking for some solid interest so i can put a deposit down on the other wheels. Can post at buyers expense, fell free to PM me if you have any questions. thanks!

BBS LM F1 18X10 +20 Super rare Japanese-made BBS! Only released for the Japanese market for an 8 month period back in the 90s Being the F1 version means they're finished in Gold all over rather than having the polished lip as per the regular BBS LM. These come with the rare red BSB centrecaps which were only available on the F1 edition. They're in very good overall condition, wrapped in Yokohama ad08r 265/35/18 Currently fitted on a r32 vspec with stock gaurds. Not rolled and clears the brembo brakes. Happy to ship Australia wide, can use ego depot to depot making it cheaper. $5000

Alrighty gang, up for sale are my set of BBS LM's in 18x9 with the faces reversed for a (estimated) +5 offset. Perfect fitment on an R32 GTR. Will also suit a whole range of 5x114.3 cars. I spent far too many hours getting these up to scratch polishing and flipping the faces (done correctly, loctite'd bolts and torqued to 30 n.m) so my loss (of time) is your gain. Two wheels have some rash on two wheels, two are fine. Tyres have almost full tread, but are very old. one tyre has a little chuck out the middle. Last pic is fitment on a 32R. Located SE Melb Please pm me or text on 0424four90187 for any more info or questions. Wont reply to texts tonight as I'm at uni cramming for exams with no service inside the buildings so pm's preferred.

Rs261 made for the 32gtr Genuine BBS RS 261. All with tags and markings. They have gutter rash, but nothing serious. Tyres aren't usable unless you don't care about your life. They're round with no dents/eggs etc. I spent a few minutes polishing one lip without removing the bolts, the pitting isn't very bad and came up easily enough. I'm just not interested in cleaning them up and I've been busy. So i want these gone quickly and easily. PM me with any questions. $1500 Canberra

Hi guys, Since selling the S15, I have some aftermarket parts which the new owner doesn't want. Located in Bexley PM if interested. Kevin - Replica V1 Top Secret Carbon Fibre Rear Diffuser (new) - $500 - Beame branded Clear side indicators - $30 - ADM Steering Wheel - $150 - Greddy Type FV BOV with adapter $150 - BBS LM 17x9+20 (silver centres) with 245/45 Bridgestone tyre (plenty of tread) - $2300 - Replica V1 Top Secret Carbon Fibre Rear Diffuser (new) - Clear side indicators - Greddy Type FV BOV with adapter -BBS LM 17x9+20

Nismo Cluster in good condition and working order. has the usual crack in the speedo cable connector, but does not effect operation. done 67779km. $580 Nismo Horn button in good condition $150 Nismo Cigarette light, its brand New never used. $230 BNR32 Vspec genuine BBS wheels with tyres. 17 x 8 +30 Wheels have been professional repaired and repainted to the original specs they're in perfect condition. Tyres are yokohama 225/50/17 DB decibel with 4mm and 5mm treads. $1300 Located at mortdale and happy to ship at buyers expense. 0449 292 986 thank you.

hey guys selling my BBS RS' genuine 3 piece wheels original bolts and slant lips recently refurbished, with one small mark on one lip centres were painted S15 Pewter grey with HEAPS of copper pearl through it sizes are as follows tyres- 225/45/17 wheels- 17x9+20 (rare GTR specs) looking for $1800 firm or trade for a set of 18x9.5s located in thomastown victoria Mohsen- 0411421097