Search the Community

Hi Guys, I've got r32 GTR, i've bought it with HKS coil-overs and a Nismo front sway bar installed as the only things done to the suspension, the bushings etc are all unknowns, probably 20 years old. The car is my primary car but isn't my daily due to my work, and it gets used for lots driving out of town, and will be used for occasional track days, nothing serious though. I've decided to redo all of the suspension bushings and install the basic set of adjustable arms, as this will probably suit my needs well enough, budget isn't the #1 issue here luckily so no having to make do with camber bushings etc. Anyway, i've pieced together a list of parts but i'd like some feedback on it, to make sure i've made good choices and to also make sure that i've not made any glaring mistakes (eg getting incompatible GTS-T parts) or missed something entirely (something on the front uprights?). Without further ado this is my entire parts list: Arms Front Camber http://www.hard-race.com.au/index.php?route=product/product&path=25_714_722&product_id=238 Front Castor http://www.hard-race.com.au/index.php?route=product/product&path=25_714_722&product_id=845 Rear Camber http://www.hard-race.com.au/index.php?route=product/product&path=25_714_722&product_id=185 Rear traction rods http://www.hard-race.com.au/index.php?route=product/product&path=25_714_722&product_id=183 Swaybars 22fr 24rear whiteline nismo 22mm front already in leave there do rear only? http://whiteline.com.au/product_detail4.php?part_number=BNK009 Bushes/ball joints Rear subframe bushes http://www.hard-race.com.au/index.php?route=product/product&path=25_30_622&product_id=486 diff supports, whiteline fr rear Verify diff mouting type Front LCA inner Stock lower innner ball joint http://www.kudosmotorsports.com/catalog/genuine-nissan-pitwork-ball-joint-front-lower-inner-genuine-nissan-nissan-skyline-r32-gtr-gts4-r33-gtr-gts4-r34-25gt4-p-280.html Front LCA outer Stock lower outer ball joint http://www.kudosmotorsports.com/catalog/genuine-nissan-pitwork-ball-joint-front-lower-outer-genuine-nissan-nissan-skyline-r32-gtr-gts4-r33-gtr-gts4-r34-gtr-25gt4-p-106.html Steering rack Poly bushes. Get stock rubber ones? http://www.kudosmotorsports.com/catalog/superpro-parts-steering-rack-bush-kit-superpro-nissan-skyline-r32-gtr-gts4-r33-gtr-gts-gts25-gts25t-gts4-p-1242.html steering rod ends/ball joints? only thing required for steering rods? http://www.kudosmotorsports.com/catalog/genuine-nissan-pitwork-outer-tie-rod-end-front-nissan-300zx-z32-071989-021996-skyline-r32-gtr-gts4-p-1259.html Rear LCA inner Poly. Rubber probably better for road use? http://www.ebay.com.au/itm/Nissan-Skyline-1989-1994-R-Control-Arm-Lower-Inner-Bushing-SuperPro-SPF1639K-/190916552502?pt=AU_Car_Parts_Accessories&hash=item2c73836736 Rear LCA outer stock ball joint http://www.ebay.com.au/itm/2-REAR-LOWER-BALL-JOINT-NISSAN-SKYLINE-R32-90-94-/190649239948?pt=AU_Car_Parts_Accessories&hash=item2c6394898c Outer Camber arm/UCA+Outer Traction rod same as camber arm, can use other pair for that? http://whiteline.com.au/product_detail4.php?part_number=W62546 other Front wheel bearings Decent brand? http://www.ebay.com.au/itm/TWO-REAR-WHEEL-BEARING-KIT-NISSAN-SKYLINE-R32-GTS-R32-GTR-4WD-R33-GTS-4432-/191386267395?pt=AU_Car_Parts_Accessories&hash=item2c8f82af03 Rear wheel bearings Decent brand? http://www.ebay.com.au/itm/2-FRONT-WHEEL-BEARING-KIT-NISSAN-SKYLINE-GTR-4WD-R32-91-93-R33-R34-95-01-4574-/201004989682?pt=AU_Car_Parts_Accessories&hash=item2eccd4bcf2 Hicas delete kit http://www.ebay.com.au/itm/HICAS-ELIMINATOR-LOCK-BAR-KIT-R32-R33-R34-SKYLINE-GTR-GTST-GTT-S15-180SX-/301363010419?pt=AU_Car_Parts_Accessories&hash=item462aa29b73 Secondly, i'm having a hard time deciding on sway bars. A few options, go the White-line drop in kit which has adjustment so i can mess around and dial it in, go a Cusco non adjustable kit and hope it works, or leave the nismo front in and get a new rear only. Honestly i'm not really sure what to do. I don't know the spring or damper rates of the coil-overs either, which would factor into the choice (stiffer springs means stiff sway-bars as far as I know) Thirdly, is there anything else i should be looking out for when I eventually do the work, apart from the obvious like bent LCA's etc. Any advice or wisdom would be appreciated.

Combination diff bushings Hi All, I recently installed some super pro diff and subframe bushings in my R33 but the front ones towards the tail shaft are sharted already (i would assume due to design - There is also another member on here that had the same issue with two different sets of the superpro bushings). So my question is it OK or will it be an issue if I run poly subframe, poly rear diff bushings and solid front diff bushings? I want to go solid to make sure this doesn't happen again Thanks in advance!!

Hi guys, I have for sale some parts I was going to use on my S15. But I sold the car, and I never got a chance to put them on. 1. NISMO S15/S14 rear differential mount kit. Part No. 55401-RS590. Everything is brand new and never taken out of its packaging. I'm after $220 for this. I'm negotiable, but no stupid offers please. 2. Nismo Rear Hub bushes. A set of 4. Part no, 55157-RS521. Again, brand new, still in packaging. These will suit RWD Skylines R32 & R33, S13, S14 & S15 as well as C33 and A31. I'm after $60 FIRM for these. 3. ISC Rear Upper/Suspension mounts to suit S14 & S15. I'm not sure if they suit other cars too. Brand new, never used. These have a polyurethane bush. I'm after $100 FIRM for these. 4. Honda Civic FD Type R Gearknob, re-threaded to M12 x 1.25 thread. This will suit S15, R34 GTR and other 6spd Nissans. I'ts been used, but not for long, and it's in perfect condition. No marks or scratches etc. I'm asking $50 negotiable for this. But again, please no silly offers. I'm located in Robina, on the Gold Coast, QLD.I am happy to ship, or post at the buyers expense. Cheers