Search the Community

Complete bolt on R32 GTR Brake upgrade for Series 1 WGNC34. 296x32mm rotor with calipers which I rebuilt 1500km ago with genuine Nissan seals. Held up fine at Winton and Sandown with 230kw behind them on semi-slicks. The best bang-for-buck brake upgrade you'll find. Rotors are near-new (~31.7mm) slotted RDAs and ADR-approved braided brake lines. Come with a set of Project Mu MAX900i racing pads with ~70% left. Cost $300 just for the pads. $500ono for the lot. PM me or SMS 0423 eight-hundred 325.

After some R32 gts-t front calipers (r32 gts-t suit 280mm rotors) Don't care about pads just as long as they have all plates and pins Cheers, Tim

Hello guys and gals. I am currently searching for a front set of Alcon V8 Supercar 6 piston calipers to fit to my R32 GTR. They need to be in good condition, as i dont want to have to rebuild them or change seals, i just wana bolt them up and go. If anyone has any, or if you know of anyone who has some that they are willing to part with, id be more than interested to have a chat. Contact me on here, as i am on here regularly. I know what they are worth and i have cash ready to go, so show me what ya got. Cheers, Damo.

R32 GTR calipers front & rear WTB R32 GTR calipers front & rear or R33 GTST rears

Want to Buy: R33 GTR Calipers Hi All, I'm posting from the USA hoping to find some R33 GTR brembo calipers. I'm looking for a full set, front and rear, for my 300ZX Twin Turbo. I'm ok if they need a rebuild. Don't need discs, I can find those stateside. Please email [email protected] if you have a set. I'll of course cover shipping costs. I live in the state of Washington, near Seattle, postal code 98004. Thanks!

As per the title, an EOI for any suitably priced R33 Calipers. located Melbourne, Victoria. please PM or reply here. Thanks.

WTB - R33 N/A ~ S1 Stagea Front Callipers What title says, wanting to buy R33 n/a or S1 Stagea front calipers. Anywhere in VIC, will travel

WTB- S1 Stagea Front Callipers As title says, wtb s1 stagea front calipers, prefer decent condition anywhere in vic, willing to travel. cheers.

Hi, think its time i take the calipers off and have them rebuilt. Any recommendations for rebuilders in Sydney that are decently priced? Thanks

Hi, I'm searching these models of calipers, Brembo and AP Racing, new or used: -Ap Racing 6 pot CP 4098; -Ap Racing 4 pot CP 7320. -Brembo 6 pot monoblock; -Brembo 4 pot monoblock SEE the LINKs for the detailed example/model. If you see the link, it is active! APracing CP4098 --> http://www.sitohd.com/siti/17907/foto/400928.jpg --> http://www.sitohd.com/siti/17907/foto/400927.jpg APracing CP7320 --> http://www.sitohd.com/siti/17907/foto/400929.jpg Brembo 6 pot (think Nascar) --> http://www.sitohd.com/siti/17907/foto/401816.jpg --> http://www.sitohd.com/siti/17907/foto/401821.jpg type 1 Brembo 4 pot, XA4 C6, (think Nascar) --> http://www.sitohd.com/siti/17907/foto/401818.jpg --> http://www.sitohd.com/siti/17907/foto/401819.jpg Contact me! Personal mail: [email protected] Thanks, Vittorio.

There's a question that needs answering, anyone know if the Infiniti G35 rotors will slide onto the R32 GTS-T? The reason I ask is because I had a 2004 G35 and I ordered a set of rotors for it in 2014 which I never installed. Long story short I'm hoping that someone who's familiar with the 350Z Brembo swap and other brake swaps can glance at this and confidently say "yeah that'll work" or "No, you idiot, it's a waste of time. The specs are: Front/Rear Bolt Size: 12.90 mm/12.70 mm Front/Rear OD: 295.70 mm (296 mm?)/291.80 mm (292 mm?) Front/Rear Thickness: 24.00 mm/16.00 mm Front/Rear Height: 49.20 mm/62mm Front/Rear Hub Hole: 68mm/68mm The below chart is just something I figured wouldn't hurt to have on the forum of disc sizes for OEM spec stuff in case anyone had questions. Can't get help without giving it too.

hello! i have been looking for information on how to rebuild the brakes on a 1995 r33 gtr. i would like to rebuild them myself, but i am having a heck of a time finding anything other than replacement seals. i am looking for replacement/ upgraded pistons, torque specs, the gasket that goes between the caliper halves, if any. i have searched for any kind of documentation on this, but i don't seem to find anything other than engine manuals. on the bremboparts.com site, they only offer replacement pads. no pins, shims, or anything else. does anyone have, or know of, a walkthrough of how to rebuild the calipers? does anyone know of a place to order replacement parts? as these are brembos that were widely used, i really thought all this stuff would be more readily available.

Our Mazda CX7 needs new front disks soon. We're driving to Jindy in January so I'd like to have new ones by then. Because I absolutely just can't replace part for part and NEED to upgrade I started looking at whether I could improve the brakes at all with some OEM items from another Mazda. And I can! The CX9 and CX7 Diesel both have 320mm disks compared to my CX7's 296mm. The only difference for the bigger disks are that the caliper brackets are larger. This means that with the larger brackets, I can run 320's. The problem is that the brackets are $270ea from a dealer and the 3 or 4 wreckers I've asked don't have them. So while I really want to do this upgrade I'm wondering whether its actually worth it. Will 24mm greater diameter with the same calipers actually make much difference? Thanks guys, Christian

Hey, sorry if this has been covered but I couldn't find it if it was. I need some help identifying the rear calipers on my R32 GTS (NA). It has the 4 lug hub and single piston real calipers. Does anyone have the part number of the caliper as well as those for the associated parts? My problem is that the lower slide bolt on the left hand side won't move freely, no matter how much I clean and grease it. It seems like the pin sits in a rubber sleeve that goes all the way through, is that right? If so I think I need to replace that sleeve as the pin looks to be in good shape. Does anyone know the associated part numbers or can otherwise identify the caliper assembly? I've attached a few pictures, thanks in advance!

G'day R34 GT-T standard brake kit for sale; Front brake calipers and lines, good condition Front standard rotors, good condition Rear brake calipers and lines, good condition No rear rotors Under 100,000 kms $200 Located Cloverdale, WA 0457 504 844 Cheers, Brendan

Set of Brembo R33 GTR brake calipers, lines and pads(front decent, rear pretty low) for sale due to selling the car they were going to go on. Last owner said he had them tested and they had no problems. Paint isn't great though $1000 for the set. PM me for contact number, located Gold Coast. Thanks

Im converting my R32's brakes to GTR, just curios is the stock master cylinder enough to supply the calipers Efficiently? Has anyone already done this conversion? and if so what parts did you use? - Cheers

I have for sale a full set of Alcon / Grex brakes for R32/33 GTR Front discs are 356mm, almost new and have no wear Rear discs are 315mm, and have a slight bit of wear Front calipers are fitted with Ferodo DS2500 pads and are about half worn Rear calipers are fitted with Pagid blue and are pretty new This is a full GTR set up, awesome stopping power This kit was removed from a high spec R33 in the UK, to be replaced with a full R35 set up $3750 NZD or near sensible offer [email protected] +64220447802

18 inch 370z wheels for sale full set of 4, fronts are 18 x 8 +43, rears are 18 x 9 +15, overall good condition, no buckles no cracks, tyres have 60% left, minor gutter rash. $700 350z brakes, these are the bigger non-brembo 06+ brakes, front rotor diameter is 320mm, larger than R34 GTt rotors, good amount of meat left in them (reckon around 70%), came off a 08' 350z Includes: rotors, calipers, pads, brake lines specs below: front rotor: 320x28mm; rear rotor: 308x16mm Front caliper: dual piston; rear caliper: single piston Cheap and a decent upgrade for non turbo skylines, fronts are direct bolt-on for r34 GT non turbo (with standard 14mm caliper bolt) and 03-06 non Brembo V35 and 350z (296mm rotors with single piston front and rear) Will need to enlarge the holes on the hubs by 2mm to fit non turbo r33 and maybe some non turbo r34, however, still a decent upgrade for a small amount of hassle Will not split the front and rear set, as it is cheap enough already $300 Pick up only, as they are bulky items

Hello, I have a full bolt on kit for 32,33 and 34 gtr. X2 380x40mm ap disc X2 355x32mm ap disc X2 Alcon racing 6 piston caliper, titanium pistons, monobloc. X2 Alcon racing 4 piston caliper, titanium pistons, monobloc. X4 pads front. X4 pads rear. X48 ap racing T-bobbin kits. X2 front hats. X2 rear hats with park brake provision. X2 front dog bones. X2 rear dog bones. X8 12-point caliper bolts. Price $8000 The ultimate brake kit for track dutys like timeattack, spare hats and discs available at negotiations. Can post world wide.

Have a full set of brembo calipers. Fronts new Rears used Current series used in gt sprint and endurance, nismo r35 gt3. Front XBO.64.01/02 Rear Xbo.L2.53/54 $8000 + freight

I'm doing a bit of a garage cleanout, to make room for more pressing things. Most parts are used, except for a set of front rotors. All parts to suit R33 GTS-T, though not 100% sure which series, though I'm thinking it's Series 1. The items and prices are as follows: Front hubs and knuckles. Pair - $250 4 piston front calipers. Pair - $180 2 piston rear calipers. 2 pairs - $150 per pair Rear hub and handbrake assembly. Pair - $250 Rear handbrake assembly with cables. Pair - $160 Front rotors used, still seem ok, with surface rust. Pair - $60 New DBA front rotors, vented and slotted. Never used, slight surface rust. Pair - $180 All prices are negotiable and open to correction. I've searched high and low for reasonable prices on all of these, but they all seem to contradict one another. So I've priced them in between and hopefully it's not too over the top, or I'm not ripping myself off. At this stage I'd prefer not to post anything, but if they sit around for too much longer I might consider it. Let me know if you're interested, and I'll return any emails or messages quickly. Thanks. (Sorry about the "Spoiler" stuff at the top, I have no idea how to delete them)

Ladies and Gentlemen up for grabs are my front and rear brembo calipers off my 06 Aus delivered Evo 9 which are currently still on my car and have travelled 73K only. They have basically brand new Intima SR pads in them (600-800km MAX) . Calipers have been sprayed yellow. 3 still look good 1 failed (issue with the clear coat) Calipers will be available in approximately 2-3 weeks time. (When my new brakes arrive) Brakes are located in Western Sydney area but can be delivered at buyers expense. Please contact Mick on 0423089277 $1300ono

Full set (front and rear) Mitsubishi Evo 9 Brembo calipers. All Brembos from Evo 5-9 are the same. Pick up from 3181.

Clearing out my garage after moving and seeing how much stuff I have. Stock R34 GTT radiator - $100 **Only replaced due to upgrading to a Fenix 52mm, no leaks Stock R34 GTT Thermostat - $15 **Only replaced due to upgrading to a Nismo item Stock R34 GTT rear camber arms (pair) - $50 Stock R34 GTT rear traction arms (pair) - $40 Stock R34 GTT front upper control arms (pair) - $80 Stock R34 GTT front swaybar - $50 Stock R34 GTT rear swaybar - $50 **Only replaced due to upgrade for adjustable parts Stock R34 GTT front brake rotors (pair) - $50 DBA4000 T3 series slotted front rotors (pair) - $200 Stock R34 GTT front calipers (pair) w/ Intima SR pads- $300 Intima SR rear R34 GTT brake pads - $20 HEL R34 GTT front braided brake lines - $60 **Only replaced due to upgrade, heaps of pad left on the front and rears Ferodo GP2 rear R34 GTT pads (brand new) - $20 **To confirm fitment - Part No. DB1144GP. I was given these when I purchased the car but never used them Unknown brand front Evo 5-9 Brembo pads - $20 **Replaced after fitting up the Brembos to my car, reasonable amount of pad left Stock R34 GTT center gauge cluster - $100 **Removed for fitment of Defi gauges Stock R34 GTT transmission mount - $100 **Only removed due to being replaced with Nismo item Stock S15 rear camber arms (pair) - $50 **Removed from my old S15 and replaced with adjustables S15 rear parcel shelf speaker grills - $10 BMC pod filer - $10 **Could use a clean and also has a screw hole in the end from a bracket, was given to me when purchasing another filter setup If you want a better picture of any of the items, or of any of the items not pictured, let me know, I've been meaning to post this for a couple of weeks and have just been lazy with taking photos so just wanted to get something up. Will happily get pics if anyone is interested though. All parts are located in Bathurst NSW, willing to post at buyers expense or alternatively meet as far as Lithgow (for multiple items) or Sydney/Canberra at a convenient time as I travel these ways often.