Search the Community

It's a simple idea that I've searched for many times. Simply post; Car: eg. 32GTR Brakes: eg. 355mm x 32mm 6 pot alcon bbk Wheels: 18x9 + 20 BBS LM Photos: eg. photo's of brake clearance ** Please not the above is an example only, the car isn't a 32 GTR and I can't confirm the size of the kit / wheel. The idea is to collect in one place a list of what wheels fit what brake kits to help members such as myself looking for the largest brake kit that they can fit under a certain wheel. If you have a big brake kit or run smaller then standard wheels (say 15" on a 32 GTR with OEM brakes) please contribute and help to make this thread a success. This will hopefully clear up any confusion about what will fit and what won't, it will also save people buying brakes that don't fit under there desired wheels. It's also a chance to be a brake whore. Willis

Rb25 Bearing Clearance Recommendation Currently Building a rb25 NEO for my stagea. At the stage of checking my clearances but have a few questions for some more experienced engine builders or hobbyists than myself. My over all goal for the build is a RELIABLE 600-700HP within a street application. Key word is reliable here I don’t plan on siting on limiter every time it starts im building it as a street car and plan to treat it as such, but obviously I still want to have my fun with it occasionally. Now the FSM states clearances between 0.02-0.04 mm (Big End) 0.028-0.46 (Mains). This is all well and good but as you can imagine Nissan chose these numbers based on a stock application needs. So I feel its fair to assume that using aftermarket race bearings, double the HP and a slightly higher rev limit would require a slightly different clearance. I’ve done some looking online surprisingly hard to find much info on recommended clearances. Even when I did they contradicted each other so here I am. If anyone has any advice, recommendations, stories and or numbers I would greatly appreciate it.

Hello All, I have a quick question, I just bought some wheels for my 4door skyline, they’re 17x8 +30 and the website I bought them from (figment industries) has a thing where you put your car model in and if it has stock brakes suspension etc in it and it gives you wheels that SHOULD fit. I bought the wheels and when I went to put on the front ones, the wheel spikes hit on the front STOCK brake calipers. I was wondering if anyone else has had this problem and if so how can I fix it or what wheels do I need to get/ specs so the spokes clear the caliper. My stock wheels already are very close to the caliper as is so I’m kind of lost as to what to do. It seems the stock caliper in the front are huge! Thank you guys, I also know that people have put rpf1’s on it because I’ve seen pics of gtst’s with them but idk what specs to get to have them not hit on the spokes