Search the Community

Hey All Looking for some advice on how to go about reshimming the LSD for my RB25, and also looking for some info on front and rear strut braces. So the Hicas is disconnected and I'm wanting to know what else I need to do to complete the mod? I'm also rebushing the whole rear support frame for diff as it's seen better days :S So could use some tips regarding what's the best to go with. If anyone's done this or wants to throw me some advice on how to go about any of these tasks let me know, would be super grateful! Going over my car and decided to remove cooler pipes on my Blitz front mount to check oil build up and noticed the front bar had rubbed a hole into the pipe itself, I slid a silicone joiner over the hole in order to patch it up. Wondering if this is an okay solution, because the pipes come with the intercooler kit and weren't exactly cheap haha Anyways to clean oil from intercooler system? Or is that not something I should worry too much about? Would like to relocate igniter from coil pack cover...any suggestions? Advice would be appreciated

Firstly Hi all, I have my project C33 laurel which was running the RD28 motor doing a 25DET conversion. Pertty much everything is done except the wiring, I have changed fuse box loom (from RB20E A31 cefiro) and cabin/dash loom (from RB20E C33 laurel). I have mannaged to get power to the dash and interior (windows, lights, heaters etc) but not getting any power to my ECU. Anyone able to help or guide as to what i may possibly doing wrong? cheers

hi everyone im having a problem in my car and im trying too work out what this relay is for because when the car has a short out this relay clicks nissan stagea rs4 awd auto part number is 25230 05u00 thanks

I am Looking for someone who has a R35 In the Brisbane area but I can travel but not something stupid like 4 hours. My partners 21st is in a couple of months and his DREAM car is the R35. Im wanting someone who can take 30 minutes of there time to take him for a drive ( You Drive ) and I am willing to pay for your time and fuel. It would mean the absolute world to my partner and he is a car enthusiast and he see's R35's at Queensland raceway and he just wishes he could have one lap.. But I've been to scared to ask so someone please help and make my partners Dream come true!! Im willing to travel to Goldcoast areas, Toowoomba, right through to nambour and sunny coast! SOMEONE PLEASE HELP!

Hey guys, My suspension is just about to die. i would like to upgrade it to something a little more sporty. I don't want anything too stiff it is my daily. So far i have found two kits that say they fit. anyone have any experience with either of these kits. Tanabe - NF Kit Coilover http://www.jdmconcept.com.au/part/tanabe/nf-kit-coilover/stagea-nm35-vq25det BC Racing Coilover Suspension Kit http://justjap.com/index.php/manufacturers/bc-racing/bc-racing-coilover-suspension-kit-nissan-stagea-nm35-awd.html Also quite inexperienced with suspension. any help would be greatly appreciated.

I was just wondering if you guys can check this car out , and tell me what you think about it http://www.gumtree.com.au/s-ad/bendigo-3550/cars-vans-utes/1993-nissan-skyline-r33-p-plate-legal/1028384573

Hi, I can't seem to upload to my gallery.. I can get through the steps to the end but when I try to Finish I get the follwoing message: [#1-gallery-review-key1] Sorry, but you do not have permission to use this feature. If you are not logged in, you may do so using the form below if available. Am I doing something wrong?? I have Albums and pics from ages ago, so i guess I should have permission. Thanks for any help.

Driving a S1 RSfour c34 and looking to increase boost. bought a gauge,boost controller, BOV. havnt yet installed them since im trying to find time to do it and havnt tested boost pressure yet but does anyone have any tips for how much of an increase i should set without stuffing the engine too much. would like to hear your thoughts and advice and if there are any threads that have a DIY? No other engine mods have been installed either. these are the parts i have; BOV - http://www.ebay.com.au/itm/370601350609?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649#ht_1037wt_1037 Controller - http://www.ebay.com.au/itm/220656946480?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649#ht_500wt_1054 Gauge -http://www.ebay.com.au/itm/150790984556?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 :thumbsup: :thumbsup: :thumbsup: :thumbsup: :thumbsup:

Warm idle issue - Help Hey all, Need a bit of help. Been having this issue for a while, It starts having idle issues when the car is warm, usually after about 15-20 minutes, I have got videos of what it sounds like when cold idle and when the issue starts to happen. As well as NDSI logs of as the car heats up and the when the issue happens. It was at protek automotive for about a month and they didnt find anything. I replaced the coil packs with new ones it kept happening, then i replaced the spark plugs with new BCPR6E-1, then also resoldered the AFM solder joints. Any insight would be more than welcome. What the exhaust sounds like cold. Issue as it starts to happen and get warm. Issue as it gets worse. What it sounds like from the drive side fender. I really hope someone can find what the issue is, I'm getting pretty sick of this not working. Thank you all so very much. NDSI20170420_162105.log

R33 Clutch master replacement tomorrow, pls help Hey guys! I'm not sure if this is the correct place to post but i need help. See the thing is i need a clutch master cylinder and install tomorrow D: if anyone is willing to help it would be greatly appreciated! i'm don't know who to ask or where to go for advice. obviously i'm willing to pay for labor and parts. The car is a r33 s1 if that helps and i'm located in Werrington, Sydney

NM35 Factory Boost Gauge - dodgy readings Hi all, When I bought my 250t RS Four the boost gauge was showing some dodgy readings then packed in. After thinking it might be the well known dry joint issue, I dived in to the engine bay and discovered the vacuum hose had split and fallen off the plenum. Easy fix with some new hose and a zip tie, and all was well again. Fast forward a couple of weeks and I developed a new problem, whereby the boost gauge would show 0 at idle, i.e. pulling no vacuum, building up to 1 under partial throttle. Then obviously it tops out so useless on boost. This evening I tried the 'Scotty Fix' and wielded my soldering iron over the boost gauge sensor. I removed the old solder and renewed the joints on all three known failure points. I redid two I wasn't happy with, and confident that my soldering was now good I popped it back on the car and... it's still showing 0 at idle. So either my engine pulls no vacuum, which I will test with my new mechanical gauge tomorrow (unlikely), or something is amiss electronically (likely). Has anyone come across a similar issue before? Could it be an issue with the gauge unit? Or should I try to find a replacement sensor? Are there any cheaper alternatives? These units are crazy expensive and difficult to get hold of. Thanks in advance, John

Help with blown heater hose S2 G'day, I have a blown heater hose on my S2 rs4s. It's holed where the hose meets the hose tail at the back of the block on the intake side, I think it is the return from the heater core? Looking at it I assume I have to pull the intake manifold to replace it. Is there any way I can bodge it up to keep it on the road till the Xmas holidays, assuming just blocking the line to the heater core would be pointless as the return will leak regardless in a pressurised system? Also is there a decent guide on intake manifold remove/replace I can only seem to find guides on aftermarket plenum installs, can't take enough time off atm to mess around with it. Thanks

Help / Advice required about Stagea seats I reclined the driver seat in my Autech Axis 2001 Stagea on the weekend and it won't go back up, (already tried contact cleaner on switches and no luck), so at the moment my car is un-driveable and I need some help / advice, is there anyway to disengage a motor and wind the seat back up manually or does anyone know of anyone wrecking a stagea who would have a driver seat for sale. Also real noob question, is the Autech Axis a m35 or nm35 (i thought m35 but one of the wreckers i spoke to said he thought it was nm35)

M35 Turbo issues Hi guys, last night driving along and turbo working fine, turned the car off turned on this morning and the turbo isn't working at all, sitting on the freeway, I dropped it into 4th and the turbo spoiled out of nowhere, then stopped again. Now hasn't been working all day. I have checked that the actuator is still able to move and the original boost gauge isn't climbing over 0. Any gods on here that can provide assistance?!?

Okay so i made a mistake to remove my srs airbag off my car, and i dont want to put back my old one (really bad condition) i drive a R34 skyline (1998) which comes with a airbag which i believe is illegal, if i act dumb and try to say this car came without a airbag, how much would the fine be if i get caught? kinda dont want to throw away my genuine momo wheel i just bought thanks alot

Amp & Sub have no idea Hi guys , I know nothing about car audio and want to buy my son a subwoofer, he had this kicker 400.4 amp and wanting to know if this pioneer sub is Compatible. Thanks ken 12 inch subwoofer 1300 watts max music power Sealed carpeted enclosure 350 watts RMS at 4 ohm Custom grille

Hi all, So basically my Series 1 C34 stag was stolen and I was lucky enough to get it back! When I got it back I noticed my Xanavi system won't turn on at all BUT my climate control is working and seems to be permanently stuck on auto (my xanavi system houses my climate control so there's no way to turn it off without getting the xanavi to turn on). Before I go spend some cash on an auto elec to diagnose/ fix, just wondering if anyone's had this issue before or would have an idea of what my problem could be so I could have a more educated look myself? Would the thief unplug something when stealing the car? unlucky timing with fuses? Extra info; Cigarette/ 12v power still works my gearshift lights (P R N D 2 1) turn on from time to time but very occasional - worked perfectly before the light for my "power/ snow" switch still works when in power mode when I got it back my centre console was popped open (assuming it was done when stealing) Any help would be appreciated, Cheers, Nick.

Just need someone or few people to give me a hand to convert my r34 sedan auto to manual All parts supplied Can $$ for work

Hi Guys, I need to buy a rb25 turbo in decent condition & I also need a Driver side front guard liner.

Hey guys trying to get some advice for where to go with problem solving on my stagea, its one of the dreaded 08/97 built cars that have an ecu they ran for only one month apparently. pretty much the problem is the car is idle hunting badly running rich and rarely but sometimes stalling at idle and then under power it will stutter and cut out untill i clutch out taking load off. The previous owner had it manual swapped from an auto and the issues started from there as i found from the mechanic who serviced it. if someone could help with a pin out sheet or advice on which ecu to go with or if theres. Something i should replace i would much appreciate it.

Any suggestions for the audio deck, dash clock and like half my air con just completely cutting out? Checked my fuses and they’re all good, also to mention I was putting my cover back in for my trunk and I have wires for a sub back there just no sub yet. Not sure if the wires back there have something to do with it but I literally had music playing one second and the next the clock and deck went black. It’s also for an 2001 rs4s

Does anyone know what fan pulley brackets fit in a M35 Stagea? I found ones for a 350z which looks identical to the mine that needs replacing, but apparently they don't fit. If someone knows for sure what fits that would be great as I am eager to drive it

Hi, I've got a problem that's getting on my nerves. Fuse at the bortom left side (10a) keeps on popping when i turn the key to on. I got problems with my climate control and fan blower and i have tried everything. Googled like a maniac and still can't find anything that sort my problem. Can this be related? I got three climate controls, so that isn't the problem ? I also tried removing all connectors to the fan blower motor, I've changed the temperature relay to. Please help, I'm getting desperate.

I am picking apart my r33 gtst and i just found this loose cable, anyone know what it is?

Hey just wondering if anyone can help me out with some Info ! So I want to replace my 99 Gloria gearbox from the cvt gearbox to a normal Auto gearbox what gearbox will fit and would I need to change the ecu and other stuff ? ? any help appreciated thanx