Search the Community

Hi All, I'm chasing a set of 6 fuel injectors for my R34 RB25DET NEO. Prefer a brand new set that you may no longer need! Standard 14mm rail - 3/4 length. Would like to retain the stock wiring loom - so if you have wiring adapters for bosch/ID/Siemens, great! Oh, and I'm chasing the 250-300rwkw mark (still undecided).

Hi. Am looking for a Power fc with hand controller Electronic boost controller High flow r34 turbo Fuel pump 700+ cc injectors Z32 air flow meter Located in Perth. Send me pics and prices

Just looking for some (Prefably 550cc nismo) 500cc+ injectors. Anyone got anything?

R32GTS-t bits needed R32GTS-t Reversing light LHS next to number plate, also require RB20DET stock FPR and stock injectors. Let me know what you've got Mike.

Stagea C34/M35 Parts & Viper Alarm Hi all, I used to own a 1997 C34 auto Nissan Stagea and a 2002 NM35 auto Nissan Stagea and have some spare parts lying around and would like to sell them. I have uploaded some pictures and can send more via email or sms. 1 x Viper alarm system 5806V with GPS tracking and remote start with additional tilt and audio sensors - Brand New - $850 1 x C34 stock exhaust (I think I have turbo back) - $100 1 x C34 stock wheel - $50 1 x C34 auto series 1 viscous LSD - $300 1 x C34 fuel tank with no fuel pump - $50 1 x C34 auto series 1 prop shaft (requires reconditioning) - $50 1 x R32 GTR Nismo fuel pump - used and in good condition - $220 1 x RB25DET JJR blue silicone heater hose set (missing 2 pieces) New - $80 1 x RB25DET valley cover (please note the snorkel pictured has been sold) - $20 3 x Camber correction Superpro and Whiteline Bushes (SPF3154K, SPF1869K & KCA347) - New - $300 for the lot or $120 each 6 x RB26DETT stock pistons and rods. I may have RB25 and/or also RB30 pistons and rods. $50 for the lot. 1 x M35 Stock ECU - $150 1 x M35 HKS SLD to remove 180km/hr speed cut (NEW) - $350 6 x M35 stock injectors - $50 1 x M35 stock intercooler and fan - $50 1 x M35 stock turbo actuator - $50 That's all I can think of now. If you have any questions please feel free to pm me. I'm located at Derrimut, Victoria. I am also happy to post at buyer's expense. Cheers, Kandio

WTB RB20 Red Top injectors Looking for some good condition rb20 injectors in Sydney preferably Thanks

R35 GTR standard injectors Hi guys chasing a set of the stock injectors from an r35 gtr for a little e85 project. Pm me please. Sydney preferred.

Hi All, Looking to buy a spare set of s1 r33 25det injectors - the purple ones that are all faded and actually look grey. Will need posted if not in Melbourne's northern / western suburbs. Thanks!

Hi guys. WTB a set of 550cc or larger side feed injectors for my s1 r33 gtst. They must be genuine and fit the stock fuel rail. Located in SE Melbourne. I also have a set of 850cc modified bosch top feed injectors for swap. Thank you.

Hi all, I have an auto r34 GTT running on 98 and am thinking about getting my turbo highflowed by hypergear. Just wondering what injectors would suit this application without being overkill and what fuel pump as well. Also here's a list of the current mods, anything that should be changed/added ? Blitz return flow fmic 3" turbo back exhaust with de cat Trans cooler Split fire coil pack Ngk irridium plugs gapped at 1.1 (think I need to decrease the gap, yeah?) Greddy B spec II ebs Z32 afm Apexi pod Nistune Will also be getting a metal induction pipe Any help would be greatly appreciated

Hello All, I'm relatively new here but I've been looking around and can't find an answer to my question. I have a 1996 Series 2 R33 GTS25T i got a KKR 480 turbo from a buddy for less than $180 brand new; (He totaled his car needed money to get a new one, that's the reason for being cheap) anyways; I'm curious if when i do swap the turbos will i need to do anything as far as injectors go? I'm putting in new spark plugs this weekend. I have all the supporting turbo mods ~3" catback exhaust ~Blitz FMIC ~HKS cold air intake ~Greddy BOV Right now i'm running stock RB25 injectors and coilpacks. I plan on upgrading these but at the moment i'm saving my money for a proper Garrett or Turbonetics turbo. I'm also aware that i should upgrade these before i purchase the new big turbo but i'm just wondering if i can run this small KKR480 off the stock injection and ignition system. Any help is appreciated. Cheers!

Hey all, I was wondering if anyone would be able to help me out, I have installed bigger injectors over my stock injectors because most of them were leaking in some form or another into my 93 r32 Gtr, this part was fairly easy. I have installed a nistune ecu into my car as well and intended on just using the 'resize injectors' operation, I did this and initially left all 3 adjust options ticked and then simply uploaded and burned to the eprom. The car then wouldnt start firing. I have only just began using nistune and the software and I was wondering if have done something wrong, if I am only changing the injector size do I tick those 'adjust' options or untick them? I did restore the ecu to the default rom that comes with nistune and it started firing, so my adjustment be wrong with the resizing operation. Anyone know how to fix this or the procedure to resize injectors for a r32 gtr?

my goal is to break 500whp yet still be a weekend driver What i have greedy FMIC Apexi power intake kit Tein coilovers and dampener kit 52mill radiator Parts list. Q45 Airflow meter $100-150 Plenum , fuel rail, throttle body $1000 (for engine clean up only minimal performance increase) Walbro 400LPH $200 ECU I have a haltech platinum Pro ecu kit, let me know if I should upgrade this to make 500hp (370rwkw) Injectors 1000cc $1000-$1100 Carbon clutch twin plate with flywheel $2500 (for $300-500 more but can handle upto 800 hp, if anyone gets a gtt to 800 please fill out your will) Camsharft poncam type b $700 Cam pullys $350 And the big one GT35R turbo kit $4200 Whiteline sway bars $700 any tips or advice or different products i should buy?

Okay so ive got an issue with putting these injector inserts into my freddy plenum and need help with what to do, basically the rubber seal is too big to fit (i did use bosch rubber grease to try and get them in)but the actual inserts themselves fit perfectly! What other options would i have to seal the inserts, i was thinking of using rvt gasket maker but am unsure if this will be okay?

Hey everyone, I bought an r33 recently with the owner saying it had basic mods (fmic, pod, and 3" exhaust only mentioned, mbc). However I was surprised to find that it also had splitfire coilpacks with fairly new splitfire spark plugs (tp392c). Had a quick look at the injectors and did some research but haven't encountered any mention of these around. I don't think they are stock though, they are an army green colour. Can anyone provide me with some info if possible? I'm assuming there would be a serial number of some sort if I take them out, but it would be good to know of anything else before I do. Thanks

Massive Aftermarket Skyline parts clearout - parts to suit 32, 33 and 34. Some big ticket items going for a song! Location: Ipswich, Qld Contact: PM or phone 0413 863 207 Payment: Cash or postal money order ONLY. Strictly no paypal or bank transfer - don't ask! Condition: All parts as described or money happily refunded. Will post smaller items at buyer's expense Pics in link: http://www.skylinesaustralia.com/forums/topic/431133-aftermarket-skyline-parts-good-bits-to-suit-most-models/ Genuine RIPS RB25 intake plenum with Nissan throttle body. $750 NPC big mouth clutch suit RB25. 90% in mint condition with pressure plate and flywheel $450 Genuine Nismo strut brace with brake stopper. Polished with stainless nuts etc. $200 Surge tank set up with pumps and lines. 1.5 litre tank, Bosch 580 lift and Bosch 044 external with lines filters and lift pump mounted in 33 cradle. $355 Siemens 750cc injectors and Sard fuel rail. $600 HKS fuel rail and mounting kit. Brand new. $400 ID 1000cc pencil injectors and loom. $600 Siemens 550cc injectors. $450 Sard fuel pressure reg. With fuel pressure gauge $150 Stainless t3 manifold brace welded. In excellent condition $145 Tial blow off valve as new with vband $75 Power spirit cam gears. Unmarked as new. $150 R33 s1 split fire coilpacks x2 – loom not included. $300. Loom extra $75 PWR large alloy radiator suit R33 some bent fins but in excellent working condition, less than half new price– $400 R33 Aftermarket alloy radiator. $150 Just jap R33 GTR Intercooler 100mm. $150 SOLD pending payment Auto meter oil gauge. $75 Auto meter boost gauges x2. $75 each Saas boost gauge. $50 Turbo timers, various. $50each Catch cans x 2. $40 each Custom stainless Garrett 35R heat shield with extended drop side to protect R33 factory wiring. $150 RB26 cover set – rocker covers, timing case cover and valley cover. Rocker covers with -12 weld-on fittings. Stripped ready for paint. $300

never used still in plastic comes with plugs. $500 located on the sunny coast contact me on 0421314199

rb 20parts r32 parts all part gtr bonnet alloy in primer ready for paint $550 550cc denso injector brand new with plugs still in plastic $550 hiflow rb25 s2 turbo $700 dual core radiator with twin termo fans alloy never used brand new custom made to fit r32 $350 4 x brand new fedral 595s still have sticker 200 each 17 225/45 walbro 255lph f pump less then 100 ks old $250 rb20det with 5 speed and hd clutch and loom $2000 130,000 genuine kms still in car runs fine car is still regoed intire car wrecking r32 gtst 2 dr heaps of parts just ask out at work till the 8th but can get my bro to organis pickups email is best bet jgamble1 @ live . com or text iphone at 0 4 2 1 3 1 4 1 9 9 will try reply within 24hrs currently in the middle of australia working will swap for s15 sr20det parts

Hey all. ive wasted over $300 on cleaning injectors only to find out that one or two end up leaking from the plastic bit that seasl onto the steel part of the injector.where is the best place to buy new other than nissan as i dont want to muck around with second hand injectors that are over 20 years old.cheers...

FOR SALE: 6x Nismo 600cc Injectors (Purple) - $600 the set Apexi PowerFC with Hand controller (L-Jetro), suits R32-33 GTR - $900 Greddy Profec B Spec II Electronic Boost Controller (Manual included) - $300 Or take the lot for $1600 All items are used but in very good condition with low kms. Taking out of the car as going for a bigger build. Items currently located in Osborne Park at the workshop. PM me and I will give you the workshop details to contact if you would like to verify the quality of the parts.

Got a set of brand new HKS 700CC injectors for R35 GTR. Great upgrade new in the box, never used. Asking $1150. Located at Mortdale 2223 Can ship anywhere at buyers expanse. 0449 292 986.

just spent 200 bucks servicing my injectors about 3 weeks ago and the fuel smell went away.now im smelling fuel again and i think i seen fuel slightly leaking from my no 2 injector and also no 3 just under where the red plastic part joins onto the steel injector body.is this a common thing,,,i installed new seals,,starting to loose my patience.any advice appreciated...cheers all

I'm starting to put plans together to up the power in my R33 gtst. It has/will have a bunch or normal mods - bigger turbo, FMIC, boost controller, full exhaust, nismo fuel pump, Power FC etc. The thing Im unsure about is that of fuel injectors. I had planned to go Nismo 555 as a step up from standard. I'm not planning to chase high power with my car, I'm just planning to make the most of my mods and get it tuned so its comfortable and reliable as my daily, but still has the power that these mods allow. That said, I'm wondering what life would be like getting the next size up injectors; 740s? What's the difference in Nismo 555 vs 740? For standard fitment, are they side or top feed? and Is a fuel pressure regulator something I would need in my modifications too, or is it unnecessary?

R32 GTR Gearbox and transfer case $700 ono (I have a second gearbox that will be available soon) R32 GTR sump with front diff, oil pickup and baffles $350 ono R32 GTR standard computer $100 ono GTR Injectors 740cc Sard with standard rail $600 ono Standard GTR intercooler $100 Standard GTR coil packs $150 Standard RB26 oil pump $100 Standard RB26 valve springs $50 Please message me for contact details and any further information and I will reply as soon as possible... Regards Michael

Anyone use this with E85? Lucas upper cylinder lubricant, NOT Lucas Safeguard "Apparently" it aids in lubricating injectors and fuel pumps, I've seen simular stuff advertised specifically for E85, VP racing M2, which (again) "apparently" is the same stuff as this or the safeguard (safeguard isn't compatible with diesel though). Anyone use this with 98? Anyone use this with diesel? I used it years ago in a old Torana I had, as no leaded fuel was available, seemed to work just fine, I think it was 2ml per 1ltr of fuel. It also "apparently" boosts octane, by how much?????? 0.0001 RON, but, it at least doesn't knock it down, "apparently". Why am I asking, a mate was having issues with his fuel pump, "apparently" the E85 he was using ate it, from there we started talking about fuel injectors and the requirement or advantage to lubricant the plunger, yada yada yada, just add beer..... This post has been brought to you today by curiosity and the word "apparently".