Search the Community

WTB - STEEL COOLANT PIPE, WATER PUMP, CRANK, CAMS AND CLUTCH Hi fellas, Trying to source the following parts for a RB26 (1995 R33 GTR): Steel coolant bypass pipe that screws into the side of the block (See photos) Water pump (See photos) Crank Poncams or Procams with assembly (Valves, etc) - preferably 270 degree Pull type clutch good for 450 hp (new or used)

RB25Det BOV return pipe (the Black one that connects back to the intake pipe) WTB - RB25Det BOV return pipe (the Black one that connects back to the intake pipe) in melbourne, keen, money ready let me know guys Ash

Hello all, Sorry to tread through old ground.... would like to get this done. Anyone know who still does it? Or anyone want to sell as with everyone going to big singles there must be some lying around Thanks Lincoln.

I am wanting to buy a 3inch 5 bolt dump pipe for my GT3076 turbo, preferably a split dump where the wastegate gasses meet the pipe further down. Alternatively If someone is able to fabricate one please let me know as well Car: R33 GTS-T Location: Melbourne SE

Hey guys, I'm going to be replacing the turbo on my RB25, and was wondering if I could use the stock intake pipe even though the new turbo has a 3in inlet? It's my understanding that the stock turbo's inlet is 2.5in, yeah? I was thinking of using a 3" > 2.5" coupler directly on the turbo, then using a small piece of 2.5" s/steel pipe to connect that coupler to the stock intake pipe. Thoughts? Before anyone says it, I know I should just replace the intake with a 3" intake, especially if said intake was metal. However, I'm working to a VERY strict budget and just need to know if this will work (until I can afford to do it properly) and if there would be any issues. Thanks in advance.

Got a few skyline parts to get rid of. r33 rb25det engine mounts r33 standard dump pipe (from turbo to cat. inc cat) x2 r32gtst rb20det crossover (intake) pipe, x2 vl rb30e series 2 block, crank, girdle. $70 EOI: rb25det S2 short motor.vgc. 80,xxx km's, no rust in gallerys very clean, motor not blown but would recommend throwing in new bearings and rings since it has been sitting without a head and has had main and big end caps off and back on to check condition at some stage since i've owned it. taking offers until i decide if it's staying. located on the northside of brisbane. Call or text 0433 559 722

Hey guys. Few things for sale. First up Set of wheels, come off the car tomorrow so here are some pics to give you an idea before they're removed and cleaned for better pictures. Type; Weds Kranze LXZ Sizes; 19x8 +26 20x9 +29 Running 245x35 Federal 595's on the front, probably about 5 thousand kms. At least 80% tread. Running 275x30 Federal 595 evo's on the back, same time and tread as the front. Little bit of rash on the wheels, more pictures to come of that. Otherwise good nick Chasing $2.5k ono. Happy to post at buyers expense. Next is a set of stainless Cat delete Straight pipes to suit v35 coupe. Sound great, just went with hfc's for pits etc. $200 ono happy to post at buyers expense Located in Perth Western Australia And all photo credits to Kuruma Photography and Epidemik Perth Cheers Kohbz

Where can I get a Steel Induction/suction/intake pipe? [RB25DET] I've googled and googled, I can't find a metal induction pipe that will go from my factory MAF to factory turbo. It's for my R34 GTT RB25DET Neo, and I'm going to get my factory turbo highflowed by Hypergear. They recommend to run a 3" steel induction pipe to the turbo. I have a silicone one right now and I think it's collapsing when I hit 1.3bar with my factory turbz. So I've searched every where and theres nothing out there. Can someone please link me to a site or someone that might sell one. Or does one usually weld one up? I'm also thinking of getting a Z32 in the future so will have to fit that too if possible

hey guys selling more stuff. heres the list R34 GTR Stock AFM - $300 Twin Turbo pipe - $150 R34 GTR Stock Injectors - $200 R34 GTR Air box - $300 Reasonable offers may be considered call or txt 0409076032 kane Also coming soon *Fujitsubo legalise r cat back*

For sale are some Genuine R33 RB25DET parts that came off my Series 2. Instrument Cluster with 146k, all working fine except the Tachometer doesnt like telling the RPM all the time, sometimes jupms around, not sure the problem but it works sometimes. could be a easy fix. $60 ono. RB25DET Wastegate actuator, Good condition works perfectly fine. $35 ono. R33 Series 2 / R34 GTR coil packs, great condition near new with no spark blowout at high rpm, Genuine Nissan. $220 ono. R33 RB25DET standard blow off valve / BOV, awesome condition works fine. $30 ono. R33 RB25DET stock dump and front pipe, has surface rust no leaks/ holes/ cracks etc great condition. $30 ono. R33 RB25 Slave cylinder, great condition holds pressure works fine,no leaks. $25 ono. R33 RB25 Clutch Master Cylinder, awesome Condition, Had reco on it when was on my car. works great holds pressure no leaks $50 ono. R33 Rb25 Thermostat, Works great pluger and spring work great, no faults. $25 ono. Located in Brisbane Northside, can be picked up at either Warner or my workshop at Virginia. can post smaller items at buyers expense (obviously). Im open to offers pm me for any more details. inspections welcomed if wanting to have a look at parts. Attached Thumbnails

for r33. taking them off on saturday as going back to stock airbox. used for less than 1000ks. brilliant condition. intake pipe has two breathers for recirc and oil breather. is painted black for stealthy ninja look. paint stripper will cure this, to expose rainbow lobster piping. filter is brand fecking new. still have the box. located south east melbourne. text only 0423874575. oh also comes with a bracket and adapter for afm. intake $120 hks filter $50 adpater plate and bracket $20? all up 150. can post at buyers cost. will have pictures on saturday. still on car being used.

Stock turbos and dump pipes from 1990 R32 GTR RB26DETT. Good condition, minimal shaft play on both turbos, always run with restrictor in (10psi). Receipts from when they were serviced in 2006. // $300 Dump pipes are in good condition, includes heat shields. // $150 Turbos and dumps together. // $400 Reason for sale: Upgraded stock twins/dumps/exhaust Located Quakers Hill, NSW.

Garrett T51R - 6Boost Manifold - Turbosmart 60mm Wastegate with Screamer Pipe Hey guys, selling the following setup out of a GTR. - Garrett T51R with 1.15 rear housing. The turbo is in near new condition no shaft play or leaks of any sort. The front compresser housing has a 90 degree elbow welded on it and also polished chrome. I have welded a 3.5 inch v-band to the exhaust outlet which is still new it comes with clamp and second flange for dump. - 6Boost Manifold - 60mm Turbosmart Wastegate with Screamer Pipe $2800 ono - Vik. SMS: 0466 605 513

Hello Everybody just have a few parts lying in my garage which I wanna get rid off Located South Eastern Suburbs in Melbourne Here are the items: *Xforce Split dumps $300 New and unused *Greddy/Trust Intercooler Hard Piping Kit $350 bought this off an SAU member but stock piping is suitable for my needs so i don't need these anymore - great condition *Stock R32 GTR ECU $100 My cars a 93 VSPEC so im not sure if the ECU's were different to other R32 GTR's etc. Working perfectly but I have PowerFC now so no longer need this. *Stock Yellow Top 440cc RB26dett injectors $200 I've upgraded my injectors so no longer need these, removed by Racepace and worked perfectly, O rings etc are all in excellent condition *Blitz Sus Pod filter kit $100 These are pretty cool but i've always liked Apexi so i switched - good condition but could do with a bit of a clean Pick up is welcome else I work in the city so can also meet up if required. Happy to post at buyers expense. I don't come on here very often so if you like anything you see send me an SMS on 0400 370 477 prices are pretty resonable (i hope) but ono is cool. Thanks for looking Dennis

Got a bunch of items for sale From 34 GTR and 92 model R32 GTR Prices are negotiable or if you believe i have over priced or made any mistakes let me know , got plenty of pics of each item so PM me or message on 0422244946 for more pics or info. All items are in perfect working condition. TE37 Tokyo time attack 19*10.5+15 with 285/30/19 Pzero's and bridgestones in poor condition. Rims fit perfectly on R34 Gtr flush with the guards, bought brand new about 8 months ago had to wait 3 months for them to arrive still in near perfect condition, only traveled about 5,000 KM on them, i removed them from car couple months back, didn't like the ride of 19's. Asking $3500 ONO R34 GTR glove box $75 R34 GTR center console $75 Standard R34 GTR turbos $ 400 Standard R34 GTR rear arms $20 R32 GTR push type gearbox including drive shaft, transmission mount and cross member sandwich plate and clutch slave cylinder. $750 Standard R32 GTR AFM's $150 R32 GTR standard computer $200 R32 GTR BOV + pipe $150 R32 GTR pipe from turbo to afm $25 R32 GTR twin turbo pipe $150 R32 GTR standard plum back BOV setup $150 R32 GTR brake master cylinder $75 R32 GTR clutch master cylinder $75 R32 GTR radiator lines $20 R32 GTR radiator support's $20 R32 GTR power steering reservoir $75 R32 GTR standard boost controller $20 Exhaust silencer, came from R32 GTR $50 2* 800w 12inch pioneer Subs in ported box, abit rough around edges $150 1200w audio-line amp $75 Greddy Turbo timer (never used) $75 2* New apexi pods (never used) $100 Also have Beats headphones never used $120 Next few items im not sure on price or names haha, May consider keeping but throw me an offer R32 GTR Cowl vent panel? Dont know name of this item, for rear window R32 GTR boot rubber, And Bonnet rubber?? Thanks for looking guys, again prices are negotiable, however this stuff has been laying around for over a year im in no rush to sell. Contact me on 0422244946 for any more pics or info. Thanks

Have this to sell in Runcorn South Brisbane.I can post it or dropoff locally Asking $100

I bought both these items recently and only selling as I don't like the brutal sound from the screamer pipe and I replaced the 100 cell cat with a straight through pipe. $100 ono for the screamer $120 ono for the 100 cell cat These bolt straight onto your s1 or s2 R33 or R34 Gtt or anything with a RB25DET Located in Geelong, postage is $20 per item anywhere in AUS. PM me for enquiries Photos are of them brand new, they have been used so expect some slight colour distortion, otherwise theres no scratches or cracks breaks etc. Screamer pipe used once - took it around the block and hated the sound (not my thing) Cat has been in car for around 1000kms. Cheers - Dan.