Search the Community

Wrecked R34 GTT HTA3076 twin scroll rebuilt gearbox E85 fuel setup R34 GTT wreck Car has a lot of great parts on it with very low klms HTA3076 with Sinco twin scroll manifold and two turbosmart external gates along with screamer pipes and dump - fitted may 2016 (Amazing turbo, Total cost $5000+ Had to buy the turbo then get the twin scroll housing separately from GCG then get screamer pipes and dump made up) rebuilt rb25 gearbox (have receipt for $3800 from last year - very low klms) Big fuel set up - ID1600cc injectors, 1000hp external fuel pump, surge tank - all suited for E85 (Injectors were $1200 by themselves) power fc ARP head stud kit, Nitto head gasket, Tomei type B cams, performance valve spings - fitted august 2016 Greddy radiator Wilwood big front brakes (I believe around 350mm? - require an 18" wheel minimum) RB25 Neo internally standard Those are the parts I can think of right now. My preference is to sell the whole car as is. This is due to the fact that I fractured my humerus in the crash, otherwise I would part it out. If I cannot sell it whole, I will store the car for a while until my arm gets better and take all the parts off and sell them separately. Asking $8000 which I think is a pretty good deal when you consider just the cost of the turbo kit and gearbox were actually higher than this by themselves.

Hi all, Up for sale is my single turbo conversion kit for rbs. This kit is a 400rwkw+ kit and would push closer to 440-450 with an optimised set up. Im selling due to having the opportunity to buy a complete EFR 83/74 set up from a friend. Here is a link of the car on the dyno with the old set up and baby cams. The kit hasn't done a lot of work as not long after the kit was installed, the engine dropped a valve and I began work on building a 2.9. Results here http://www.sau.com.au/forums/topic/414766-gtr-joeys-r32-gtr-e-flex-twinscroll-8375-results/?page=1 Video at bottom of page http://www.sau.com.au/forums/topic/414766-gtr-joeys-r32-gtr-e-flex-twinscroll-8375-results/?page=3 The kit consists of a -Full race twin scroll manifold (ceramic coated) suit RB 26/25/20. This manifold is a complete work of art. http://www.full-race.com/store/turbo-manifolds/nissan-rb20-25-26det-t-twinscroll-turbo-manifold.html -Borg-Warner S300SX 83/75 turbo T4 twin scroll 0.91 A/R with turbine ceramic coated and 3 inch V-Band http://www.full-race.com/store/turbos/borgwarner-airwerks/borgwarner-s300sx-83-75-turbo.html -2x Tial MVS 38mm waste gates w/water cooling option and V band http://www.full-race.com/store/wastegates/tial-mv-s-38mm-wastegate.html -S/Steel Ceramic coated dump pipe, 4 inches all the way to the Cat -S/steel ceramic coated waste gate pipes plumbed into the dump -K&N pod filter w clamps and silicon join -piping from turbo to cooler with clamps and joiners -Oil feed and return for turbo -fabricated power steering reservoir Manifold, turbo and gates are worth over $4500aud to buy brand new from the U.S. And that's before you pay postage and 10% goods tax. The welding on the dump pipe and plumbing for the gates are excellent and are worth over $2500 in itself. That's without the ceramic coating. The kit is currently still on the car with a run in tune on 98 making 360rwkw on 17psi. If your a serious buyer and you have the cash I am more than happy to show you what the kit can do before I remove it. If I think your a test pilot you will be asked to remove yourself. Price: 6k for the lot. Not wanting to separate the kit, may consider selling the turbo by itself if I have a buyer for the rest of the kit. Contact via PM at this stage until I'm back in the country next week. Located Sydney Cheers

Hey everyone, Decided to go a different way with my car and stay lowmount so im selling off some of the parts I have bought along the way. Selling as a combo deal for the meantime. Up first is a 6Boost T3 Twin Scroll highmount manifold for a RB25, its still brand new in the bubble wrap and has been ceramic coated Has 50mm ext gate port with a v band flange welded on, also comes with a full new set of head studs to replace your old ones and a Flange to suit. This cost over $1300 to have made pics Second Item is a Brand New Turbosmart Pro Gate 50mm with a 7psi inner gate fitted. As you can see its all boxed up and shiney, comes with all v bands (spare one as there is one already on the manifold) clamps bolts and spring. This will cost you anywhere between $600-700. some pics. Price is $1400 for the lot which I think is VERY WELL PRICED considering you are getting 2k worth of brand new stuff! As stated above not will to seperate at this point in time, will update with individual pricing should I decide to go that way. Items are located in Penrith NSW. I can ship but price will vary depending on how you want it shipped and if you want insurance etc. You can contact me via PM for my phone number or if you wish to chat there. Thanks!