Quick Turbo Timer/ Ignition Qn

[Josh_r32]

ok im hard wiring in my turbo timer because i dont have a harness.

just one quich question,

i need to wire it into the ON position on the ignition, the wire i think im about to cut is a black one with a green stripe?

which pic is right, please help!

does it go from left to right: OFF, ACCESSORY, ON, START, SOME RANDOM WIRE

or LOCK, OFF, ACCESSORY< ON, START??

[Josh_r32]

wat one do i cut

black/green

black/yellow

black/white

white/red

blue

HELP!!!! Surely someone knows what colour the ON cable is on a r32 skyline!

I cant read it on the workshop manual because its too small and its a dodgey scan

Edited November 21, 2006 by Josh_r32

[tridentt150v]

Use a multimeter or test light, you can rig up a test light from your interior bulb and a couple of wires with insulation tape. I made one up years ago for setting the auto advance on old motor bikes with points ignition. But really a multimeter is cheap as [under $10], and a test light is like $2-5 at supercheap.

If nobody answers at least your not stuck. Best I can do sorry

[Josh_r32]

Use a multimeter or test light, you can rig up a test light from your interior bulb and a couple of wires with insulation tape. I made one up years ago for setting the auto advance on old motor bikes with points ignition. But really a multimeter is cheap as [under $10], and a test light is like $2-5 at supercheap.

If nobody answers at least your not stuck. Best I can do sorry

thanks mate, might try if no-one knows

[Josh_r32]

bugger it so no one has any idea?

i reckon its either blue or black/white lol