Bolt On Replacement For Rb20 Turbo

[R32 _ULTIMATE_WEAPON]

want to replacement the stock turbo on my rb20det is there a turbo out there that will both on in the factory spot. all the oil water lines line up and so on also if any one knows were i can get it. thanks

[blind_elk]

Gee whiz, how many times has this question been asked?

[gun32gtr]

look in the rb20det turbo upgrade thread in forced induction. you will find your answer right away plus answers to many questions u may for further upgrades.

SEARCH

[R32 _ULTIMATE_WEAPON]

did a SEARCH could not find a thing that said this turbo will bolt right on this one will not and any thing that looked like the answer to my question just says do a search. can any one help me thanks

[Haines]

how would a VG30 turbo off an r34 go on rb20

im trying to offload mine to a mate with an r32

[xRHETTx]

You can put the stock one back on? Is that what you mean?

Or do you want to increase power etc?

[CEF11E]

The T88 is a direct bolt on...

really...

[R32 _ULTIMATE_WEAPON]

increase power want to make about 260hp or 280hp

[xRHETTx]

Sliding performance Rb25 highflow, gcg highflow etc...

[moonus]

mate, just bolt on a turbo off an rb25

[Kaido_RR]

hks gt2510, gt2530, gt2535, gt2540, highflow, rb25 turbo etc etc...

[-_-StRyDeR-_-]

put a GTRS on there.

CJ

[tiesto]

rb25det stock turbo retains the rb20det stock lines and is a direct replacement

with a safc should see around 260hp

[supadan]

to get 260 u would need bigger injectors right, but no need for a full rebuild on the engine

[2rismo]

Grab a cheap engine management unit (go simple like an SAFC if you like), a Sliding performance highflow turbocharger and some 2nd hand gtr injectors. You'll be rapped.

[Sydneykid]

Try the Group Buy

http://www.skylinesaustralia.com/forums/in...howtopic=140636

cheers

[R32 _ULTIMATE_WEAPON]

SAFC sands 4 ????

[limpus]

The T88 is a direct bolt on...

really...

Or a T51SPL...

[gt-t_r34]

SAFC sands 4 ????

air fuel computer, there cheap and ok if your not chasing huge power, or you could get an emange there good because they can be bought plug n play.

tdo5 turbo would also be on your list, depending on how much you want to spend if your tight on cash, you might want to rule out jap turbos and look at hi flows or a r33/r34 turbo.

Edited December 9, 2006 by gt-t_r34

[DOUGMO]

if you go an rb25 turbo just check the size of the water lines as there is 2 different sizes

oil lines should be the same

you will need injectors and tune to get the most out of it