Jump to content
SAU Community

Recommended Posts

I don't know the best thread to post this in...

Has anyone had experience with G-Tech Performance Meters?

They plug into your cigarette lighter, and measures acceleration accurately to tell you things like:

0-100 times

g-forces

and horsepower

Wondering how well they work, and if anyone has one? The idea of being able to measure power without going to the dyno may be handy for making adjustments on my car, and being able to gauge the changes better.

Link to comment
https://www.sau.com.au/forums/topic/148301-g-tech-performance-meter/
Share on other sites

  • 2 weeks later...

I've seen one of the original G-Techs used.

The guy ran a 101rwkW in his CA18DET S13 at Unigroup's dyno, and then when he was going home it measured 99rwkW on one of his street "power runs". So, pretty damned accurate.

ive got a g tech and cant say that ive used the rear wheel hp function yet but when i used the quarter mile function with my old turbo set up i got 111.5 mph on the gtech and 110.5 to 112 mph terminal speeds from the print outs at calder park race way. i used the 0 to 60mph on the street as a guage to how well my car was responding to modifications. so i think that it is an amazing piece of gear!!!!

I used one the other day.I got 5.9 sec to 100km.And a g-force number of 0.57.Not bad for a stockish R33.

On the other hand my mate who owns the G-tech pulled a 5 sec to 100km and a 0.72 on the g-force metre.

But he has a club spec5 wrx with alot more mods.

I am the national importer/distributor for Beltronics, and I have a version called the FX2 Accelerometer...

All of these devices (Beltronics, G-Tech, Pivot, etc) are similar but the difference is in how many times a second the unit measures the G-forces, and how many parameters you can input about the car (weight, drag, roll effect, etc)...

I have used the FX2 in my car and it is registering a average time of 12.7, and although I haven't taken it to the drags yet, I am sure it would post a very similar time (probably a little better with a burn out and race prepaired track).

I think that they are a great way to see if a gain has been made when you change something or upgrade a modification. There is an extra cable you can buy to link it to your computer and with the free downloaded software, you can view upto 10runs with break downs of 60', 120', and 1/4mile with 0-100 and ET... it also shows the HP based on the inputed parameters-Vs-the G-forces. You can clearly see where you make the gear changes and you can also look at the power curve to try and make it as smooth as possible with tuning.

Very neat piece of gear... PM me if you are interested and I can direct you the local dealer or I can arrange something direct.

click here to view the FX2

I am the national importer/distributor for Beltronics, and I have a version called the FX2 Accelerometer...

All of these devices (Beltronics, G-Tech, Pivot, etc) are similar but the difference is in how many times a second the unit measures the G-forces, and how many parameters you can input about the car (weight, drag, roll effect, etc)...

click here to view the FX2

Interesting but the link provides no information about the product?

I have used the G-Tech Competition one, it also allows you to download the run and look at different points on the screen. It even prints out a dyno run page!

It was only a few kw's off my actually dyno pull.

If you take the time to set it up properly with acurate weight etc it's great!

Cheers

Josh

how much are these now.. seen them on ebay a few years ago for like 60..?

still get them off ebay?

I got mine for about $60 a few months ago, and they are still available at about that price. The newer G-Tech Pro SS, which measures heaps more stuff (and looks sooo much cooler :laugh:) goes for about $320 (http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...em=300066211531)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It was roughly 3.5 hours.    car went in around 11:00 and I was done around 2:30 He did the initial runs, install the BC and then Nistune install and tune.  The best part was sitting in the lobby and hearing the skyline on full throttle at the dyno 😂😂
    • Glad it all went smooth. How long did the tuning process take?
    • Yeah that was kind of the same feedback my tuner gave me.  the boost tee is until I can sort out my plan for the electronic boost controller and what I’d get, where I’d mount the dash etc.  I’m happy with this until I can figure it out. Not a big fan of the A-pillar gauges. I’d like to get a clean install of the boost gauge - something digital like GFB.  Something like that might fit neatly where the ashtray is and look clean. I feel like replacing the OEM triple gauge is a bit extreme for a weekender like my skyline. And it’s not making crazy power to need all the additional sensors/gauges. 
    • I'm about to swap my box to Tremec T56 Magnum F & initially thinking of re-using my DCS twin plate (can get it re centred for the bigger spline) but it's been called out the box will be noisy (rattle) as the clutch is unsprung.  So I'm doing as much research as possible. I'm not so worried about holding the power as I'll go the track version which on paper will hold the maybe 1000hp I make. It's the longevity I worry about. DCS told me they don't use a sprung centre as it's just something that can break. The uni clutch has a very complicated sprung centre. Any one had or heard about any issues with it failing? Thanks in advance.
    • Auto is at least 10% (from my real, actual experience with different torque converters and manual on the same setup) ~185rwkw at 11.6psi (peak!) is entirely what one would expect without a FMIC or anything else on the intake, it does bleed off towards the higher RPM so it's what, 9psi there? Note: There is nothing that can be done about this with a manual boost tee. If you want to hold it steady and gain more top end, well - You will need electronic boost control.....
×
×
  • Create New...