Hi People,

I need a favour. I am getting an Error 34 on my R33 and have checked all the wiring as per the service manual. It says that there is supposed to be a 4 pin connector with only two wires running from it to each of the knock sensors.

I have had a quick look at mine and all i can see is a brown wire running from the loom which comes down parallel with the plenum to a red crimp connector and then to the sensor.

Does anyone have a photo of the connector in question and where abouts it is in the engine bay.

This has been causing me grief for many days, and I am eager to get the fault sorted out as I am running on a retarded map until it is fixed.

Thanks in advance

Aidan

the brown cable is actually the outer cover plastic cover for the shielding. You are on the right track. The knock sensor connector looks the same a injector connector and is black. It is diffficult to see by eye, you will need a mirror or be artful with your arms. I usually use the knock sensor retaining bolt as the locator point for my dett headphones so it is accessible just a bitch.

Edited May 1, 200719 yr by URAS