Jump to content
SAU Community

Head Unit Removal


Chris Rogers
 Share

Recommended Posts

Nice guide :( here's the 32:

R32

1. Pull out ashtray like below, undo two screws behind it - My 32 had another 2 screws once you pull out the gear boot and surround.

2. Flathead screwdriver under the rear of the center console, push up, it will pop out

3. Flathead screwdriver under the top half of center console, pops out, remove center console, or turn it around

4. Undo 4 screws, two either side of headunit, pull headunit out

5. Undo cage holding onto headunit, refit to new headunit, finish wiring off and put back in hole

6. Refit going backwards from 4 :)

Link to comment
Share on other sites

  • 2 months later...
  • 1 month later...

Hi Guys

I busted the the volume button on my stezza and its stuck at max vol. I read the explanation for the R33 removal posted by Chris, and it sounds easy enough, but the link to the one with pics seems to be broken. If anyone knows of a new link, or can do something about fixing the old one, It'd be great. Cheers.

Link to comment
Share on other sites

  • 4 weeks later...
OK I used Chris's instructions and a couple of extra things that he told me about so here is a slightly more detailed description with pics.

1 - First pull out the ashtray and undo the screw behind it.

The ashtray just pulls out with no significant force needed. I just pulled on the open lid.

Pic1.jpg

2 - Pull up the gear stick surround and undo the 2 silver screws at the bottom left/right of the storage bin.

This takes a bit more force, I pulled from the back near the handbrake and levered it up with my fingers. I also pulled off the shift knob at this time but you could probably do it with it on but I thought it would be easier with it off. There are 2 screws at the front of the knob, put the shifter right back in low to get easier access. It takes a little bit of maneuvering to get the surround over the front of the shifter indicator and be careful not to scratch the vinyl with the hard edges of the surround. Unplug the lighter, lighter surround light and steering wheel shift switch. All plugs have a release tab, push it in or you will get real cranky trying to get em off.

Pic2.jpg

3 - Using a thin flat blade screwdriver on the left side, prize out the 2 vents at the top of the console and disconnect the unit.

This is the panel that houses the 2 vents and the hazard switch. I used some masking tape around the screwdriver to avoid scratching the vinyl when levering. Unplug the plug at rear.

Pic3.jpg

4 - Undo the 2 silver screws at the top of the heater controls.

Pic4.jpg

5 - Pull out the heater controls, radio & stage bin (all in a cage together).

I put some toweling over the lower console area to avoid scratching the vinyl.

Pic5.jpg

6 - Remove the radio from the cage (2 screws each side) and fit your radio.

I undid a couple of extra screws to "open" up the cage a bit to allow the radio to be removed and the new one installed more easily and without scratching anything.

Mine had the aerial adapter already fitted as there was already an aftermarket deck installed but the previous fitter had butchered the wiring loom so it was a bit more work to re-wire all the wires in a decent manner but if you are removing the stock deck then get the correct plug adapters and aerial adapter available from Chris or some auto outlets. I also bundle any wire slack in some padded tape to avoid any rubbing or rattling later on.

Pic6.jpg

7 - Refit going from step 5 back

I connected everything up and tried all deck functions before re-fitting the cage permanently just in case but luckily for me all went to plan.

Hope this helps, Mark.

thanks for that mark, i was trying to change my head unit but it mysteriously wouldnt come out! ur pics are greatly appreciated

Link to comment
Share on other sites

  • 1 month later...
Hi Guys

I busted the the volume button on my stezza and its stuck at max vol. I read the explanation for the R33 removal posted by Chris, and it sounds easy enough, but the link to the one with pics seems to be broken. If anyone knows of a new link, or can do something about fixing the old one, It'd be great. Cheers.

is this guide for an r34 too?

Link to comment
Share on other sites

  • 7 months later...
  • 1 month later...
  • 1 month later...
  • 3 weeks later...

R33

contact me for pocket,harness and antenna adapter

Don't do this....

After 10 PM's, 2 phone calls, 1 credit card number given and almost 2 months wasted waiting for this guy, I gave up and went to the local audio shop and bought the gear in under 2 minutes...

Take from that what you will.

Link to comment
Share on other sites

  • 2 months later...

Hey mate,

I have to commend you on the guide for the R34 head unit change with the pictures & all. I was about to pay someone to do it for me but once I read your guide I've managed to save myself some dollar. I even joined SAU to show my appreciation, I mean there are a lot of other useful threads here but when I stumbled across your guide that took the cake for me =D

Thanks again buddy & thanks to SAU for being a SUPER AWESOME FORUM. SAU 4 LIFE!!!!! xD

Link to comment
Share on other sites

  • 4 months later...
  • 2 months later...
  • 4 weeks later...

Chris + Mark, thanks a million for your insight and posts. I hate pulling out head units in cars I havent worked on before because things always go awry the first time - but not this time!! :)

no probs.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • I'm trying to maintain stock appearance . Hicas is still installed (although has lockout kit) did you retain factory fuel pump hat? If so I assume you used a bulkhead fitting or similar ?  I was also trying to avoid a full re design as it was previously dynoed at 426kw atw with same setup but different pump. Changing return line would also mean having to change ethanol sensor and fpr and possibly fuel rail. Not chasing more power in any way just reliability of the setup 
    • I do think it's weird I had it for 2 weeks then the issue came up out of nowhere and progressively got worse. I would've imagined changing everything in the ignition system would've resolved any ignition related misfires but still has the high rpm and idle misfires that seem unchanged. I would've thought if it was fuel related it would happen all the time unless it's the pump losing pressure when it gets hot. If it was the ecu I would think it would do it all of the time.  Something I noticed when I had it all apart was a pretty decent coating of oil in the J pipe coming from the throttle body. The weird thing about that is the pcv that goes to the intake is blocked off. So that has me wondering if the oil is coming from the turbo because that's the only thing that could get oil in there. This thing does sound like it spools like a mofo like I'm a former dsm guy and the only stock turbo I've ever heard spool this loud (to only go up to about 5psi) is on a diesel truck. And the recirculated bov is really loud too I had a TurboXS RFL and this thing is just as loud and being so low on psi seems a little weird. I don't know if any of this is or isn't related but just trying to make sure I'm not leaving any potentially helpful information out. 
    • So latest update. I replaced the ignitor with a jspec unit from enjuku. It felt a lot better at first although it is a little bit cooler of a day than it has been. Warming up didn't have as much misfire sputtering as before. Went on a 10m test drive. Felt good, a lot stronger though I was taking it easy on the boost. On the return trip started getting the cutting out at higher rpm again and was getting worse the longer I was driving. Took it easy the rest of the way home. Before turning the car off was getting the normal idle sputtering I was getting before.  So where I'm at now, entire ignition system has been replaced with upgraded components. Plugs still gapped at .8mm. Removed the fuel cap in case it was building too much reverse pressure I'm the tank, didn't help at all. Now I'm still on the same tank of gas the fuel treatment was in, I'm thinking if I can run that out and then refill with fresh 93 maybe  the treatment is too concentrated in some areas but doesn't explain that it only does it once the car is warm. I'm leaning towards fuel pump or injectors but if the injector was clogging I don't think it would make it shut off like it has but then fire right back up like nothing happened. So my current guess would be the pump. Without a fuel pressure guage no way to test or check it while it's running.  So that's kind of where I'm at. Need to start testing fuel components and ecu/wiring but I'm at a loss of what's the next logical step and procedure for testing it. 
    • @niZmO_Man thanks for that info, lucky I bought the gktech ones 🤙.
    • Never cheap out on brakes, tyres, suspension. I learnt the hard way at Oran Park lol
×
×
  • Create New...