Jump to content
SAU Community

Recommended Posts

i've been whoring the search tool on this forum and i still cant work out an answer.

very rarely the engine check light will come on, and when it does the knock sensor on the pfc reads pretty high. last night drove the car on a cruise for like 2.5hrs and knock sensor read 126 once. @ 4600rpm

during the night only saw it ever got to 40 @ one stage.

thing is i havent hear the engine ping inside the cabin.

some of the boys reckon i was shooting flames last night but thats just fuel dumping right when changing gears?

the car tuned @ racepace last year, and recently was retune there last month. b4 and after its pretty much the same, knock goes off rarely.

mods are TB 3" high flow cat, pod, cooler, 12psi, pfc and walbro fuelpump which is only 3 weeks old.

i'm thinking to get some splitfire coils, anyone got any thoughts?

Edited by eddieeeee-ro
Link to comment
https://www.sau.com.au/forums/topic/194037-pfc-knocking/
Share on other sites

if you are not experieicning any pinging, you dont have a plug/coil problem so i woundnt suggest you get splitfires. Knock is really to do with the tune, so your tuner should be able to sort it out for you.

Recieved PM: no probs ;)

Link to comment
https://www.sau.com.au/forums/topic/194037-pfc-knocking/#findComment-3480321
Share on other sites

i was of the belief that since he is not experiencing any detonoation, its merely the pfc knock sensor. ie, something to do with the tune? my bad then

probably is the tune i.e ignition timing advanced too much.

Link to comment
https://www.sau.com.au/forums/topic/194037-pfc-knocking/#findComment-3480363
Share on other sites

i was of the belief that since he is not experiencing any detonoation, its merely the pfc knock sensor. ie, something to do with the tune? my bad then

The knock readings on the PFC may or may not be actual engine knock. Sometimes a noise in the engine bay at whatever frequency the knock sensors are set to pick up will set them off. Regardless, the terms "pinging" and "knocking" are both detonation.

Link to comment
https://www.sau.com.au/forums/topic/194037-pfc-knocking/#findComment-3480371
Share on other sites

i've been whoring the search tool on this forum and i still cant work out an answer.

very rarely the engine check light will come on, and when it does the knock sensor on the pfc reads pretty high. last night drove the car on a cruise for like 2.5hrs and knock sensor read 126 once. @ 4600rpm

during the night only saw it ever got to 40 @ one stage.

thing is i havent hear the engine ping inside the cabin.

some of the boys reckon i was shooting flames last night but thats just fuel dumping right when changing gears?

the car tuned @ racepace last year, and recently was retune there last month. b4 and after its pretty much the same, knock goes off rarely.

mods are TB 3" high flow cat, pod, cooler, 12psi, pfc and walbro fuelpump which is only 3 weeks old.

i'm thinking to get some splitfire coils, anyone got any thoughts?

Just go back to Benno with that info mate.

If you tell him 4600rpm, what gear and roughly what load, it'll be one cell that needs adjusting and it wont take long

Also your more likely to notice the one cell at night, as the air is colder. Mine was similar ages ago.

Hit about 80 on a super cold night only around 6000rpm in 3rd, one/two cells changed and happy days ;)

Link to comment
https://www.sau.com.au/forums/topic/194037-pfc-knocking/#findComment-3480472
Share on other sites

Ive had my car tuned a few times,as mods were added.My car sometimes shows knock of 80 for a split second at high boost and RPM.

Taken the car back a few times to sort it out.But i was told all is normal.Could be a number of things in the engine bay making noise.

I never hear any pinging but i do get a read of 80 at high loads on occasion.

Tuner is very reputable.And works mostly on Nissans.

Link to comment
https://www.sau.com.au/forums/topic/194037-pfc-knocking/#findComment-3481134
Share on other sites

I been having same issue, Due to heat. + more boost. + advanced Timing. from the Manual 120(ish) knock indicates Detonation. In agreement with R21Nizmaid, tuner should be able to fix by adjusting the problem cells.. (which I really gotta get done :S).

Link to comment
https://www.sau.com.au/forums/topic/194037-pfc-knocking/#findComment-3484686
Share on other sites

a power fc reading of 125 is false, if it was correct you would definately hear it even if you didnt know what knock is. The knock sensor has picked something else up and like explained above there are many things that create the "frequency" that the knock sensor is tuned to detect, even rocks/pebbles being flung up into the engine bay can set this off.

If you are driving around with the normal max knock sensor of 40 thats ok. Anything around a true knock reading of 80 or so and knocking or pinging whatever you like to call is audible. You'll know when it pings, its a very distint noise.

To make yourself sleep a bit easier, stick it on the dyno and get a pull done just to double check afr's and knock levels

cheers

Link to comment
https://www.sau.com.au/forums/topic/194037-pfc-knocking/#findComment-3484834
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...