Jump to content
SAU Community

Recommended Posts

But you have to have some muscles on you before you can cut down to it.

quickest way to gain muscles?

eat lots of food and do compound movements with heavy weights.

no swiss balls, balanced boards or DB's required

Agree 100%.

Squats, Deadlifts, Bench Press, Military Press, Bent over rows, Dips and Chin-ups with the occasional set of barbell curls is all i do. Might be a few more, but

those are the key exercises.

My weight varies from 88-100kgs, from 13-20% bodyfat.

A few people on this forum know me personally and can vouch for how I look lol :P

Pretty sure I've posted pics here before too....might have been NS.com though (which I haven't been on in agesss)

every guy wants to be stronger than the next.

Hmmm not all of them. Many, and I would say most people weight training at the gym just want to look better (usually that includes being bigger, but not always) than the next guy...being that muscular builds are a plus with pleasing the opposite sex and visually warding off those who threaten one's security. Well that's their initial entry into exercise anyway. It is a small minority of people who have a proper need/use for the strength in everyday life and get into weight training for that reason. Hence why core strength exercises are ignored by most. We naturally draw a correlation between size and strength even if we acknowledge this correlation isn't always applicable, because most of the time it is. Lots of people want to be stronger simply because more strength is a performance indicator of physical results achieved...in conjunction with what the mirror has to offer, i.e. "I'm stronger than I used to be so I must have put on muscle".

What do you use your strength for?

I use my strength to get stronger.

seen your pics on NS Ali.

The point of the article I posted was that a skinny guy gained 55lbs (roughly 22kg) by eating alot of calories and doing basic movements 3 times a week.

none of those movements involved DIRECT bicep work, tricep work, calf work, forearm work, abs work, and general isolation crap.

Article goes on to say that 31lbs of that weight gain was lean muscle mass.

the 2 pics show that he still looks lean because he was truly a skinny kid.

All in 11 weeks.

If he had eaten the same amount of calories and went to the gym and did what most beginners do and pick up an EZ bar and do curls and leg presses, he would not have made anywhere near the same muscle gain.

alot more fat.

He was a true novice and 20 years old so it was the perfect scenario for big gains.

not only did he get stronger, he got bigger.

Someone on this thread mentioned wishing he was fat to begin with because he can't gain weight.

but listed 2 or 3 supplements they were taking.

were they eating 6000 calories a day including a 4 litres of milk?

were they doing the basic compound movements?

or where they doing 3 types of bicep curls and leg ext with 3 second holds in the locked position?

In reality though, no 18-22 year old carnt is going to listen to anyone giving advice that says "do squats, deads and bench and eat heaps and you'll get big and strong"

they'll read it and go "pfftt.. this dickhead didn't even mention alternate DB curls while lying face down on an incline bench.. why would I listen to him"

each to their own.

I use my strength to get stronger.

seen your pics on NS Ali.

The point of the article I posted was that a skinny guy gained 55lbs (roughly 22kg) by eating alot of calories and doing basic movements 3 times a week.

none of those movements involved DIRECT bicep work, tricep work, calf work, forearm work, abs work, and general isolation crap.

Article goes on to say that 31lbs of that weight gain was lean muscle mass.

the 2 pics show that he still looks lean because he was truly a skinny kid.

All in 11 weeks.

If he had eaten the same amount of calories and went to the gym and did what most beginners do and pick up an EZ bar and do curls and leg presses, he would not have made anywhere near the same muscle gain.

alot more fat.

He was a true novice and 20 years old so it was the perfect scenario for big gains.

not only did he get stronger, he got bigger.

Someone on this thread mentioned wishing he was fat to begin with because he can't gain weight.

but listed 2 or 3 supplements they were taking.

were they eating 6000 calories a day including a 4 litres of milk?

were they doing the basic compound movements?

or where they doing 3 types of bicep curls and leg ext with 3 second holds in the locked position?

In reality though, no 18-22 year old carnt is going to listen to anyone giving advice that says "do squats, deads and bench and eat heaps and you'll get big and strong"

they'll read it and go "pfftt.. this dickhead didn't even mention alternate DB curls while lying face down on an incline bench.. why would I listen to him"

each to their own.

You seem to think that everyone is either doing one or the other and nobody is doing both. I do lots of deads, squats, bent over rows, eat a shit load of calories (probably too much) and i also do "DIRECT bicep work, tricep work, calf work, forearm work, abs work, and general isolation crap"

In reality though, no 18-22 year old carnt is going to listen to anyone giving advice that says "do squats, deads and bench and eat heaps and you'll get big and strong"

they'll read it and go "pfftt.. this dickhead didn't even mention alternate DB curls while lying face down on an incline bench.. why would I listen to him"

each to their own.

This is true. The younger set are usually inspired by thier hero's and just want to emulate them, rather than understanding or questioning the facts that sit behind why their muscles develop. I think this is still a good thing despite it having pitfalls, as they still usually get the 'novice' effect from it and it gets them interested and sometimes committed to a healthy body. On the down side it can also take you down the path of body dismorphic syndrome. Something that is on the increase amongst young trainers.Being focused on what you look like in the gym is the stepping stone to this disorder as 'what you look like' is a very subjective thing.

The article you put up is quite good at explaining 'why' things happen in basic detail. It's a tad wordy but, no where near as bad as the sports science stuff I had to wade through a few years back. The guy in the article has clearly gone through an impressive change to his physique in the short time of his training.

To bascially summarise the article, when you are trying to get bigger muscles, you must convince your body that you need more muscle and assist it to grow them.

The body grows more muscle to cope with greater forces than it was in a state to cope with originally. So in order to become bigger you will become stronger by this. The full equation alluded to in the article involves more than most realise including diet, rest ,bone and nervous system development.

My own volume of training may seem low to some but, if you realise how much trauma is caused in the lifts due to the forces. How much food and rest it 'costs' to repair and even grow extra muscle. Not to mention the total system shock it causes to the body.

You see the gym for what it is, a place of controlled destruction.

Your home ,with it's comfortable bed and fridge, is the place of controlled rebuilding and contruction.

Emotionally, being at home after a workout 'should' make you feel far better than being in the Gym. That is afterall where all the 'body building' is occuring. As you have said GTST, this is also where diet and rest are such a huge factor in limiting your potential.

You seem to think that everyone is either doing one or the other and nobody is doing both. I do lots of deads, squats, bent over rows, eat a shit load of calories (probably too much) and i also do "DIRECT bicep work, tricep work, calf work, forearm work, abs work, and general isolation crap"

There is no problem in doing isolation work, if you do it sometimes for say a pump (which is what i do lol) or if you are an advanced lifter

whereby you need the isolation exercises to polish off your body (nobody here is at that level unless they are heavyweight competitive bodybuilder).

The problem is, too many people focus on the isolation exercises and don't know how to squat properly, or deadlift.

Its just bench, dumbbells, repeat. You aren't going to get huge on a isolation routine. At least this is what I see on a day to day basis. Anyone that knows what they are doing gets the comment

"oh i could look like that too if I was on the juice."

By and large, the fitness industry in Australia is a joke. The gyms are a joke. The supps are a joke. The trainers (most of them) are a joke. One great big joke. lol.

Funny and sad at the same time. Funny because it shows how people are gullible. But I get upset when I see a 50kg 18 year old in the gym with a gym instructor telling them to do 5 sets of bicep curls for 8 to 12 reps for growth in the arms and not to squat/deadlift because it can damage your back.

You use your strength to be stronger? Why do you want to be stronger though? What part of life is it going to be used in? I'm just curious. I think there's more useful benefit in the modern day to looking the part as opposed to having so called "useful" muscle. I mean, we're not all lugging boulders anymore and martial arts has been proven time and time again to be more effective in a fight than strength. I think you look at these guys and get a hate on for what they are doing simply because they are doing something different to you and have different goals for their exercise.

I'm with topher...not everyone is swayed towards either one. I do a combination of compound and isolation exercises too. Personally I'm not a fan of the bodyshape that a completely compound workout gives people...I've seen it, my friends have it...do not want. Combination of the two gives some very nice balanced results: mass combined with attractive toned muscle. There's plenty of crossover between the two as well, because doing isolation exercises on core strength muscles like abs will help you with a few compound exercises. Someone a while back said lat pulldown wasn't a compound exercise...that's a complete load of shit.

Multiple sets are great for breaking down muscle...it is something that has to be done over time. Properly training them to rebuild in response to the resistance requires a reasonably frequent constant resistance, not a sporadic occurrence once a month. You can't break them down in a single fail set or 1 minutes of lifting per month because in 20 minutes time you'll be able to do the same thing again. Any gains you see are most likely natural muscle and weight. And how ignorant the whole world is spending their hours and hours at the gym :) I think alot of you minimum sets / maximum weight people would struggle to get through anything that requires stamina. Overtraining is a bullshit term that's overused by people who can't be bothered spending time at the gym. Real overtraining isn't doing too many sets at the gym to break down the muscles, it's not giving the muscles any decent recovery time.

Funny and sad at the same time. Funny because it shows how people are gullible. But I get upset when I see a 50kg 18 year old in the gym with a gym instructor telling them to do 5 sets of bicep curls for 8 to 12 reps for growth in the arms and not to squat/deadlift because it can damage your back.

What's wrong with that? Kid just wants bigger arms and that will get him that, quite safely too. All I did when I was 15 was dumbell curls at home and my arms blew up using this isolation exercise. If not done properly squats and deadlifts can damage your back. I do tons of freeweight compound exercises; they're my favourite...but any mates at the gym who have been out on injury are no coincidence the freeweight fans. And don't say it's because they don't know how to do the exercise, because professional powerlifters injure themselves from time to time...and more frequently than body builders I might add. We're not perfect beings, we all stuff up once in a while. The difference being that machines and isolation exercises are safer because there are less variables to it...that's why they're trained to instruct clients using them. If I was a personal trainer looking to keep his job and his clients that's where I'd be heading too.

topher has posted his pic.

if it's him, he's obviously solid and knows what to do.

problem is exactly what you said.. Fitness First and the likes.

and what they represent.

my gym is nothing like that.

I'd go as far as to say that my gym is better than most peoples.

IMG_0339.jpg

IMG_0338.jpg

Terrific response there chap, I can do that too, watch:

GTST there is so much wrong with what you are saying that I'm not even going to bother arguing. Doesn't really have much weighting though does it?

Reality: you came into this thread dick swinging and spouting some nazi bullshit about there only being one proper way to workout at the gym based on us all having the same goal, for whatever reason, and that everyone who doesn't practice what you do is ignorant.

yeah that is a pic of me.. this was me before training about 15-16 months ago second from left.

16B6vZ4QoLaY8t4ThWyZX26nQbsN990.jpeg

I get all my info from people who have had many years experience training such as my old man who used to compete in the early 90's and my uncle who has been training for 18+ years and still training. No offence to anyone but i don't really like getting info from internet bb's like on bb.com because all they really do is just sprout shit they read on another forum. That's not to say i don't take any info off the net, there is a wealth of knowledge if you look in the right places.

I guess i was lucky having them two growing up because they always used to drill into me how important it was to squat and dead lift so it is just natural for me to do it i guess. However they are both a fan of DB kick backs which got bagged before, i never used to do them but my uncle used to make me do it because he claimed it's gives you a good horseshoe (which is starting to come out good for me now).

But yeah end of the day everyone is entitled to their own opinion and just because they aren't doing what you are doesn't make them wrong. everybody is different and different things work for different people but the main thing people don't seem to understand is that no matter how hard you lift in the gym you won't grow unless you eat enough. There is a guy who is a personal trainer at my work and laughed at me when i told him how many calories i eat and said you don't need to eat alot to grow. how are you supposed to grow when calories burnt are more then calories in? In all honesty i probably eat a bit too much and have put on a bit more bf % then i should have but i don't care because i am just making sure i am getting enough food into me to grow and i'm gonna lose the fat when i cut anyway so why risk putting myself short in the growth department? There are a few people who like to give me shit and try and call me a fat flamin mongrel with no idea but these are the same people who ahve been going gym for a few years and made no progress at all, all they need to do is look at off season BB's and see how much fat they carry to realise that they infact are the idiots with no idea -_-

Edited by topher_

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Any update on this one? did you manage to get it fixed?    i'm having the same issue with my r34 and i believe its to do with the smart entry (keyless) control module but cant be sure without forking out to get a replacement  
    • So this being my first contribution to the SAU forums, I'd like to present and show how I had to solve probably one of the most annoying fixes on any car I've owned: replacing a speedometer (or "speedo") sensor on my newly acquired Series 1 Stagea 260RS Autech Version. I'm simply documenting how I went about to fix this issue, and as I understand it is relatively rare to happen to this generation of cars, it is a gigantic PITA so I hope this helps serve as reference to anyone else who may encounter this issue. NOTE: Although I say this is meant for the 260RS, because the gearbox/drivetrain is shared with the R33 GTR with the 5-speed manual, the application should be exactly the same. Background So after driving my new-to-me Stagea for about 1500km, one night while driving home the speedometer and odometer suddenly stopped working. No clunking noise, no indication something was broken, the speedometer would just stop reading anything and the odometer stopped going up. This is a huge worry for me, because my car is relatively low mileage (only 45k km when purchased) so although I plan to own the car for a long time, a mismatched odometer reading would be hugely detrimental to resale should the day come to sell the car. Thankfully this only occurred a mile or two from home so it wasn't extremely significant. Also, the OCD part of me would be extremely irked if the numbers that showed on my dash doesn't match the actual ageing of the car. Diagnosing I had been in communication with the well renown GTR shop in the USA, U.P.garage up near University Point in Washington state. After some back and forth they said it could be one of two things: 1) The speedometer sensor that goes into the transfer case is broken 2) The actual cluster has a component that went kaput. They said this is common in older Nissan gauge clusters and that would indicate a rebuild is necessary. As I tried to figure out if it was problem #1, I resolved problem #2 by sending my cluster over to Relentless Motorsports in Dallas, TX, whom is local to me and does cluster and ECU rebuilds. He is a one man operation who meticulously replaces every chip, resistor, capacitor, and electronic component on the PCB's on a wide variety of classic and modern cars. His specialty is Lexus and Toyota, but he came highly recommended by Erik of U.P.garage since he does the rebuilds for them on GTR clusters.  For those that don't know, on R32 and R33 GTR gearboxes, the speedometer sensor is mounted in the transfer case and is purely an analog mini "generator" (opposite of an alternator essentially). Based on the speed the sensor spins it generates an AC sine wave voltage up to 5V, and sends that via two wires up to the cluster which then interprets it via the speedometer dial. The signal does NOT go to the ECU first, the wiring goes to the cluster first then the ECU after (or so I'm told).  Problems/Roadblocks I first removed the part from the car on the underside of the transfer case (drain your transfer case fluid/ATF first, guess who found out that the hard way?), and noted the transfer case fluid was EXTREMELY black, most likely never changed on my car. When attempting to turn the gears it felt extremely gritty, as if something was binding the shaft from rotating properly. I got absolutely no voltage reading out of the sensor no matter how fast I turned the shaft. After having to reflow the solder on my AFM sensors based on another SAU guide here, I attempted to disassemble the silicone seal on the back of the sensor to see what happened inside the sensor; turns out, it basically disintegrated itself. Wonderful. Not only had the electrical components destroyed themselves, the magnetic portion on what I thought was on the shaft also chipped and was broken. Solution So solution: find a spare part right? Wrong. Nissan has long discontinued the proper sensor part number 32702-21U19, and it is no longer obtainable either through Nissan NSA or Nissan Japan. I was SOL without proper speed or mileage readings unless I figured out a way to replace this sensor. After tons of Googling and searching on SAU, I found that there IS however a sensor that looks almost exactly like the R33/260RS one: a sensor meant for the R33/R34 GTT and GTS-T with the 5 speed manual. The part number was 25010-21U00, and the body, plug, and shaft all looked exactly the same. The gear was different at the end, but knowing the sensor's gear is held on with a circlip, I figured I could just order the part and swap the gears. Cue me ordering a new part from JustJap down in Kirrawee, NSW, then waiting almost 3 weeks for shipping and customs clearing. The part finally arrives and what did I find? The freaking shaft lengths don't match. $&%* I discussed with Erik how to proceed, and figuring that I basically destroyed the sensor trying to get the shaft out of the damaged sensor from my car. we deemed it too dangerous to try and attempt to swap shafts to the correct length. I had to find a local CNC machinist to help me cut and notch down the shaft. After tons of frantic calling on a Friday afternoon, I managed to get hold of someone and he said he'd be able to do it over half a week. I sent him photos and had him take measurements to match not only the correct length and notch fitment, but also a groove to machine out to hold the retentive circlip. And the end result? *chef's kiss* Perfect. Since I didn't have pliers with me when I picked up the items, I tested the old gear and circlip on. Perfect fit. After that it was simply swapping out the plug bracket to the new sensor, mount it on the transfer case, refill with ATF/Nissan Matic Fluid D, then test out function. Thankfully with the rebuilt cluster and the new sensor, both the speedometer and odometer and now working properly!   And there you have it. About 5-6 weeks of headaches wrapped up in a 15 minute photo essay. As I was told it is rare for sensors of this generation to die so dramatically, but you never know what could go wrong with a 25+ year old car. I HOPE that no one else has to go through this problem like I did, so with my take on a solution I hope it helps others who may encounter this issue in the future. For the TL;DR: 1) Sensor breaks. 2) Find a replacement GTT/GTS-T sensor. 3) Find a CNC machinist to have you cut it down to proper specs. 4) Reinstall then pray to the JDM gods.   Hope this guide/story helps anyone else encountering this problem!
    • So this being my first contribution to the SAU forums, I'd like to present and show how I had to solve probably one of the most annoying fixes on any car I've owned: replacing a speedometer (or "speedo") sensor on my newly acquired Series 1 Stagea 260RS Autech Version. I'm simply documenting how I went about to fix this issue, and as I understand it is relatively rare to happen to this generation of cars, it is a gigantic PITA so I hope this helps serve as reference to anyone else who may encounter this issue. NOTE: Although I say this is meant for the 260RS, because the gearbox/drivetrain is shared with the R33 GTR with the 5-speed manual, the application should be exactly the same. Background So after driving my new-to-me Stagea for about 1500km, one night while driving home the speedometer and odometer suddenly stopped working. No clunking noise, no indication something was broken, the speedometer would just stop reading anything and the odometer stopped going up. This is a huge worry for me, because my car is relatively low mileage (only 45k km when purchased) so although I plan to own the car for a long time, a mismatched odometer reading would be hugely detrimental to resale should the day come to sell the car. Thankfully this only occurred a mile or two from home so it wasn't extremely significant. Also, the OCD part of me would be extremely irked if the numbers that showed on my dash doesn't match the actual ageing of the car. Diagnosing I had been in communication with the well renown GTR shop in the USA, U.P.garage up near University Point in Washington state. After some back and forth they said it could be one of two things: 1) The speedometer sensor that goes into the transfer case is broken 2) The actual cluster has a component that went kaput. They said this is common in older Nissan gauge clusters and that would indicate a rebuild is necessary. As I tried to figure out if it was problem #1, I resolved problem #2 by sending my cluster over to Relentless Motorsports in Dallas, TX, whom is local to me and does cluster and ECU rebuilds. He is a one man operation who meticulously replaces every chip, resistor, capacitor, and electronic component on the PCB's on a wide variety of classic and modern cars. His specialty is Lexus and Toyota, but he came highly recommended by Erik of U.P.garage since he does the rebuilds for them on GTR clusters.  For those that don't know, on R32 and R33 GTR gearboxes, the speedometer sensor is mounted in the transfer case and is purely an analog mini "generator" (opposite of an alternator essentially). Based on the speed the sensor spins it generates an AC sine wave voltage up to 5V, and sends that via two wires up to the cluster which then interprets it via the speedometer dial. The signal does NOT go to the ECU first, the wiring goes to the cluster first then the ECU after (or so I'm told).  Problems/Roadblocks I first removed the part from the car on the underside of the transfer case (drain your transfer case fluid/ATF first, guess who found out that the hard way?), and noted the transfer case fluid was EXTREMELY black, most likely never changed on my car. When attempting to turn the gears it felt extremely gritty, as if shttps://imgur.com/6TQCG3xomething was binding the shaft from rotating properly. After having to reflow the solder on my AFM sensors based on another SAU guide here, I attempted to disassemble the silicone seal on the back of the sensor to see what happened inside the sensor; turns out, it basically disintegrated itself. Wonderful. Not only had the electrical components destroyed themselves, the magnetic portion on what I thought was on the shaft also chipped and was broken. Solution So solution: find a spare part right? Wrong. Nissan has long discontinued the proper sensor part number 32702-21U19, and it is no longer obtainable either through Nissan NSA or Nissan Japan. I was SOL without proper speed or mileage readings unless I figured out a way to replace this sensor. After tons of Googling and searching on SAU, I found that there IS however a sensor that looks almost exactly like the R33/260RS one: a sensor meant for the R33/R34 GTT and GTS-T with the 5 speed manual. The part number was 25010-21U00, and the body, plug, and shaft all looked exactly the same. The gear was different at the end, but knowing the sensor's gear is held on with a circlip, I figured I could just order the part and swap the gears. Cue me ordering a new part from JustJap down in Kirrawee, NSW, then waiting almost 3 weeks for shipping and customs clearing. The part finally arrives and what did I find? The freaking shaft lengths don't match. $&%* I discussed with Erik how to proceed, and figuring that I basically destroyed the sensor trying to get the shaft out of the damaged sensor from my car. we deemed it too dangerous to try and attempt to swap shafts to the correct length. I had to find a local CNC machinist to help me cut and notch down the shaft. After tons of frantic calling on a Friday afternoon, I managed to get hold of someone and he said he'd be able to do it over half a week. I sent him photos and had him take measurements to match not only the correct length and notch fitment, but also a groove to machine out to hold the retentive circlip. And the end result? *chef's kiss* Perfect. Since I didn't have pliers with me when I picked up the items, I tested the old gear and circlip on. Perfect fit. After that it was simply swapping out the plug bracket to the new sensor, mount it on the transfer case, refill with ATF/Nissan Matic Fluid D, then test out function. Thankfully with the rebuilt cluster and the new sensor, both the speedometer and odometer and now working properly!   And there you have it. About 5-6 weeks of headaches wrapped up in a 15 minute photo essay. As I was told it is rare for sensors of this generation to die so dramatically, but you never know what could go wrong with a 25+ year old car. I HOPE that no one else has to go through this problem like I did, so with my take on a solution I hope it helps others who may encounter this issue in the future. For the TL;DR: 1) Sensor breaks. 2) Find a replacement GTT/GTS-T sensor. 3) Find a CNC machinist to have you cut it down to proper specs. 4) Reinstall then pray to the JDM gods.   Hope this guide/story helps anyone else encountering this problem!
    • perhaps i should have mentioned, I plugged the unit in before i handed over to the electronics repair shop to see what damaged had been caused and the unit worked (ac controls, rear demister etc) bar the lights behind the lcd. i would assume that the diode was only to control lighting and didnt harm anything else i got the unit back from the electronics repair shop and all is well (to a point). The lights are back on and ac controls are working. im still paranoid as i beleive the repairer just put in any zener diode he could find and admitted asking chatgpt if its compatible   i do however have another issue... sometimes when i turn the ignition on, the climate control unit now goes through a diagnostics procedure which normally occurs when you disconnect and reconnect but this may be due to the below   to top everything off, and feel free to shoot me as im just about to do it myself anyway, while i was checking the newly repaired board by plugging in the climate control unit bare without the housing, i believe i may have shorted it on the headunit surround. Climate control unit still works but now the keyless entry doesnt work along with the dome light not turning on when you open the door. to add to this tricky situation, when you start the car and remove the key ( i have a turbo timer so car remains on) the keyless entry works. the dome light also works when you switch to the on position. fuses were checked and all ok ive deduced that the short somehow has messed with the smart entry control module as that is what controls the keyless entry and dome light on door opening   you guys wouldnt happen to have any experience with that topic lmao... im only laughing as its all i can do right now my self diagnosed adhd always gets me in a situation as i have no patience and want to get everything done in shortest amount of time as possible often ignoring crucial steps such as disconnecting battery when stuffing around with electronics or even placing a simple rag over the metallic headunit surround when placing a live pcb board on top of it   FML
    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
×
×
  • Create New...