Jump to content
SAU Community

Recommended Posts

That's why I took a job in ruck, someone else's stomach is the perfect cushioning device.

Cycling also good for shedding pounds though, boxing is a good addition if you don't already do it.

That's why I took a job in ruck, someone else's stomach is the perfect cushioning device.

Cycling also good for shedding pounds though, boxing is a good addition if you don't already do it.

Have a read of http://www.ptcfrankston.com/doc/newsletter/PTC_Newsletter_IssueNo37.html

Cycling/jogging are some of the slowest ways to lose bodyfat.

Have a read of http://www.ptcfrankston.com/doc/newsletter/PTC_Newsletter_IssueNo37.html

Cycling/jogging are some of the slowest ways to lose bodyfat.

Yeah...I'm not a fan of his teachings/attitude...I can't sit through another PTC newsletter sorry. Slow or not, cycling is safer on the knees than impact exercise and given RBNT can't run on his knees...

cycling is a good way to lose fat as long as you push yourself...same as any cardio

True that,

as long as you're within YOUR fat burning heart rate (usually 130-150 or slightly less) there should be no dramas.

Yeah...I'm not a fan of his teachings/attitude...I can't sit through another PTC newsletter sorry. Slow or not, cycling is safer on the knees than impact exercise and given RBNT can't run on his knees...

His attitude is actually quite different in person.

Anyway, jogging/running is obviously out for RBNT if he has knee issues.

I can't understand his knee issue, there's an interesting thread about wrecked knee's and squat's here http://ausbb.com/injuries-rehab/13196-who-has-long-term-experience-wrecked-knees-squats.html

If you don't know how to squat properly though it might not work :(

Cycling can do knee damage too, just less than jogging :)

If you really want to do cycling, HIIT does work best, so high intensity interval training is the most effective form of cardio.

Although I'd still recommend tabata thrusters, depending on your knee issue you may be able to squat down with 8kg weights (or maybe not).

NissanSiliva had a thread about this a while ago, but the forum has gone downhill, all the serious posters are on ausbb.com

He probably is, I'm not going to judge the guy in real life as I've never met him but I just can't stand those newsletters and I've read a few of them to give them a decent go. Not saying it's bad advice, but the way it is written and pays out on other methods/teachings bothers me.

I say cycling cause, whilst I too don't know the extent of RBNT's knee injury, most people with leg injuries who can't run have still been able to cycle. Probably becasue of the "cyclic" motion of it, there's no impact as such, or chance of hyperextension etc.

Ive got my bike on the trainer and seems to be fine, walking is fine too. Its just the running thats no good. My Dads knees are the same, shot, he cant exercise properly not which is a shame. I would like to protect mine for as long as possible.

I only run if I'm being chased... most boring sport/hobby known to mankind... even worse is the people that buy gym memberships just to run or cycle on the machines... running is free, why are you paying for it!?

I play basketball and do some boxing for cardio... it keeps me entertained so I don't quit out of boredom

I'm jealous of those who have the motivation to ride to work... it would save me money and get me fitter... I'm still thinking about getting a bike... its only been 7 years, I'm sure the motivation will come soon lol

You do have to be a certain type to enjoy running...alot of people listen to music to pass the time. Personally I use a stopwatch...when you do the same run all the time it's good fun trying to beat previous times at certain waypoints / breaking personal records. Gives good time to think about life problems etc.

Cycling is great for knees, depending on the injury.

I snapped my ACL and totally screwed up other parts of my knee (on the bike) and the only thing stopping me from riding again was range of movement. I'm now on the bike again and it's the only physical thing i can do properly. It feels great!

It's also good for losing weight but you have to put some effort in because it's very easy to just pedal along and not even break a sweat. I ride offroad alot and it's great for getting the heart rate to 200 (burns like hell haha) and for both leg and upper body strength. But again it depends how/where you ride and how much effort you put in.

I hate running, always have and at the moment i can only run for very short periods before my knee blows up (about 6 months post op) but everything and anything on the bike is perfect! I ride a Santacruz Blur and love every second of it, sitting on the couch not being able to walk is the worst thing ever.

But i find riding one or two sessions a week yeilds bigger results that ridding every day. I've been doing a usual 3hr Saturday morning ride at Mt Cootha (In the bush) along with weight training during the week and i've lost 9kgs in the last 11 weeks.

The only way to do cardio is the fun way. Find something you like to do and do it. I absolutely love mountain biking, I've been doing it since i was 10 and so every time i ride it's just fun as with the added bonus of great cardio.

Edited by sholm23

<cut>

It's also good for losing weight but you have to put some effort in because it's very easy to just pedal along and not even break a sweat. I ride offroad alot and it's great for getting the heart rate to 200 (burns like hell haha) and for both leg and upper body strength. But again it depends how/where you ride and how much effort you put in.

<cut>

HIIT is the most effective. But if your aiming for weight loss the *only* thing you main issue is your diet. When they get obese people to lose weight they have them do zero exercise and just eat correctly, this is because they want to control there weight loss and they can't afford the extra food from getting them to exercise lol

Yeh thats true. Weight loss comes down to purely nutrition. Add in some exercise and you can pull off fat loss.

My point was that you could do, for example, riding around Australia and still gain weight.

Diet is more important in terms of weight loss...it's also harder than doing a few hard sessions as you eat much more often.

Any other Rowers here?

In full season we knock out 5-6 on water sessions a week, anywhere from 10-24km a session. Then 3 weights sessions, up to two hours on the rowing machine, a few runs and mish mashed other sessions as well asa 60-90km cycle on Sunday.

Certainly gets the job done. Lost 13 kg when I started and have built back up to 92kg again.

Loving it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • perhaps i should have mentioned, I plugged the unit in before i handed over to the electronics repair shop to see what damaged had been caused and the unit worked (ac controls, rear demister etc) bar the lights behind the lcd. i would assume that the diode was only to control lighting and didnt harm anything else i got the unit back from the electronics repair shop and all is well (to a point). The lights are back on and ac controls are working. im still paranoid as i beleive the repairer just put in any zener diode he could find and admitted asking chatgpt if its compatible   i do however have another issue... sometimes when i turn the ignition on, the climate control unit now goes through a diagnostics procedure which normally occurs when you disconnect and reconnect but this may be due to the below   to top everything off, and feel free to shoot me as im just about to do it myself anyway, while i was checking the newly repaired board by plugging in the climate control unit bare without the housing, i believe i may have shorted it on the headunit surround. Climate control unit still works but now the keyless entry doesnt work along with the dome light not turning on when you open the door. to add to this tricky situation, when you start the car and remove the key ( i have a turbo timer so car remains on) the keyless entry works. the dome light also works when you switch to the on position. fuses were checked and all ok ive deduced that the short somehow has messed with the smart entry control module as that is what controls the keyless entry and dome light on door opening   you guys wouldnt happen to have any experience with that topic lmao... im only laughing as its all i can do right now my self diagnosed adhd always gets me in a situation as i have no patience and want to get everything done in shortest amount of time as possible often ignoring crucial steps such as disconnecting battery when stuffing around with electronics or even placing a simple rag over the metallic headunit surround when placing a live pcb board on top of it   FML
    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
×
×
  • Create New...