Jump to content
SAU Community

Recommended Posts

After alot of debating between a C10, another DR30, R32 GT-R or something practicle I can use everyday.

I've made up my mind, it has to be the C10!

Does anyone know of any being complied in Australia and wether it was a pretty straight forward like any other import? or a complete and utter headf**k???

Also is much interchangable with more modern suspension/handling or will I be spending alot of time on a lathe/mill putting my toolmaking experiance into play customising parts to fit.

Basic compliance on the old girls, side intrusion bars rear retractables and rear parcel shelf anchors and a engineers sign off, if you're in Perth ring Tenagah Ant there is very experienced in compliancing and he has a ..... 78 SKyline, same will apply for a dr unlike a 32 gtr that will require raws spec full compliance and large bill

Thanks guys :thanks:

For the time being wont be off to perth anymore, I unexpectedly got offered a new job not too long ago here in Adelaide, and the money was way too good to refuse :PBJ:

also can someone give a me a good indication what I should actually be paying for a C10. I have seen some on some importer sites I wont name for $20-25,000+ (non complied)

But some sites i found awhile back (in japan) I could swear were around AU$10,000-$15,000. (would have to add shipping)

Cos my very good friend from Hong Kong frequents Japan and constantly is telling me how much cars actually cost in Japan and compliance + shipping costs + $1000 fee doesnt quite add up to what some of these importers are charging (FD RX-7 is a really great example), I just dont want the wool pulled over my eyes.

Can someone en-lighten me.

I wont be looking for something immaculate, just something that isnt a rust heap and complete.

Edited by benny_blanco

So what part of Adelaide are you going to

also SA has a VERY small car scene its bad, but mallala a drift track 50KM or so out of the city / my suburb holds drift days pfft once a month

soz to burst the bubble

Im allready in Adelaide :)

Was going to move to Perth until I got a very good job offer, which made me want to stay for another 12months.

In 12 months time who knows, the club scene in Adelaide is shithouse x100! And has made impossible to move any further DJ'n (as i refuse to play commercial garbage), apart from playing for the odd Internationals these days, here I am ''too underground'' for Adelaide!

The Adelaide hills are fun enough! why bother going to Mallala :D

Now back to the topic :/

Edited by benny_blanco
So what part of Adelaide are you going to

also SA has a VERY small car scene its bad, but mallala a drift track 50KM or so out of the city / my suburb holds drift days pfft once a month

soz to burst the bubble

Small car scene???? You obviously don't know the right people, people tend to keep on the down low these days.

You pay shipping, buyer's fee in Japan, plus import duty and GST on the FOB price.

You can definitely save money by buying and importing your own car, but if anything goes wrong, then you're in a whole lot of trouble (potentially). Many people look at the importer's fee as buying peace of mind. It cost me about $2k on top of what I could potentially have bought my R32 skyline for 7 years ago. Well worth the money in my opinion.

If you need to save every last $$ then have a go for yourself, but be aware that you may have a lot of leg work to do - very daunting for a first timer.

If you have to pay a reputable importer a couple of grand to get you the car you want, then I reckon it;s money well spent.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
×
×
  • Create New...