Jump to content
SAU Community

Garret 2860's -10

monga

By monga,
in Engines & Forced Induction

 Share

Recommended Posts

Blue_GTR Enthusiast

Blue_GTR

Posted
Posted
Why?

They are only rated 50ps more than 2530's ? (GTRS)

Thats 100hp overall, going GTRS(or -10) compared to 2530(or -5) will come onto full boost later and therefore be a laggier. If you dont mind sacrificing a bit of bottom end power/driveability and a more narrow powerband, then go for the -10's

Im using HKS 2530's with standard bottom end making 360kw atw on 1.3bar and 300kw atw on 1bar, that is plenty of power for the street. I would never go GTRS or -10 on a street car... My 2 cents >_<

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • robbo_rb180
      Best chassis for motorsport use

      By robbo_rb180 · Posted

      Best bang for buck at the moment would be a 86/brz. Good chassis,  plenty of aftermarket support and parts everywhere.   I just picked one up with some quality gear and it drives better than my old 180sx.    Also depending on what your doing and budget.  An a90 supra is my pick if want to spend more. Great chassis, solid motor, gearbox is good. Development potential is crazy. They are doing well in prod sport and time attack. All the old jdm stuff needs alot of work as most of it all bent and over priced.
    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      It's basically the same platform, hence why everything bolts to everything else Kelford camshafts were recommended by Mania after they asked me what I want the car for, I said "I'll thrash it around daily and maybe take it to the track for fun" 🤣 Factory NC 2.0L cam specs: - Adv. Dur. 256 /256 - Dur @ .050 205 /190 - Lift 9.42mm/8.13mm So, as I know nothing about cam specs, all I can say is the numbers are different and it should get a little bit of lope....🤣
    • Dose Pipe Sutututu
      Best chassis for motorsport use

      By Dose Pipe Sutututu · Posted

      Depends on how extreme, however if you look at SMSP, they're all dominated by Hondas and M cars on amateur/street car events. 
    • MBS206
      Is this pressure plate warped? And do I need a new one?

      By MBS206 · Posted

      Without better pictures, it won't be possible for anyone to work it out further than we have.   Start measuring, EVERYTHING. Thickness of flywheel, and all around it. You want to know is if everything parallel. If from the face of the pressure plate (that bolts to the flywheel) if it is parallel to the pressure plate face, then something is NOT parallel or equal elsewhere. Or you've bent the shit out of the fingers in the pressure plate.
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      Finally getting around to changing whole cold side. (Look at that sludge) lets see where this leads once it’s all together tomorrow.
×
×
  • Create New...