Jump to content
SAU Community

Alarm Problem

Dani Boi

By Dani Boi,
in Car Audio & Electrical

 Share

Recommended Posts

Dani Boi Grand Master

Dani Boi

Posted
Posted

When I was driving home today in the pooring/flooded rain I noticed that my car alarm light inside my car started to flash, I didn't think much to it at first but when I got home and turned the car off it still was flashing then realised I cant even "arm" my car nor can I even turn the car on!!!

I'm thinking that maybe it is a cause of the flooded water going up and inside my car? I've tried just disconnecting my battery running it flat and then reconnecting it but it's still doing the same thing...

Anyone has a similar problem? Any help would be good :happy:

Its an autowatch alarm btw

Link to comment
https://www.sau.com.au/forums/topic/221716-alarm-problem/
Share on other sites
Chris Rogers Grand Master

Chris Rogers

Posted
Posted

siren is probably full of water. pull it out and dry it. alarm module shares the same supply as the siren and VERY few people fuse them so when it gets a short in it the alarm module will do a lot of strange things.

Link to comment
https://www.sau.com.au/forums/topic/221716-alarm-problem/#findComment-3909184
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • DraftySquash
      Help Understand GTT Boost Setup

      By DraftySquash · Posted

      It was roughly 3.5 hours.    car went in around 11:00 and I was done around 2:30 He did the initial runs, install the BC and then Nistune install and tune.  The best part was sitting in the lobby and hearing the skyline on full throttle at the dyno 😂😂
    • Milkmun
      Help Understand GTT Boost Setup

      By Milkmun · Posted

      Glad it all went smooth. How long did the tuning process take?
    • DraftySquash
      Help Understand GTT Boost Setup

      By DraftySquash · Posted

      Yeah that was kind of the same feedback my tuner gave me.  the boost tee is until I can sort out my plan for the electronic boost controller and what I’d get, where I’d mount the dash etc.  I’m happy with this until I can figure it out. Not a big fan of the A-pillar gauges. I’d like to get a clean install of the boost gauge - something digital like GFB.  Something like that might fit neatly where the ashtray is and look clean. I feel like replacing the OEM triple gauge is a bit extreme for a weekender like my skyline. And it’s not making crazy power to need all the additional sensors/gauges. 
    • B-Boi34
      UniClutch

      By B-Boi34 · Posted

      I'm about to swap my box to Tremec T56 Magnum F & initially thinking of re-using my DCS twin plate (can get it re centred for the bigger spline) but it's been called out the box will be noisy (rattle) as the clutch is unsprung.  So I'm doing as much research as possible. I'm not so worried about holding the power as I'll go the track version which on paper will hold the maybe 1000hp I make. It's the longevity I worry about. DCS told me they don't use a sprung centre as it's just something that can break. The uni clutch has a very complicated sprung centre. Any one had or heard about any issues with it failing? Thanks in advance.
    • Kinkstaah
      Help Understand GTT Boost Setup

      By Kinkstaah · Posted

      Auto is at least 10% (from my real, actual experience with different torque converters and manual on the same setup) ~185rwkw at 11.6psi (peak!) is entirely what one would expect without a FMIC or anything else on the intake, it does bleed off towards the higher RPM so it's what, 9psi there? Note: There is nothing that can be done about this with a manual boost tee. If you want to hold it steady and gain more top end, well - You will need electronic boost control.....
×
×
  • Create New...