Jump to content
SAU Community

Recommended Posts

I'm not sure if i've been sent the correct part, as it arrived without the original packaging, and the supplier hasn't gotten back to me...

Is the picture below the complete Whiteline Front Camber Kit KCA348?

suspensionpartab0.png

Thanks, i'm still a novice when it comes to suspension bits!

Edited by Trav33
but they might be worth keeping anyway - your sway bar links are probably stuffed too.

Got brand new adjustables sent a couple weeks ago, just been waiting for the missing camber kit to arrive so i can get the lot installed. I'm doing front and rear camber kits, castor kit, subframe alignment, strut brace and front/rear adjustable sway bars. Put new coilovers in about a year ago, so the car should be good for handing + tyre wear now.

The are rear sway bar links that won't fit a standard Nissan swaybar. Reason being the Whiteline ones have the bottom locating bolt horizontal, NIssan have it vertical. Having said that if you can't return them for any reason let me know as I would be interested in buying them.

The are rear sway bar links that won't fit a standard Nissan swaybar. Reason being the Whiteline ones have the bottom locating bolt horizontal, NIssan have it vertical. Having said that if you can't return them for any reason let me know as I would be interested in buying them.

They fit the adjustable bar.

Cheers

Gary

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It was roughly 3.5 hours.    car went in around 11:00 and I was done around 2:30 He did the initial runs, install the BC and then Nistune install and tune.  The best part was sitting in the lobby and hearing the skyline on full throttle at the dyno 😂😂
    • Glad it all went smooth. How long did the tuning process take?
    • Yeah that was kind of the same feedback my tuner gave me.  the boost tee is until I can sort out my plan for the electronic boost controller and what I’d get, where I’d mount the dash etc.  I’m happy with this until I can figure it out. Not a big fan of the A-pillar gauges. I’d like to get a clean install of the boost gauge - something digital like GFB.  Something like that might fit neatly where the ashtray is and look clean. I feel like replacing the OEM triple gauge is a bit extreme for a weekender like my skyline. And it’s not making crazy power to need all the additional sensors/gauges. 
    • I'm about to swap my box to Tremec T56 Magnum F & initially thinking of re-using my DCS twin plate (can get it re centred for the bigger spline) but it's been called out the box will be noisy (rattle) as the clutch is unsprung.  So I'm doing as much research as possible. I'm not so worried about holding the power as I'll go the track version which on paper will hold the maybe 1000hp I make. It's the longevity I worry about. DCS told me they don't use a sprung centre as it's just something that can break. The uni clutch has a very complicated sprung centre. Any one had or heard about any issues with it failing? Thanks in advance.
    • Auto is at least 10% (from my real, actual experience with different torque converters and manual on the same setup) ~185rwkw at 11.6psi (peak!) is entirely what one would expect without a FMIC or anything else on the intake, it does bleed off towards the higher RPM so it's what, 9psi there? Note: There is nothing that can be done about this with a manual boost tee. If you want to hold it steady and gain more top end, well - You will need electronic boost control.....
×
×
  • Create New...