Jump to content
SAU Community

Recommended Posts

Ok I have been hearing a rattle from my engine and was wondering if you guys can help diagnose the prob? From reading others post in the forum I have come to the conclusion that is either lifters or an exhaust leak, maybe from the videos included you guys can help me diagnose better. Listen carefully and you can hear the rattle, 1)

2)

All suggestions are welcome and thanks for the help.

woah ..thats a very noisy engine. I'm no expert so i won't make any guessess... However my 34 GTT had/has a bit of lifter noise (mostly fixed up by oil change to thicker oil 10W40 recently) but it sounded like this one

I'm not sure why but your engine seems very noisy (almost like a V8 or a rexxy) and nothing like the lifter tapping noise as in the vid above

Edited by Delta Force
woah ..thats a very noisy engine. I'm no expert so i won't make any guessess... However my 34 GTT had/has a bit of lifter noise (mostly fixed up by oil change to thicker oil 10W40 recently) but it sounded like this one

I'm not sure why but your engine seems very noisy (almost like a V8 or a rexxy) and nothing like the lifter tapping noise as in the vid above

HMMMMMMM yea after watching that vid my engine does seem a whole lot louder than the engine in that vid. I am open to all suggestions so please let me hear them. Did the coilpack test all the coilpacks change the note of the engine so that means they are good or at least working and I am running all six cylinders. So please people help me out.

it sounds like your engine is idling normally, but its pretty damn loud. My first impression is exhaust leakage.

What is it like to drive?

My lifters are noisy when i start the car in very cold weather; sounds quite similar to the clip Denis posted. After a couple of minutes of idling the noise disappears

it sounds like your engine is idling normally, but its pretty damn loud. My first impression is exhaust leakage.

What is it like to drive?

My lifters are noisy when i start the car in very cold weather; sounds quite similar to the clip Denis posted. After a couple of minutes of idling the noise disappears

Well It still makes great power, haven't had it dynoed but it still feels responsive and it pulls nicely. Only prob I am having is when boosting at wot the car kinda surges and it doesn't get the 9psi quickly enough for me and if I run third or fourth gear out it overboost get like 13 psi towards the end of the rpm say like about by 6000 rpm or so, but I figure thats because the ebc is not configured correctly. The noise doesn't go away and upon inspecting my car I noticed that two of the bolts off the exhaust manifold are missing so far, at least from what I can see the first and last bolt.

I'd say so since they're part of the head ... try thicker oil first, that has fixed noisy lifters for a lot of people myself included (well fixed it 90%) I use Hi-Tec 10W40 (but any brand of the same viscosity should do the trick)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • haha don't worry I'm sue you've got more fun ahead buying a 30 year old turbo car....but at least you are in the right place to ask
    • some days eh? The keyless entry and interior light on/off with the key will be controlled by the Body Control Module, but I'm not certain where that is or what it looks like (you might get lucky with a search to get a part#, which could be printed on it). I'd start at the A pillar/ Under dash/kick panel on the driver's side
    • It might be hit and miss, but Nissan Genuine Parts and Pitworks are not the same thing, although both are available from Nissan Dealers with Nissan Part Numbers. Nissan Genuine Parts are the OEM stuff, Pitworks are their attempt to get people back from generic parts makers
    • I did end up getting it sorted, as GTSBoy said, there was a corroded connection and wire that needed to be replaced. I ended up taking out the light assembly, giving everything a good clean and re-soldered the old joints, and it came out good.
    • Wow, thanks for your help guys 🙏. I really appreciate it. Thanks @Rezz, if i fail finding any new or used, full or partial set of original Stage carpets i will come back to you for sure 😉 Explenation is right there, i just missed it 🤦‍♂️. Thanks for pointing out. @soviet_merlin in the meantime, I received a reply from nengun, and i quote: "Thanks for your message and interest in Nengun. KG4900 is for the full set of floor mats, while KG4911 is only the Driver's Floor Mat. FR, RH means Front Right Hand Side. All the Full Set options are now discontinued. However, the Driver's Floor Mat options are still available according to the latest information available to us. We do not know what the differences would be, but if you only want the one mat, we can certainly see what we can find out for you". Interesting. It seems they still have some "new old stock" that Duncan mentioned 🤔. I wonder if they can provide any photos......And i also just realized that amayama have G4900 sets. I'm tempted too. 
×
×
  • Create New...