R32/r33 Greddy Alloy Intake Pipe, Fuel Pressure Regulator, R33/s14 Castor Rods, R33 Jap Exhaust 3"--> 3.5" Massive Tip!

nigelswazi · November 29, 2008

Location: Adelaide , SA - Contact: - PM or SMS 0404998591

Got the following items that are no longer needed:

R32/R33 Alloy Intake Pipe complete with silicon hoses connectors, clamps etc - was told it was Greddy when purchased but has no signs of branding. This pipe sounds incredible when spooling and boosting really has to be heard to appreciate makes driving much more fun! A alloy intake pipe is essential for those running more boost than stock as the soft stock rubber hose starts to become a restriction and suck in.

The pipe has a BOV return and oil breather ports just like the stock rubber hose but also has a port for a intake air temp sensor (one is currently fitted) perfect for those who wish to monitor intake temps or run a MAP sensor based aftermarket computer like WOLF 3D, Haltech etc. The pipe is tapered gradually expanding from the stock turbo inlet to the AFM size which not only looks tuff but improves induction.

Price - $175

----------------------------------------------------------------------------------------------------------------------------------------------------

Monza M-Spec Fuel Pressure Regulator complete in box with gauge, hoses & fittings bought from Repco for $150. Price - $75 $60 FIRM

----------------------------------------------------------------------------------------------------------------------------------------------------

S14/R33 Castor Rods complete with all nuts and bolts required for fitting. Rods are in good condition with no sign of leaking from the bushes. Price - $50 pair

----------------------------------------------------------------------------------------------------------------------------------------------------

Innovate Motorsports LM-1 Wideband Kit complete with optional RPM Converter Kit to allow mapping of RPM/AFR. Cost over $700 new and used twice still complete in box. Price - $450

----------------------------------------------------------------------------------------------------------------------------------------------------

Z32 AFM Plug complete with clip, loom and installation instuctions for SR, CA and RB powered cars. - Price - $20

----------------------------------------------------------------------------------------------------------------------------------------------------

Japanese Fujitsubo Giken FGK Super High Flow Cat Back System to suit R33 GTS-t,

First up is my Japanese Fujitsubo Giken FGK Super High Flow Cat Back System to suit R33 GTS-t, will fit R34 with slight shortening and flange flipping round at cat end. This exhaust is extremely high flowing starting with 3" mandrel bend piping up to the flange and at this point the exhaust expands out to 3.5" piping all the way to the tuff cannon muffler with awesome tip. This makes clearance that bit better at the centre of the car for speed bumps etc whilst maintaining maximum flow.

I bought this system for $700 from local wreckers but then spent $200 on a new centre muffler as the old one had I small hole I didn't notice upon purchase for which I still have the receipt and warranty on that part. This exhaust is flanged in the centre making transportation a breeze I can undo the flange if required by buyer to make fitting into a normal car easier. Pics are below the black appearance to the lower half of the exhaust is from it being spray matt black so as not to draw attention from the cops I can remove the paint if required but I recommend it. Note silencer is not included in sale this was borrowed to clear defect.

Price - $400

----------------------------------------------------------------------------------------------------------------------------------------------------

R33 Viscous LSD Diff Complete in 4.1 Ratio NON-ABS Housing with 5 bolt half shafts in excellent condition with all ready to bolt in - Price - $200

----------------------------------------------------------------------------------------------------------------------------------------------------

Location - Adelaide , SA

Contact - PM or SMS 0404998591

Edited November 29, 2008 by nigelswazi

nigelswazi · November 30, 2008

PRICE DROP ON SOME ITEMS AND 18" TYRE ADDED AS BELOW

R32/R33 Alloy Intake Pipe complete with silicon hoses connectors, clamps etc - was told it was Greddy when purchased but has no signs of branding. This pipe sounds incredible when spooling and boosting really has to be heard to appreciate makes driving much more fun! A alloy intake pipe is essential for those running more boost than stock as the soft stock rubber hose starts to become a restriction and suck in.

The pipe has a BOV return and oil breather ports just like the stock rubber hose but also has a port for a intake air temp sensor (one is currently fitted) perfect for those who wish to monitor intake temps or run a MAP sensor based aftermarket computer like WOLF 3D, Haltech etc. The pipe is tapered gradually expanding from the stock turbo inlet to the AFM size which not only looks tuff but improves induction.

Price - $175 Now $160

----------------------------------------------------------------------------------------------------------------------------------------------------

Monza M-Spec Fuel Pressure Regulator complete in box with gauge, hoses & fittings bought from Repco for $150. Price - $75 $60 FIRM

----------------------------------------------------------------------------------------------------------------------------------------------------

S14/R33 Castor Rods complete with all nuts and bolts required for fitting. Rods are in good condition with no sign of leaking from the bushes. Price - $50 pair

----------------------------------------------------------------------------------------------------------------------------------------------------

Pirelli P-Zero Rosso 245/40/18 Tyre with 95% tread no longer have 18" wheels so no need for this tyres which retails for over $400. Price - $75