Jump to content
SAU Community

Recommended Posts

Frankly, don't see the point if it's a "daily". The car comes with oil pressure, water temp and boost gauges - why do you need to duplicate them. And the oil temp isn't likely to get out of control.

But if you must ...

Standard water temp guage is useless as. Even when I was hitting just on 100degC it hadn't moved from the middle.

I'd recommend an oil pressure gauge, and probably an oil temp gauge. The oil pressure for being so much more reliable, and the oil temp for actually knowing when your engine is properly up to temp.

I'm running aftermarket exhaust temp, oil temp, and boost gauge. All things not available in my car from factory. Oil pressure will be the next fitted.

Standard water temp guage is useless as. Even when I was hitting just on 100degC it hadn't moved from the middle.

I'd recommend an oil pressure gauge, and probably an oil temp gauge. The oil pressure for being so much more reliable, and the oil temp for actually knowing when your engine is properly up to temp.

I'm running aftermarket exhaust temp, oil temp, and boost gauge. All things not available in my car from factory. Oil pressure will be the next fitted.

Wouldn't fuel pressure be more important if i'm running an OEM Fuel pump( the fuel pump is know to die if reving too high no?) over an Oil pressure??

Anyways, people told me to get an oil pressure but I don't really get why? can you explain me the danger of having a too high oil pressure?

Thanks

P.S: I'm getting these gauges because I might start lapping this summer, if not It will be in 2 years but anyways I prefer the look of STRI gauges than the triple OEM gauge.

Oil Pessure is probley one of the most important things to watch if you wanna start lapping the track.

To make sure you are getting enough oil pumping as your engine and turbos rely heavily on it while thrashing it down the track.

Oil Pressure will only go up when you start up the car and revving it down the track.

From then on it varies, depending on the track, how fast you drive and how heavy you accelerator foot is.

It only goes down when the car is on idle.

(In my opinion) As for the gauges I recommend for track would be,

Oil Pressure gauge (As said above)

Oil Temp gauge (To check how hot your oil is getting, if its gets very hot, you best install an oil cooler to keep it at stable / lower temp so you engine and turbos perform smoother)

Water Temp gauge (To monitor and make sure the engine does not get too hot and over heat)

Boost gauge (To make sure you car is boosting at the level you want it to)

My water / oil temp usually sit at 70, sometimes upto 80 degrees, but slowly, unless you have a cooling problem (or when you get out of traffic and get some airflow the oil cooler may drop the temps).

Oil pressure changes with acceleration, so that's going to move quite a bit...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...