Jump to content
SAU Community

Recommended Posts

stock motor

r33 gtr with

nismo fuel pump

-7 garett's

wold ecu v400

stock dumps and 3inch turbo back exhaust

hks fmic

stock injectors @92% duty. couldnt go more

so final result was 254 rwk on 11psi

12.0 to 1 a/f ratio.

cant wait for some 600cc injectors and more boost :D

i think the car has done well . il try to upload dyno graph if i get my scanner workin :D

dynoed on 20 inch rims!

just thought id share

!

Edited by R33GOD

Thats on the money, there is a mate of mine with a 26 in his 180SX making 306rwkw with -7's with the same ECU and 740cc injectors, FMIC, full exhaust and fuel pump. He's doing this on 16psi so its definately in reach mate, very impressive

just out of curiosity.. should stock injectors be at 92% duty cycle at only 255kw ?? I thought they could take just over 300kw before they hit their ceiling ? Have you got a fuel pressure guage on there to check that your not dropping pressure high up in the rev range ?

my scanners busted man so a no go there. yeah im wrapped with the result. i just bought some siemens 570cc injectors. gonna put them in, in a few weeks and retune. Want to get used to this power for a couple of weeks before the real power kicks in.

by the way the 92% duty cycle is on standard rail pressure with stock reg .

Edited by R33GOD

Thats the same with my old combo, only thing i changed was to a Djetro, exhaust, FMIC, and 12psi with stock turbines on a 32 RB26 and it was doing 240rwkw at around 70%. In saying that 570's should get you out of trouble and on to 300kw, which will be a stack of fun on the street

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...