Jump to content
SAU Community

R32 Gtr Fuel Presure


Recommended Posts

what should the base fuel reg presure be at?

r32 gtr stock fuel reg....

i have a sard intank pump and have re wired the pump

i was told it can make it run richer and have a higher base fuel reg presure?

as i now have a miss......

Link to comment
Share on other sites

ran it on the dyno found the miss! small leak in one of the inj rubbers!!

fixed that, ran it again with stock fuel reg after re doing the fuel pump wires very rich! 10 afm was about 13 befor up top in the revs...

fitted the reg and backed the presure off and a little bit more boost now making 336rwkw on 17 18 psi

up from 285kw on this same dyno befor the fuel pump wires and reg still needs to be tuned again yet tho :blink:

Link to comment
Share on other sites

Just wondering, you found a small leak where? Are you talking about the injector insulators?

I miss the economy I had before I fixed everything, was getting almost 400k's to a tank, now lucky to make 200.. oh well. More fun now anyways.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Hello all, I would kindly ask if anyone had a Left Hand Side weather strip retainer (New Old Stock only please) available for the R34 GTR? Part number(s): 76871-AA101 / 76871-AA100 I have sourced the RHS but the LHS so far is proving elusive. I am based in the UK & will gladly pay shipping if someone has one available.  Many thanks
    • You can change the oil but I'd avoid full synthetic until you've done a few more km. Chrome or iron rings? If they're iron go for it they'll be fine, chome just a bit longer 
    • I hate to say it, but this isn't a 'great length' to steal a car. The people that steal high value cars are very used to stealing cars from garages. It really isn't a complicated process, a lot of people leave their keys in very typical places (think bowl/rack by the front door). You break into the house, grab the key and off you go. So what, in about 1 minutes time they have taken the car?  Probably goes without saying that most of these cars being pinched in this manner are the higher end Audi/AMG/etc. It's the same process though regardless of whatever the car is.  If you're worried about this, keep your car out of sight. If no one knows its in the garage, no one is coming for it. Other things include if you have an aftermarket ECU, change a setting so the car won't start even with the keys, setup CCTV cameras that ping your phone on activation etc.  If you think it's hard to break into a house to grab the keys first, just picture the fire fighters coming to recuse someone from a burning house. It's what, 10 seconds to gain entry if that? Locks only help honest people stay honest. 
    • Yes but when you buy that Nissan/Ryco filter it comes in a Nissan box labelled as Nissan. In this case it was in an Aisin box. A heads up would have been nice. If I had received it in an Exedy box I wouldn't have a problem if that's what Exedy supplied. I don't really care as long as it does the job as well as the Exedy did. 8 years of 300+rwkw with a fair bit of abuse. Time will tell as always. I have a swirl pot thingy, constantly self bleeding. If it is air in there it will sort itself out soon enough.
×
×
  • Create New...