Jump to content
SAU Community

Td06 20g Turbo Kit


Recommended Posts

i have a full td06 20g turbo kit for sale

comes with manifold turbo wastegate

all heat wrapped

i can also throw in a twin 2.5 inch zorst $700 completely legal and plumb back with twin cats!

this is all bolt on for a rb2530 in a r31 however will fit a rb20 or a rb25 in a r31 with very minor modifications

8.jpg

15.jpg

16.jpg

4enginebay.jpg

turbo is good for 250rwkw at 12psi

full bost on a rb2530 at 2k

in can and drivable if you need a test to swwe what it sounds like and goes like

Link to comment
Share on other sites

Is this Mark's old setup?

If so it is identical to my turbo setup as the turbo was originally meant for a drag GTR twin TD06-20G setup that was split up, i got one of the turbos, Mark the other. So will work real well on an RB20, 260rwkws at 18psi and makes that boost at about 4,200rpm but really sits you in your seat from 4,500rpm.

2k is a steal!

Link to comment
Share on other sites

yea marks old setup

it comes with the oil lines

has been on the car for about 2000 km and on marks car( same engine... i bought the whole engine) for another 1k

gate is the stock trust one

for an extra 700 comes with a custom twin 2.5 inch exhuast with twin cats and muffle ( fits a r31 obvioulsy)

or 200 exta a nd ill cop of the dump to under car and a decent length from the wastegate to get you cracking on your car

pete

0448468884

Link to comment
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Hello all, I would kindly ask if anyone had a Left Hand Side weather strip retainer (New Old Stock only please) available for the R34 GTR? Part number(s): 76871-AA101 / 76871-AA100 I have sourced the RHS but the LHS so far is proving elusive. I am based in the UK & will gladly pay shipping if someone has one available.  Many thanks
    • You can change the oil but I'd avoid full synthetic until you've done a few more km. Chrome or iron rings? If they're iron go for it they'll be fine, chome just a bit longer 
    • I hate to say it, but this isn't a 'great length' to steal a car. The people that steal high value cars are very used to stealing cars from garages. It really isn't a complicated process, a lot of people leave their keys in very typical places (think bowl/rack by the front door). You break into the house, grab the key and off you go. So what, in about 1 minutes time they have taken the car?  Probably goes without saying that most of these cars being pinched in this manner are the higher end Audi/AMG/etc. It's the same process though regardless of whatever the car is.  If you're worried about this, keep your car out of sight. If no one knows its in the garage, no one is coming for it. Other things include if you have an aftermarket ECU, change a setting so the car won't start even with the keys, setup CCTV cameras that ping your phone on activation etc.  If you think it's hard to break into a house to grab the keys first, just picture the fire fighters coming to recuse someone from a burning house. It's what, 10 seconds to gain entry if that? Locks only help honest people stay honest. 
    • Yes but when you buy that Nissan/Ryco filter it comes in a Nissan box labelled as Nissan. In this case it was in an Aisin box. A heads up would have been nice. If I had received it in an Exedy box I wouldn't have a problem if that's what Exedy supplied. I don't really care as long as it does the job as well as the Exedy did. 8 years of 300+rwkw with a fair bit of abuse. Time will tell as always. I have a swirl pot thingy, constantly self bleeding. If it is air in there it will sort itself out soon enough.
×
×
  • Create New...