Jump to content
SAU Community

Japanese Wholsale Spares Drift Series Round 6 Grand Final


Recommended Posts

hey guys the last round of the 08/09 drift series is on next sat may 2nd. hoping it to be a big one so invite every1 you kno and support your sport

i shall be debuting my 32 4 door now with rb25, will be the first tiem out since november last year so expecting a few gremlins and to be a lil rusty. hope to see you guys there anywayz.


Link to comment
Share on other sites

thanks rhys for waking up at 6am and taking my tyres to track, thanks to benson, scott, niksmo, and everyone who helped me out on the day,

be back next season making alot more noise,

even got a yellow sticker on way home :P

i told the cop all about my day drifitng but i dont think he cared

theres a few pics of me qualifying in dads s13/15, i got a flat front tyre in qualifying so had to use his












Link to comment
Share on other sites

This topic is now closed to further replies.

  • Latest Posts

    • world's fastest R33 with sunroof, A/C and sound deadening  
    • And lower chances of a divorce, hookers & coke much higher chance, a bit lower are strippers & coke.
    • Been slowly chipping away at it when I've got time. Tried to get the box in with the converter but worked out that the flexplate isn't the correct thickness and the converter pulls out off the pump too much (about 8mm). The flexplate for some reason was setup to use the secondary holes on the converter which had a press in nut to bolt to. I worked with Adamat performance the guys who manufacture the kits and they revised the design and made it suit the factory converter holes and milled up a new one for me and is currently on its way over. Can see the differences between the two compared to the orignal design which is in the post above. Once that's here the box can go in for good. I dummy'd it back up to get tailshaft length and is currently with Hardy Spicer to sort that out. Unfortunately won't get it back until late Jan Have been working in the boot lately getting it all a bit nicer and useable. Painted it with sound deadener and cut out a new boot floor from 18mm MDF so I can put a pram or my tool bag in the back. Have marine carpet coming to stick onto that and then also cut a piece to cover the battery. Once ive stuck the carpet in and all cleaned up ill pop the fuel system back in. Need to order 2 new Walbro 525s to replace the 3x 460s. Should be enough fuel for the new setup and run a bit cooler as well having more volume in the surge tank and less heat.  Have also ordered some sound deadener to put under the carpet. That should be here next week and I'll start putting it down on the floor, doors and roof. Hoping all this effort will make it a nice streeter with ability to daily if I want to.
    • It's only money. This arrived for mine yesterday 
  • Create New...