Jump to content
SAU Community

Paid Of 5 X 114.3 20mm Spacers

konect
 Share

Recommended Posts

konect Mentor

konect

Posted
Posted (edited)

Hey all,

Got some spacers off my ceffy that I no longer require.

They are a pair of 5 x 114.3 20mm spacers and are a dark blue colour.

Nothing crazy but $70 for the pair :)

I can be contacted via PM or 0412 033 449, parts are located in St Kilda East.

Thanks.

Edited by konect
Link to comment
https://www.sau.com.au/forums/topic/267910-paid-of-5-x-1143-20mm-spacers/
Share on other sites
Zurlox Collaborator

Zurlox

Posted
Posted
Hey all,

Got some spacers off my ceffy that I no longer require.

They are a pair of 5 x 114.3 20mm spacers and are a dark blue colour.

Nothing crazy but $70 for the pair :)

I can be contacted via PM or 0412 033 449, parts are located in St Kilda East.

Thanks.

would these fit on my r32gtst?

thanks,

sam

Mick Mentor

Mick

Posted
Posted

may i ask if you would need longer studs put in, bec i put 8mm spacers to clear the brakes on the front on my 19's and there didnt look like there was much stud to get the nuts on ..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 GTR running -9 with no tune

      By GTSBoy · Posted

      Only if you do not You will not be able to drive it with any serious load without risk of it pinging, which will either slowly or rapidly kill it, depending on how bad it is.
    • 677_GTR
      R33 GTR running -9 with no tune

      By 677_GTR · Posted

      Hi guys, I’m new to the GTR scene. Picked up an R33 GTR earlier this year that needs a lot of love. I’ve been going through the hot side, changing all the gaskets and while it was all off I managed to score a set of -9s. It still had the stock ceramics so I was pretty happy to get the 2860s.  I live in a small country in the pacific with 0 performance car scene. No dyno’s no performance parts, let alone stock parts for a skyline. I order everything from Australia and do it myself. This means I’ll be running the stock ECU. Maybe down the track I’ll get an aftermarket set up and do a remote tune.  Will the car run -9s on stock tune safely?  I have a very heavy foot so I really hope so 😂   thanks guys   
    • Duncan
      Leaking Rear Subframe Bushing?

      By Duncan · Posted

      perfect, no rush to address the leaking bush then, it's not doing much/anything
    • GTSBoy
      Does RB25DE Neo lower intake work with RB25DET Neo Upper intake manifold?

      By GTSBoy · Posted

      I'm not sure if it will bolt up, but.... I'm reasonably sure that the ID of the runners is somewhat smaller on the NAs. So it probably wouldn't be a good match at the flange where the top and bottom meet. So that would be a reason to not do it. And the skinny runners would be the bit you're keeping, which would be a reason to no do it. You'd want the big runners if you were doing any work to swap stuff. Why not just use what you've got, like nearly everyone else who has +T'd an NA? You don't need or want the TCS throttle or other stuff that is specifically DET inlet/crossover.
    • TurboTapin
      Leaking Rear Subframe Bushing?

      By TurboTapin · Posted

      lol already been put in temporarily 3 years ago
×
×
  • Create New...