Jump to content
SAU Community

Used Slide Turbo


Recommended Posts

3yrs old

18,000kms

needs oil line and requires an actuator

bolts onto standard water lines

checked over by Bill at ATS (marion rd, adelaide) and said to be in top notch condition

seals are said to be all good same goes for bearings and shaft play is near non existent

great for an RB20

good on an RB25

$500 pickup

$550 delivered Australia-wide

at4.jpg

at3.jpg

at1.jpg

at2.jpg

at5.jpg

Link to comment
Share on other sites

was on Stagea rb25 auto, stock injectors, safc/sitc/fmic/040 fuel pump/exhaust got 206rwkw

sliding performance listed these turbos at 250rwkw @ 1.1bar

definately no lag, was same as stock turbo but a hell of a lot more punch, and sounds pretty whooshy too

made a huge difference to the engine, this turbo is how the stock nissans should have been made.

stock water lines should be a M24 bolt so yes they will fit

oil line is a M17 bolt and I made a braided unit.

the stock one will fit BUT you'd have to derestrict the oil line slightly with a .8mm drill bit as this turbo needs more oil than the stock turbo

for sale is the turbo only, no lines no other bits. bolts onto rb20/25.

search around this site "sliding performance highflow turbo 2006" for pictures on the oil line modification

with manual gearbox, bigger injectors, power-fc & support mods Id say the turbo should pull 230-240rwkw

cheers

Link to comment
Share on other sites

great for an RB20

good on an RB25

Will be pretty damn great on a 25 too!

Wont be that laggy on a 20 and wont be laggy at all on a 25 and should be good for approx 250rwkw.

Would buy this for sure if i didnt find one a month or so ago.

GL with the sale mate, Very cheap!

Link to comment
Share on other sites

oil line is a M17 bolt and I made a braided unit.

the stock one will fit BUT you'd have to derestrict the oil line slightly with a .8mm drill bit as this turbo needs more oil than the stock turbo

ok so it comes with a braided oil line and that will fit in a rb20?

i dont no what you mean by drilling a hole? lol

Link to comment
Share on other sites

ok so it comes with a braided oil line and that will fit in a rb20?

i dont no what you mean by drilling a hole? lol

no for sale is the turbo only

you'll need to either use your stock oil line, a .8mm drill bit and open up the restrictor before bolting on (search sliding performance high flow turbo pics - http://www.skylinesaustralia.com/forums/Sl...formance+turbo)

or you'll need to purchased a new oil line

my oil line is buggered, trust me you dont want it..... its been bolted on/off/on/off a few times, & being far too tight its cracked. thrown away.

post-18854-1241247638_thumb.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • I hate to say it, but this isn't a 'great length' to steal a car. The people that steal high value cars are very used to stealing cars from garages. It really isn't a complicated process, a lot of people leave their keys in very typical places (think bowl/rack by the front door). You break into the house, grab the key and off you go. So what, in about 1 minutes time they have taken the car?  Probably goes without saying that most of these cars being pinched in this manner are the higher end Audi/AMG/etc. It's the same process though regardless of whatever the car is.  If you're worried about this, keep your car out of sight. If no one knows its in the garage, no one is coming for it. Other things include if you have an aftermarket ECU, change a setting so the car won't start even with the keys, setup CCTV cameras that ping your phone on activation etc.  If you think it's hard to break into a house to grab the keys first, just picture the fire fighters coming to recuse someone from a burning house. It's what, 10 seconds to gain entry if that? Locks only help honest people stay honest. 
    • Yes but when you buy that Nissan/Ryco filter it comes in a Nissan box labelled as Nissan. In this case it was in an Aisin box. A heads up would have been nice. If I had received it in an Exedy box I wouldn't have a problem if that's what Exedy supplied. I don't really care as long as it does the job as well as the Exedy did. 8 years of 300+rwkw with a fair bit of abuse. Time will tell as always. I have a swirl pot thingy, constantly self bleeding. If it is air in there it will sort itself out soon enough.
    • Being in South bris myself this concerns me that they went to these lengths.   Can I ask how hard is it to get to your garage? Like is it a garage at the front of the house close to the street, or you need to enter a fenced yard, and garage is out the back?
    • The question is, when you bled the coolant, did you do so with the heater tap fully opened and heater on? If you haven't, you may have an air bubble in the heater core, double check your coolant level and overflow bottle.
    • Yeah, but, it's like go and buy a Nissan filter. Nissan didn't make it, it's likely a Ryco etc.   You bought exedy, but "they didn't make" that specific part. Chances are, lots of actual exedy kits are, and have been, running aisin plates for ages.
×
×
  • Create New...