Jump to content
SAU Community

Getting Rid Of An Annoying Sound


Recommended Posts

Hey guys,

Has anyone tried to remove the annoying beeping noise when you leave the key in the ignition and open the driver's side door? Sometimes I like to clean the car with both doors open and the stereo on, but that beeping just annoys me.

any suggestions?

Thanks! :D

Link to comment
Share on other sites

Thanks guys,

but would that drain the battery quicker? :P

Yeah it does.So you'll have to clean quicker :yucky:

or just leave the car running for a bit while you clean

Link to comment
Share on other sites

Hey guys,

Has anyone tried to remove the annoying beeping noise when you leave the key in the ignition and open the driver's side door? Sometimes I like to clean the car with both doors open and the stereo on, but that beeping just annoys me.

any suggestions?

Thanks! :)

Thanks guys,

but would that drain the battery quicker? :P

dont put the key in...use ipod+good hifi for "stereo" for as long as you want and nothing to worry about battery too~ :P

Link to comment
Share on other sites

its a two pin brown plug under the shroud. bear in mind pulling it will cause a few things to act weird..

"weird"? So don't play around with it?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • And lower chances of a divorce, hookers & coke much higher chance, a bit lower are strippers & coke.
    • Been slowly chipping away at it when I've got time. Tried to get the box in with the converter but worked out that the flexplate isn't the correct thickness and the converter pulls out off the pump too much (about 8mm). The flexplate for some reason was setup to use the secondary holes on the converter which had a press in nut to bolt to. I worked with Adamat performance the guys who manufacture the kits and they revised the design and made it suit the factory converter holes and milled up a new one for me and is currently on its way over. Can see the differences between the two compared to the orignal design which is in the post above. Once that's here the box can go in for good. I dummy'd it back up to get tailshaft length and is currently with Hardy Spicer to sort that out. Unfortunately won't get it back until late Jan Have been working in the boot lately getting it all a bit nicer and useable. Painted it with sound deadener and cut out a new boot floor from 18mm MDF so I can put a pram or my tool bag in the back. Have marine carpet coming to stick onto that and then also cut a piece to cover the battery. Once ive stuck the carpet in and all cleaned up ill pop the fuel system back in. Need to order 2 new Walbro 525s to replace the 3x 460s. Should be enough fuel for the new setup and run a bit cooler as well having more volume in the surge tank and less heat.  Have also ordered some sound deadener to put under the carpet. That should be here next week and I'll start putting it down on the floor, doors and roof. Hoping all this effort will make it a nice streeter with ability to daily if I want to.
    • It's only money. This arrived for mine yesterday 
    • Unfortunately my car was stolen in the last few weeks while I was away. Car towed from garage in brisbane south. Wasn’t running and unregistered but good condition white 1994 series 1 r33 gts-t. Black 17inch kakimoto rims, fujitsubo ti exhaust, gtr drivers seat, hybrid fmic, standard body with m spec front bar.  reward for information that leads to recovery.    thanks
×
×
  • Create New...