Jump to content
SAU Community

Recommended Posts

Hi everyone,

I've had to start a new profile because i forgot my password & the email i used for my registration has now been closed...

Note: i have searched but nothing specific enough was found.

I recently (November 08) imported a 98' R33 GTR from Japan myself. Car is in perfect condition & usually runs perfect...usually. I'm not new to imports, ive had a TT supra, SR 180sx, 2x R33 Gts-t's etc over the last 6 years so i know the usual things to check.

So, like i said, the car runs great most of the time, but sometimes it just runs bad all of the sudden. It's like the car wont rev but the turbo's still spool & make boost (currently set to 14psi via EBC) the exhaust note also gets louder, sort of sounds like its is blocked off. When this happens i pretty much have NO power and the fuel smell in the cabin gets worse & car also back fires alot. the car does NOT misfire, this is not a coil/fuel pump/spark plug etc issue, all of that has been checked.

I then thought this could be an air flow meter problem until i checked them and noticed they were like new, i even opened them up to check the solder on the connectors and they were perfect.

Me and my mechanic have been over the car several times for vaccum leaks but there isn't any.

I know the car is running very very rich because it is getting between 250-300km from a tank so it does need to be dyno'd but i was just seeing if anyone on here has had any similar issues??

I just find it very strange because it is so variable.. it doesnt matter if its hot or cold or a long drive or short, it can just happen at any time but when it is running good its like a brand new car??

The car has had some significant mods in japan, most of which were removed including the full cage, turbo's but the cams remain (not sure what else has been changed internally) and the aftermarket ecu was removed and replaced with a stock item so i'm not sure if this is contributing to it.

Any help would be greatly appreciated.

Thank You.

James

Link to comment
https://www.sau.com.au/forums/topic/269921-onoff-running-issues-r33-gtr/
Share on other sites

Since it's had significant mods done to it, I'm guessing it has aftermarket bigger injectors.. genuine GTR injectors (from the R32 GTR at least) are black and yellow. I would check if you have indeed have aftermarket injectors, look into getting an aftermarket computer like say the PFC or the cheaper Nistune option (you will need to research it, as I believe you need a R32 GTR ecu to run the Nistune setup as I haven't heard of anyone using running Nistune on a 33 GTR ecu) where you can set the correct injector size.

Since it's had significant mods done to it, I'm guessing it has aftermarket bigger injectors.. genuine GTR injectors (from the R32 GTR at least) are black and yellow. I would check if you have indeed have aftermarket injectors, look into getting an aftermarket computer like say the PFC or the cheaper Nistune option (you will need to research it, as I believe you need a R32 GTR ecu to run the Nistune setup as I haven't heard of anyone using running Nistune on a 33 GTR ecu) where you can set the correct injector size.

Hi, i thought bout this but the compliance workshop reckons the injectors are standard but i think it might be worth checking, cheers.

coolant temp sensor will keep the car running in the cold map = rich and will also from revving out too much

(on my 32 gtst it limits revs to about 4-5k prm when not fully warm)

i am also experiencing similar problems with it but been too slack to change the sensor (dam uni work :D )

so i would give that a go, the tend not to like working after ~15 years of abuse lol

  • 5 months later...

Im not sure if you've managed to solve this problem yet, but it sounds like your igniter/coil packs could be on the way out.

My R32 GTS-T did a similar thing, i would be driving along, accelerate & the noise would increase, boost would build, but power just wasnt there, & you could feel the power dropping off as if there is no fuel there or something. Changed my igniter, & the coil packs for a set of split fires, & suddenly no more dramas. My car actually feels to get more top end grunt over 5000rpm, where as before it was dropping off from 5000rpm upwards.

Mine was only doing it on long drives where it was up at operating temp for half hour plus, but your igniter could be the problem here....hope this helps.

  • 10 months later...

Hey Mate,

Did you ever get this problem sorted.... I have an issue with my GTR which sounds exactly the same as what you were having and i was hoping that maybe what fixed yours will fix mine.......

Any help would be great

Thanks

Michael

Hi everyone,

I've had to start a new profile because i forgot my password & the email i used for my registration has now been closed...

Note: i have searched but nothing specific enough was found.

I recently (November 08) imported a 98' R33 GTR from Japan myself. Car is in perfect condition & usually runs perfect...usually. I'm not new to imports, ive had a TT supra, SR 180sx, 2x R33 Gts-t's etc over the last 6 years so i know the usual things to check.

So, like i said, the car runs great most of the time, but sometimes it just runs bad all of the sudden. It's like the car wont rev but the turbo's still spool & make boost (currently set to 14psi via EBC) the exhaust note also gets louder, sort of sounds like its is blocked off. When this happens i pretty much have NO power and the fuel smell in the cabin gets worse & car also back fires alot. the car does NOT misfire, this is not a coil/fuel pump/spark plug etc issue, all of that has been checked.

I then thought this could be an air flow meter problem until i checked them and noticed they were like new, i even opened them up to check the solder on the connectors and they were perfect.

Me and my mechanic have been over the car several times for vaccum leaks but there isn't any.

I know the car is running very very rich because it is getting between 250-300km from a tank so it does need to be dyno'd but i was just seeing if anyone on here has had any similar issues??

I just find it very strange because it is so variable.. it doesnt matter if its hot or cold or a long drive or short, it can just happen at any time but when it is running good its like a brand new car??

The car has had some significant mods in japan, most of which were removed including the full cage, turbo's but the cams remain (not sure what else has been changed internally) and the aftermarket ecu was removed and replaced with a stock item so i'm not sure if this is contributing to it.

Any help would be greatly appreciated.

Thank You.

James

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...