Jump to content
SAU Community

Z32 Airflow Meter

jonny8ball
 Share

Recommended Posts

jonny8ball Collaborator

jonny8ball

Posted
Posted

Hi guys ive a new z32 to fit to my 97 rs4 but cant seem to find the wiring info to change it over from the 3 wire stock plug to the 4 wire z32 plug. Can anyone who has done this help me out with the info please.

Link to comment
https://www.sau.com.au/forums/topic/271339-z32-airflow-meter/
Share on other sites
KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

I find the search function on SAU difficult but got this:

"the z32 will not run on the stock ecu so dont bother

but when it comes time to wire it up you join the ground wires

ie on the Z32 there are two ground wires one is for signal ground and the other is just ground

on the R33 S2 loom you have one ground wire, so you just join them all together

but dont try it with the stock ecu - it no worky and will run like a whore"

I don't remember if you have an aftermarket ecu yet but maybe an SAFC will suffice. I will be getting a Z32 afm soon and hopefully my chipped ecu will run it OK. Did you get a brand new one (and if you don't mind) from where and how much?

jonny8ball Collaborator

jonny8ball

Posted
  • Author
Posted
I find the search function on SAU difficult but got this:

"the z32 will not run on the stock ecu so dont bother

but when it comes time to wire it up you join the ground wires

ie on the Z32 there are two ground wires one is for signal ground and the other is just ground

on the R33 S2 loom you have one ground wire, so you just join them all together

but dont try it with the stock ecu - it no worky and will run like a whore"

I don't remember if you have an aftermarket ecu yet but maybe an SAFC will suffice. I will be getting a Z32 afm soon and hopefully my chipped ecu will run it OK. Did you get a brand new one (and if you don't mind) from where and how much?

Im running a greddy emange ultimate so im sure once its fully mapped the standard airflow will need replaced with the z32 one. The one i have i purchased from nissan japan i cant remember how much it was but it wasnt cheap oem parts from japan usally aint!

Sorry but Im still unsure as to how to wire it up. My stageas loom that goes to the airflow has 3 wires 1 signal? 1 signal ground? and then 1 ground? yes?

My z32 has 4 1 signal? 2 signal ground and 1 ground yes?

Do i take the 2 signal grounds and just connect both to the stagea signal ground?

darrinspencer Grand Master

darrinspencer

Posted
Posted
Im running a greddy emange ultimate so im sure once its fully mapped the standard airflow will need replaced with the z32 one. The one i have i purchased from nissan japan i cant remember how much it was but it wasnt cheap oem parts from japan usally aint!

Sorry but Im still unsure as to how to wire it up. My stageas loom that goes to the airflow has 3 wires 1 signal? 1 signal ground? and then 1 ground? yes?

My z32 has 4 1 signal? 2 signal ground and 1 ground yes?

Do i take the 2 signal grounds and just connect both to the stagea signal ground?

Try this

Use the series R33 install

Iused this on my series stagea and worked fine

http://www.skylinesaustralia.com/forums/Fi...;hl=z32+install

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 677_GTR
      R33 GTR running -9 with no tune

      By 677_GTR · Posted

      Hi guys, I’m new to the GTR scene. Picked up an R33 GTR earlier this year that needs a lot of love. I’ve been going through the hot side, changing all the gaskets and while it was all off I managed to score a set of -9s. It still had the stock ceramics so I was pretty happy to get the 2860s.  I live in a small country in the pacific with 0 performance car scene. No dyno’s no performance parts, let alone stock parts for a skyline. I order everything from Australia and do it myself. This means I’ll be running the stock ECU. Maybe down the track I’ll get an aftermarket set up and do a remote tune.  Will the car run -9s on stock tune safely?  I have a very heavy foot so I really hope so 😂   thanks guys   
    • Duncan
      Leaking Rear Subframe Bushing?

      By Duncan · Posted

      perfect, no rush to address the leaking bush then, it's not doing much/anything
    • GTSBoy
      Does RB25DE Neo lower intake work with RB25DET Neo Upper intake manifold?

      By GTSBoy · Posted

      I'm not sure if it will bolt up, but.... I'm reasonably sure that the ID of the runners is somewhat smaller on the NAs. So it probably wouldn't be a good match at the flange where the top and bottom meet. So that would be a reason to not do it. And the skinny runners would be the bit you're keeping, which would be a reason to no do it. You'd want the big runners if you were doing any work to swap stuff. Why not just use what you've got, like nearly everyone else who has +T'd an NA? You don't need or want the TCS throttle or other stuff that is specifically DET inlet/crossover.
    • TurboTapin
      Leaking Rear Subframe Bushing?

      By TurboTapin · Posted

      lol already been put in temporarily 3 years ago
    • nouveau_poor
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By nouveau_poor · Posted

      Makes sense. For actuators, if the pressure itself isn't adjustable, that would mean I'd need to think about 2 different actuators with 2 different pressures on paper in order for them to work at the same time if the turbos behave differently. So measure the difference in psi needed to move both, and then get an actuator to match that difference. Assuming I cant get rid of it by adjusting the arms.  You're exactly right, never happens in gear 1 or 2. I can occasionally get it in gear 3 if going uphill but its very small. Only ever in 4 and 5. Seems kind of backwards that one of the points of VCAM is faster spool but if it introduces shuffle then it actually slows spool down. 
×
×
  • Create New...