Jump to content
SAU Community

Sa:--: R31, R30, Volvo, B&m, Audioline, Amp's, Sumitomo, Springs,


hall sales
 Share

Recommended Posts

Items in SA

14X7 5 stud rims 0off with 215-65 tyres to suit torana/volvo or similar stud pattern $200

R31 left and right 28 spline axels $20 each

L24E engine and auto trans + pump 170,000 $150

R30 170k import dash cluster $50

2X 225-50-R16 bridgestone G3 tyres with 60% even no camber use $50

2X 225-50-R16 falken semi slicks 40% even $50

CA18det stainless exhaust mani to suit external gate, perfect cond (going back to internal) $200

R30 low King springs (rears have had coils removes) and after market Munroe shock absorbers (under 5k use) $150

-1X B&M line locker for not destroying your brakes whilst spinning the rear wheels. $160 installed and rear brakes bled

-R31 S3 tinted front indicators from front of this $20ono, $30 posted

-JDM BLAZE universal alloy gearknob. baller knob. $60ono, $70 posted

-audioline 6.5" split system 120W rms $150. cost $260 in mid 08' (blue kevlar cone)

-Full wiring kit for amp with all wires $15

-Pioneer Sub and pioneer compact box unsure of model 250wrms or over $75

-response amp. 2X150wrms. only works in bridged mode $100 . (or 15" sub n amp for $180)

-Some 2way amp, around 350wrms bridged (160wrms per channel normal) $60

pair of rims with sumitomo tyres @ 70% 15X7 +20 clear r32 brakes easy. stealth as, or just remove paint with wax and grease remover to restore them. $350

P1090218.jpg

-pioneer 2way 6inch $35

/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

-Also can do 2.5" and 3" mandrel bent exhaust systems now as i have thrown 2k at a mig welder. 4" exhausts also possible as im doing one on my pintara. Price dependant on car but for 2.5" mandrel bent it will be approx (150-250 - pending design) no mufflers with 2 flanges. (cat/extractors back)

also doing turbo back with separate screamers, etc

doing intercooler piping in mild steel aswell. pm for quotes. design dependant on what owner wants.

Edited by hall sales
Link to comment
Share on other sites

Items in SA

14X7 5 stud rims 0off with 215-65 tyres @ 80% even to suit torana/volvo or similar stud pattern $200

P1090930.jpg

R31 left and right 28 spline axels $20 each

P1090921.jpg

L24E engine and auto trans + pump 170,000 $150

P1090923.jpg

R30 170,000k dash cluster $50

P1090897.jpg

2X 225-50-R16 bridgestone G3 tyres with 60% even no camber use $50

2X 225-50-R16 falken semi slicks 40% even $50

CA18det stainless exhaust mani to suit external gate, perfect cond (going back to internal) $200

P1090850.jpg

R30 low King springs front + pedders rear and after market Munroe shock absorbers (under 5k use) $150. (only 1 rear in pic)

P1090929.jpg

-1X B&M line locker for not destroying your brakes whilst spinning the rear wheels. $160 installed and rear brakes bled

-R31 S3 tinted front indicators from front of this $20ono, $30 posted

-JDM BLAZE universal alloy gearknob. baller knob. $60 posted

-audioline 6.5" split system 120W rms $150. cost $260 in mid 08' (blue kevlar cone)

P1090936.jpg

Whiteline Nissan bluebird 910 aftermarket front swaybar with linkages and bushes

$150

P1090954.jpg

-Full wiring kit for amp with all wires $15

-Pioneer Sub and pioneer compact box unsure of model 250wrms or over $75

P1090960.jpg

-response amp. 2X150wrms. only works in bridged mode $100 . (or 15" sub n amp for $180)

P1090937.jpg

-Some 2way amp, around 350wrms bridged (160wrms per channel normal) $60

P1090963.jpg

pair of rims with sumitomo 195-50-R15 tyres @ 70% 15X7 +20 clear r32 brakes easy. stealth as, or just remove paint with wax and grease remover to restore them. $350

P1090218.jpg

-pioneer 2way 6inch $35

P1090933.jpg

-Greddy catch can with oversized fittings and drain arrangement. $75

P1090957.jpg

R31 skyline/pintara with RB20 turbo back 3" mandrill bent Exhaust with muffler or side pipe option in stainless steel. System finishes before the differential. Muffler is Lukey race stainless series

P1090951.jpg

P1090945.jpg

P1090949.jpg

$350

/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

-Also can do 2.5" and 3" mandrel bent exhaust systems now as i have thrown 2k at a mig welder. 4" exhausts also possible as im doing one on my pintara. Price dependant on car but for 2.5" mandrel bent it will be approx (150-250 - pending design) no mufflers with 2 flanges. (cat/extractors back)

eg.

P1090928.jpg

also doing turbo back with separate screamers, etc

doing intercooler piping in mild steel aswell. pm for quotes. design dependant on what owner wants.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Latest Posts

    • Hello,new to the group, I bought a R32 from auction recently, wondering if anyone knows the cars history, seems to have the usual go fast bits on it, plan is to do an engine swap- add 2 extra cylinders and 1 extra turbo. https://www.dropbox.com/scl/fi/i4rjmlzubjbwjtguh6f4s/IMG20241011140744.jpg?rlkey=q0lumm251377vknbqktfwrycq&st=7scvwx4e&dl=0 https://www.dropbox.com/scl/fi/ro24qmwzlczzlfsr4y05x/Screenshot_2024-10-10-10-49-23-90_9a2f5bb2149dae94cd1e190effc09b33.jpg?rlkey=oyguh26ttshlf04ccp48odf4v&st=xloae97b&dl=0   New to forums and posting pics, if links don't work, take it easy on me, 42yrs old and I tune carburettors!!  
    • As far as I know, Infiniti stopped importing vehicles before 2020, even though they were still selling their stock for at least a year or 2 after that, they were older build years, therefore, you can import a 2020 400R, because you couldn't buy an AuDM 2020 built Q50 RS. As for insurance, you might need to go through one of the enthusiast insurance companies, they tend to insure a lot more grey import models than the mainstream insurers as Duncan mentioned.
    • loved seeing the zenvo on the a1 just after the hatfield tunnel i was the guy in the white van trying to egg you on it sounded awesome and those exhausts glowing red inside insane cheers for the thumbs up tim and tom.
    • So.... when I'm finally getting around to having my power steering leak sorted, now it looks like I've got the same issue most A/T Skylines are having. My A/T light will randomly come on and I'm stuck in 3rd gear until I turn the car off and on again. Only 3 weeks ago I did a complete transmission service: Oil flush + new gasket + new filter. This came out of nowhere!! It wasn't like the car was driven hard. I drove about 3 mins down the road to get fuel and boom!!!  Anyway, I have a few questions and hope you fine people can help me out here. All questions are in red. 1. The solenoids: I was looking at the parts catalogue in Amayama and I could only find the Solenoids as an assembly. https://www.amayama.com/en/part/nissan/319404ax05 I read in another thread that Solenoid A = 31940-4AX02 & Solenoid B = 31940-4AX05 but the Amayama product has only the code of B. Is this the right part? Can anyone who has done the Solenoid changes or seen them confirm if this is the complete set of A & B?   2. Gasket and Filter: I'm not going to try change the solenoids myself because it seems difficult to do in a home garage with just 2 jack stands. I plan to take it to a shop and get it changed. I was also going to buy the transmission sump gasket at the same time so I don't reuse the same gasket. Should I just use the existing gasket as it has only been on the car since OCT 19th? (~3 weeks) Should I be buying a brand-new gasket and a filter? Does this job involve taking the filter out?   Thanks in advance to everyone. It's hard to find a video of someone doing a solenoid change on a R34 so any help you can give answering my remaining questions would make me less stressed.
    • Yea - From what I have seen from the video, the car idles like any R34 lol 50PSI of fuel pressure is hardly super abnormal, the regulator is working because the pressure remains static when the throttle gets revved, i.e pressure remains the same when manifold vaccuum changes. Bigger pumps on stock rails always bumped the pressure in the rail without using an aftermarket regulator to change that. Do you know what your IAC is actually doing? Has there been any data showing the stepper motor % etc? There's no way your idle is actually moving around the way the cluster(s) are indicating. You would hear the difference with the engine RPM flying to 3k and 1k in mere seconds. I'd be checking the wiring to the tacho. What the tacho is telling you and what the engine/ecu is telling you are different things. I assume your ECU doesn't display the spike. So whatever is telling the tacho to be at X rpm is doing something weird. When the going gets insane, you're on the wrong path. You've ruled out plenty of things that are working correctly/aren't the issue. Your idle isn't doing what the tacho is indicating. You have two seperate issues, I don't think they are linked, and the idle seems reasonably okay unless it's stalling which.. well, it hasn't. Troubleshoot the stall if it occurs by figuring out what your IAC is doing vs what it is being told to do.
×
×
  • Create New...