Jump to content
SAU Community

Recommended Posts

hey guys

well a little while ago my speedo just stopped working . so i searched on the forums and found something about the speedo cable snapping hence why hicas light turns on and i lose power steering after a couple minutes of driving.

today i changed the speedo cable over and nothing was wrong with the old one . so if anyone has any idea's on what could be wrong any help would be appreciated

thanks rory :)

Link to comment
https://www.sau.com.au/forums/topic/275218-no-speedo/
Share on other sites

was the apexi rsm installed recently?

check the speedo wiring near the ecu, maybe that has a short somewhere there.

i know when i installed my rsm. i forgot to tape up the speedo wire. so when i turn corners the ecu would move, making the wire ground itself to the body and the steering would go heavy.

Link to comment
https://www.sau.com.au/forums/topic/275218-no-speedo/#findComment-4663551
Share on other sites

was the apexi rsm installed recently?

check the speedo wiring near the ecu, maybe that has a short somewhere there.

i know when i installed my rsm. i forgot to tape up the speedo wire. so when i turn corners the ecu would move, making the wire ground itself to the body and the steering would go heavy.

32's use a cable driven speedo, and i think the ecu gets a electronic signal off the back of the speedo.. so if the RSM was shorting out, it shouldn't stop the speedo from working.

Link to comment
https://www.sau.com.au/forums/topic/275218-no-speedo/#findComment-4665251
Share on other sites

hey guys

well a little while ago my speedo just stopped working . so i searched on the forums and found something about the speedo cable snapping hence why hicas light turns on and i lose power steering after a couple minutes of driving.

today i changed the speedo cable over and nothing was wrong with the old one . so if anyone has any idea's on what could be wrong any help would be appreciated

thanks rory :D

Well, you will be happy to know that I am experiencing the EXACT same problem, Hicas light, no Power steering, No Speedo.

Im not sure what ties them all together but this is the second day this has happened, Im at work at the moment but im going to try to see if the speedo works up untill I get the hicas light on.

Link to comment
https://www.sau.com.au/forums/topic/275218-no-speedo/#findComment-4665616
Share on other sites

Well, you will be happy to know that I am experiencing the EXACT same problem, Hicas light, no Power steering, No Speedo.

Im not sure what ties them all together but this is the second day this has happened, Im at work at the moment but im going to try to see if the speedo works up untill I get the hicas light on.

hicas and power steering are speed sensitive, so no speedo reading gives you hicas errors and heavy steering.

Link to comment
https://www.sau.com.au/forums/topic/275218-no-speedo/#findComment-4665629
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...