Jump to content
SAU Community

Rb30E Into 32 Gt-R

Overnight Parts From Japan

By Overnight Parts From Japan,
in Victoria

 Share

Recommended Posts

Overnight Parts From Japan Apprentice

Overnight Parts From Japan

Posted
Posted

Hey guys, need help sourcing knowledge and literature on a pretty out there conversion project.

Seeing as the design of the RB30E SOHC head is so well suited for all sorts of motorsport, I am looking at converting my 32 gt-r to this configuration.

RB30E head, on RB26 Bottom end.

This way I dont have to run any of those silly 4WD adaptors and then still get the main benefit of a RB30 over an RB26, which is its fantastic head design.

Thanks guys :)

Link to comment
https://www.sau.com.au/forums/topic/359523-rb30e-into-32-gt-r/
Share on other sites
wedge_r34gtr Mentor

wedge_r34gtr

Posted
Posted (edited)

ROFL. Seriously I have tears in my eyes.

Sorry to bring this topic back to the top. After reading this and some of this guys other post i beleive he is dead serious.

I hope everyone reads this and laughs as hard as I did.

Edited by wedge_r34gtr
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      What Duncan said sounds right. Also, it looks like they only have the driver's mat. Not the rest. Because looking at the diagram: KG4911 is just the mat for the driver. KG4900 is the full set if I'm not mistaken and discontinued.   But, it looks like they may still have the full set for the manual S2. Might be worth checking for the other models as well as they seem slightly different. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/misc/G49 Man, I'm tempted.
    • GTSBoy
      WGNC34 - floor mats

      By GTSBoy · Posted

      I dunno about that as a blanket statement. Pitwork is Nissan's "Nissan genuine" thing, and for stuff like timing belts, I have found them to be excellent. Of course, for things like oil filters, you always use proper trusted brands anyway, not whatever the OEM has taken to using.
    • MBS206
      R34 Skyline climate control unit transistor

      By MBS206 · Posted

      Ahhhh... If you were putting 12V to the led in there, that's likely made it very unhappy. Chances are how you put power, was 12V across an LED that's meant to only have about 20mA through it at peak, and a forward voltage of about 1.8 to 2.4 volts. That circuit is likely only a 3V3 circuit, and will have a resistor in series with the led too. That's my guesstimate on that light, without having touched one.
    • Murray_Calavera
      Tein Circuit Master- rebuild worth it?

      By Murray_Calavera · Posted

      Another vote for installing them and see how you go.  I mean, you already own them, why would you not fit them? 
×
×
  • Create New...