Jump to content
SAU Community

Recommended Posts

1: R32/33 GTR Power FC with Apexi Boost control Kit USED

$1000

2:Autobahn 88 R32 R33 R34 GTR Alloy Intake piping kit. Comes with 4 extra silicone hoses which are an inch longer. A silicone hose to replace the rubber hose that joins the 2 turbo outlet pipes and 16 T Bolt heavy duty hose clamps. The hoses come from Plazmaman so they are the good stuff. NEW and UNUSED

$250

3: PWR radiator to suit R32 GTR. Not sure what else it fits. Was only used to start the car up with while my other radiator is away. The end tanks are 70mm thick and the core is 57mm thick. Has the mounts for the standard shroud, fits in the standard location with the standard parts. GOOD AS NEW

$500

4: R32 GTR standard unslotted DBA 4000 series rotors, front and rear NEW

$700

5: GReddy PRofec B-specII electronic boost controller (black colour)

Used once then removed to return the car back to standard. AAll that is needed is some rubber hose and a plastic T piece which you can get from Supercheap Auto.

$300

Can post the items at the buyers expense. Will also do pickup (Quakers Hill, Sydney) or arrange to meet somewhere.

Everything is negotiable, just don't bother with low ball offers.

Josh

post-8140-0-87931100-1301704096_thumb.jpg

post-8140-0-47378900-1301704411_thumb.jpg

post-8140-0-84627900-1301704531_thumb.jpg

post-8140-0-25970900-1301704620_thumb.jpg

post-8140-0-39622900-1301704630_thumb.jpg

Edited by dontfeelcold
Link to comment
https://www.sau.com.au/forums/topic/359533-skyline-bits-and-pieces/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...