Jump to content
SAU Community

Rb26 High Mount Single Turbo Kit

Weapon
 Share

Recommended Posts

Weapon Mentor

Weapon

Posted
Posted (edited)

Hi all, time has come to change up my set up as the entire engine package is getting revised including turbo system.

Up for grabs is:

1x GARRETT GT3582R 0.82ex ( Rear Housing HPC Coated Black)

1x Tial 44mm External Wastegate 1bar spring ( Body of Wastegate HPC Coated)

1x ETM (Extreme Turbo Manifolds) Steam Pipe Exhaust Manifold ( HPC Coated Black also)

1x Stainless 3inch Dump and Front Pipe with two O2 sensor ports

1x Complete Oil and Water line Kit to suit (all braid and speedflow)

1x High Polished 4in intake pipe with filter

1x New Nissan RB26 Exhaust Manifold Gasket in packaging still

Please note that the compressor housing is polished aswell . All HPC coating was done by Craved Coatings. Turbo kit has done approximately 15000km. This set up is extremely responsive and the manifold is a wonderful bit of gear.

This is a complete kit, the only thing that will need doing is the hot side pipe. The compressor housing also has an ally elbow welded on already so this is also handled. This kit will suit either R32 or R33 GTR.

Item Located in Townsville QLD 4818. I do apologise for not having any pics, i cannot get them off my iphone onto my shit PC. If genuinely interested please txt me and will be more than happy to forward pics and even video of turbo kit.

Asking $2900 + freight.

Best to email [email protected] or txt me on 0438840407

No time wasters please, this is a good price for a great kit :)

Cheers Marty

Edited by Weapon
Link to comment
https://www.sau.com.au/forums/topic/361002-rb26-high-mount-single-turbo-kit/
Share on other sites
  • 6 months later...
  • 6 months later...
Weapon Mentor

Weapon

Posted
  • Author
Posted

Hey guys sorry to bring through the bad news however this kit has been sold for quite some time.

The kit was exchanged for another kit with a cash difference. That kit has since made way for another kit now on my GTR lol

Thread needs to be closed.

Cheers Marty

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
    • TurboTapin
      Most women will agree that parking is the most taxing part of driving

      By TurboTapin · Posted

      What a time to be alive!!
×
×
  • Create New...