R32 Sedan Track Car With Rb26Dett

[Tangles]

Sad sale of my Toy that I havent been able to use as yet.

300kms since engine rebuild; will run a cple hundred more and have the Ecu tuned.

Spent in excess of $25,000 using mostly new parts throughout.

Regretful sale due to Divorce asset split arangement. No tyre kickers, No test drives without deposit, No low ballers

Most items below are New

Forgotten plenty of other parts - all work carried out by Boostworx

Sold as Track/Race car without registration

Previous registered in VIC, #SQD-128

$15,000 is the sale price

May 1993 Nissan Skyline GTs-T Rwd 4door grey sedan with Blitz fibreglass bonnet & GTR rear wing

RB30 VL-turbo 5speed manual rebuilt gearbox with single button clutch

GTR RB26DETT 300-km old fresh rebuilt engine with freshly rebuilt steel wheel turbos

Intake & Exhaust

600x400x100mm FMIC kit, stock BOV setup

Greddy-copy hardpipe intake kit, twin pod filters

Z32 AirFlow meters

Twin HKS split dump pipes

OBX tuned-length manifolds

OBX flex front pipe into 3" resonator decat pipe

5Zigen 3" turbo back exhaust

Fuel System

GTR intank fuel pump

550cc Siemen Denso Injectors, new O-rings, seals

Fuel pressure regulator, adjustable

Walbro 305LPH external fuel pump

4 litre fuel surge tank, 5m braided lines, speedflow fittings

Rebuilt Engine

ASI 52mm dual core alloy radiator, Blitz cap

Yellow Jacket coil packs

Greddy oil filter

Ryco fuel filter

Champion Gold sparkplugs

JC-Project radiator silicone pipes

ATI 600hp Harmonic balancer damper & pulley kit

N1 water pump

HKS oil pump

Tomei oil baffle sump plate kit

Tomei oil gallery orifice

Turbotech manual boost controller

1L Oil catch can

Oil filter relocation kit with speeflow fittings

Oil cooler finned 30-row unit, speedflow fittings

ARP Head stud kit

Cometic Street Pro 87mm MLS head gasket

Nissan full gasket set

HKS step-2 valve springs

Greddy N1 Street Special camshafts, R32 CAS

Greddy timing belt

Precision adjustable intake & exhaust cam gears

Drive key, tensioner & idler bearing kit

87mm CP Piston kit

Power–FC & Hand Controller

Suspension, Brakes & Wheels

Greddy engine strut tower brace & custom boot strut brace

High-Temp racing brake fluid

Braided front & rear brake lines

Wilwood 4-piston Superlight front brake calipers

Brembo 324mm drilled discs, bracket adapter kit

Stagea rear brake calipers & discs

Coilover adjustable suspension

Nismo front tension rod link set

17 x 8 inch mags

235/45/17 Kuhmo KU36 semi-slick tyres

Interior

Autometre boost gauge

Saas gear knob

Saas steering wheel & boss kit, spare R34 steering wheel

Bride low drivers seat rail

Bride drivers bucket race seat

Bride low passengers seat rail

R32 passenger seat

4-point harnesses

4-point Roll cage, bolt in

M's turbo timer

Power metre gauge

EBCR exhaust gas temperature gauge

AEM wideband sensor gauge kit

[rb2534]

Hey is that R34 wheel a manual one? If so would you sell it seperately? if so PM me

Thanks

[Tangles]

Sorry its an auto tiptronic R34 wheel. Got it for a spare as the current wheel is on a quick release mechanism.

Had an enquiry yesterday regarding selling the car.

Going to put a 3day permit on it tomorrow and get a few hundred more kms onto the fresh rebuild so that it is ready for the P-Fc tune.

The engine build would be good for 350kw with some 2860-5's, however with the current steel-wheel stock turbos It probably wouldnt crack 300rwkw

Turbos would be the only let-down in terms of outright power, but then again the car has been built for Malalla so response was more important over topend power.

Also, the cams are from R34 GTR therefore the CAS is an R34 item, not R32 as mentioned above.

Battery is boot-mounted, engine has a 1L catchcan, and pretty much everything is brand new.

[Tangles]

Oops, posted in wrong section.

sorry

Please Lock Thread

Proper thread in correct sub-forum here : http://www.skylinesaustralia.com/forums/topic/378979-r32-sedan-trackcar-with-fresh-rb26dett/