Jump to content
SAU Community

Shannons Supercar Showdown


Recommended Posts

Supercar Showdown is back!

After a very successful first year, which included overseas awards and recognition, 7mate are proud to announce that the Shannons Supercar Showdown is back for another action-packed season of motorsport!

Last year’s winner, 17 year old Cameron Waters, became the youngest driver to ever attend the ‘Great Race’ AKA the Bathurst 1000. Waters piloted the Shannons Mars racing car with vigor, but sadly retired from the race. A great moment during the race was when Waters over steered heavily on exit, looping his V8 Supercar but managing to recover it with incredibly fast counter steering. Here’s a clip of the hairy moment.

The prize on offer this year is a huge one – the chance to drive a Kelly Racing V8 supercar at the historic 50th anniversary of the Bathurst 1000. The diverse choice of competitors for the second season will make this show even better than last year. They start from as young as 16, have travelled from all over the globe (from as far as Texas!) and cover both genders. The competition levels this year are going to be high.

There is a lot at stake, whether it is pride or the simple fact of winning the chance to be a part of an event that will go down in Australian Motorsport History! Dwindling down the competitors this year will be done via set tasks that each person will attempt. Simple challenges, such as re-sitting your driving test, have been thrown into the mix to make things a little bit interesting. Of course, there will be plenty of skidpan action and fast paced stuff to keep us budding motoring enthusiasts entertained.

But it’s not all about the drivers. YOU can get involved this year and doing so will put you into the running to win a Renault Megane RS250 Cup Challenge valued at $42,000 courtesy of Shannons and Renault. Click HERE to visit the homepage where you can enter the competition, read the competitors bios and catch up on previous episodes of the show you may have missed.

So who’s going to win and get to pilot the Kelly Racing V8 car this year? There’s only one way to find out. Catch the show on 7MATE at 1PM Saturday.

Catch the first episode here!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Latest Posts

    • Time for millspec wiring, MoTec electronics package, Bosch Motorsport ABS, let's goooooooo!!!   Maybe as @MBS206 suggested, just swap out those stupid blue relays near the ECU plug.  
    • My only regret with the NC MX5 was no space for a spare, even a space saver doesn't fit in I do have a couple of those puncture repair spray cans, but if I get a large puncture, or sidewall damage, I'm screwed until a tilt tray turns up I'm thinking I might get one of those 4WD style of puncture repair kits that have that rope stuff and glue, whilst it will kill any hope of saving a tyre, it might help getting me out from some backwoods road far enough to find a actual tyre shop if the first can of tyre fix doesn't work I'm keen to see how your new toy pans out Uncle Duncan, I'll be moving to the Highlands next year, you'll need to shout out if your heading to Wakefield, whilst I've lost my balls for happy laps, I still love watching those that can
    • Yeah not sure what the warranty was, but it will be years outside it.  I've shot Link a message, will see what happens, I'm told their support is good. It is a plug in, so its a Link board in a factory case, very easy to access both sides of the circuit board by removing the top or bottom cover. To be fair the the Link, although I've checked to the factory connections and wiring specs, as we learned with Neil's car in the early days not all ECUs source power the same way. He'd been running a factory ECU with no trouble for years, but when we plugged a PowerFC in it wouldn't start up, just kept cycling power on and off. We worked out that the car was missing one of the 10a fuses "Electronic Parts", and to Neil's knowledge it had never been there. Turns out the ECU pulled its main power from that source not the same place the factory ECU did.  Point being....there are multiple battery and ECCS power sources in the factory ECU, and multiple grounds as well....not telling from the outside exactly what the Link uses (and doesn't use)
    • Now, thanks to sonicii, onto the uneven floor from a tyre sticking 100mm into the boot space. I looked into options to raise the floor to the level of the tyre, and ended up going Extruded Polystyrene (XPS). EPS is what I normally think of as polystyrene, the annoying tiny balls that get glued into a flat sheet but XPS is quite different, much firmer and doesn't crumble if you touch it with anything. I also looked at things like heavy duty seating foam but XPS seemed like the right way. I picked up 3x 1200x600x50 sheets for $40ea. Initially I was looking for 100mm sheets because I needed to make up a 100mm gap, but as it turned out 50mm was available, much easier to work with and made it simple to store the tools I used a simple 15cm foam cutter to make the shapes. With some practice I was able to make reasonably clean cuts but I don't think Clark Rubber are going to be calling me to offer a job. https://www.ebay.com.au/itm/405092315205?var=675175481574 First layer in place, 3 dimensions are tricky! Second layer in place, bringing it to level with the top of the spare Cutouts in the top layer for the tools With floor back in place, nice and flat with 100mm stolen but no real impact on usability
    • Sounds like a good idea to me moh
×
×
  • Create New...