Jump to content
SAU Community

Secret Squirrel Trick Power Fc

4bidn1

By 4bidn1,
in Four Door Family & Wagoneers

 Share

Recommended Posts

4bidn1 Mentor

4bidn1

Posted
Posted

Soooo who has got the info for the secret squirrel trick for bypassing the traction control on the power fc . ive searched but all links die i remember you have to do something with pin 51. Having to change directions with computer Atm due to running large injectors for e 85 . So also have a s2 neo nistune comp up for sale in the forsale thread

Link to comment
Share on other sites
4bidn1 Mentor

4bidn1

Posted
  • Author
Posted

Nistune should be fine with big injectors?

has a laytency problem with the injectors. ohms drop under acceleration for a while cutting injectors out seen it a few times now with big injectors 1000cc and larger on a r34 nistune. spoke to matt and it is somthing they will work out over time. looking into it it serms to be a board problem rather than a software problem. I would say the larger the injector the larger the fed back signal

Cofusing computer maybe needs some sort of resistor in the injectors like gtrs run but who knows decided to run pfc now to by

pass problem.

Link to comment
Share on other sites
KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

OK if you already have a PFC it may have some advantages over the Nistune but as a matter of interest what sort of injectors are you using? I have seen reports that the ID1000s work ok with the Nistune.

http://www.skylinesaustralia.com/forums/topic/407081-bnr32-nistune-bigger-injectors-help/

Link to comment
Share on other sites
4bidn1 Mentor

4bidn1

Posted
  • Author
Posted

Yeah diff prob altogether idle , cold start,all perfect. it only seems to be 34 comps that throw this prob. its only under acceleration for a breif period of time ... using bosch injectors

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • deev236
      Stagea S2 RS Four S Misfire/Rough Idle

      By deev236 · Posted

      And by the way, I've also checked the ECU diagnostic numerous times and got a bad O2 sensor code and initially an Ignition Primary code, which is why I replaced the O2 sensor and all the ignition components (coil packa, plug and loom). No codes have been coming up lately despite the ongoing issue.
    • deev236
      Stagea S2 RS Four S Misfire/Rough Idle

      By deev236 · Posted

      Hey pber13, unfortunately still no luck. At this point the following has been done with little or no success: - Spark plugs replaced, gapped to 0.8mm - Splitfire coilpacks installed to replace originals - Replaced Ignition Coil/Coilpack harness with a new genuine nissan one - New fuel filter - Replaced AFM/MAF sensor - Injectors have been thoroughly cleaned with an online flush (without removing) - Upper engine and inlet decarbed - blew tons of black smoke out, cleared the carbon deposits from the top of the engine and exhaust.  - IACV removed and thoroughly cleaned with carburettor cleaner - O2 sensor replaced with new and genuine one -  Smoke test revealed no vacuum leaks - Healthy compression test of 160psi across all 6 cylinders Overall the car does run a lot smoother now, no backfires between gear shifts like it did originally... but the rough idle when warmed up is still there. It may not even be a misfire but simply a rough idle. Seems crazy to me that so many people have had this issue and seemingly no one has gotten to the bottom of it, or at least never bothered to post if they did! Hope you have more luck than I did pber13, I'm at a point now where I'm just going to try to ignore it unless it gets worse. Would love to fix it but I've genuinely run out of ideas of what it could be.
    • R3N3
      AC Compressor

      By R3N3 · Posted

      I got the full frenchys kit too. Really awesome kit. Easy to install my only complaint was the hardlines I think could be routed differently (I modified mine) but I realise the kit needs to suit multiple applications. This was the hard lines before I modified them. They were touching the wastegate pipe. I ended up reducing the distance between firewall and first bend. The made it so they tucked along the frame rail.
    • pber13
      Stagea S2 RS Four S Misfire/Rough Idle

      By pber13 · Posted

      Deeve, I don't suppose that you've made any progress on this? My Stagea has the exact same problem, and just like you, I've read through as much as I can online, with no real progress. My car isn't throwing any codes at all, which is a little frustrating. I've changed plugs, checked the wiring and harness. A new MAF gets here next week, but I'm not hopeful it will solve the issue.
    • Butters
      AC Compressor

      By Butters · Posted

      I installed it all myself,  It was really easy to install.  I got a professional to do the degas/gas.
×
×
  • Create New...