Jump to content
SAU Community

R32 Gtst - Rb25Det 7K Brisbane


Recommended Posts

Up for sale is my 1989 Gtst. I've just bought an evo 7 and don't really need 3 cars. I've had this one for 3 and a bit years, it had the engine conversion done already when I bought it. In the time I've owned it I have done the rb25det gearbox conversion and also had the GT30 put in with a turbosmart 45mm progate.

Car has:

RB25DET & gearbox

Gt3076

Turbosmart Progate 45mm

Z32 AFM

Front mount

Extreme cushion button ceremic clutch

Yellow jacket coil packs

Power FC

Tein hr coilovers

White line sway bars front and rear

3" exhaust from turbo

GTR front seats

GTR bonnet

Shimmed lsd

All bushes had just been replaced when I bought the ca

Nismo adjustable fuel reg

Will come with 16" skid rims (not the r33 gtr rims pictured)

Body on the car is a bit rough (paint work mainly). Clear coat on roof is shot, some jerk keyed my car while I was at work about 6 months ago, general order of paint is rough. I've included photo's of these things. Car will be sold without road worthy, I has a few things that it needs for road worthy, depending on if you know someone that can help you out with a slightly friendlier road worthy. it has a very minor leak in the steering rack, and will need the screamer pipe plumbed back in. Has engineers certs for the rb25 and larger turbo.

So yea, $7000 for all that, No point haggling based on the things that are wrong, as I've price the car fairly based on these things.

The gtr rims are going up for sale separately so the could be negotiated into the sale for a little extra.

Contact me via pm or Mobile 0416100051

IMG_0653_zps437fa64b.jpg?t=1348881485

IMG_0652_zps0579cd5d.jpg?t=1348881486

IMG_0648_zps82937148.jpg?t=1348881376

Clear coat on roof

IMG_0646_zps409d9dab.jpg?t=1348881298

Key mark

IMG_0645_zpsb7941f71.jpg?t=1348881256

IMG_0643_zps08bcd98a.jpg?t=1348881197

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • And by the way, I've also checked the ECU diagnostic numerous times and got a bad O2 sensor code and initially an Ignition Primary code, which is why I replaced the O2 sensor and all the ignition components (coil packa, plug and loom). No codes have been coming up lately despite the ongoing issue.
    • Hey pber13, unfortunately still no luck. At this point the following has been done with little or no success: - Spark plugs replaced, gapped to 0.8mm - Splitfire coilpacks installed to replace originals - Replaced Ignition Coil/Coilpack harness with a new genuine nissan one - New fuel filter - Replaced AFM/MAF sensor - Injectors have been thoroughly cleaned with an online flush (without removing) - Upper engine and inlet decarbed - blew tons of black smoke out, cleared the carbon deposits from the top of the engine and exhaust.  - IACV removed and thoroughly cleaned with carburettor cleaner - O2 sensor replaced with new and genuine one -  Smoke test revealed no vacuum leaks - Healthy compression test of 160psi across all 6 cylinders Overall the car does run a lot smoother now, no backfires between gear shifts like it did originally... but the rough idle when warmed up is still there. It may not even be a misfire but simply a rough idle. Seems crazy to me that so many people have had this issue and seemingly no one has gotten to the bottom of it, or at least never bothered to post if they did! Hope you have more luck than I did pber13, I'm at a point now where I'm just going to try to ignore it unless it gets worse. Would love to fix it but I've genuinely run out of ideas of what it could be.
    • I got the full frenchys kit too. Really awesome kit. Easy to install my only complaint was the hardlines I think could be routed differently (I modified mine) but I realise the kit needs to suit multiple applications. This was the hard lines before I modified them. They were touching the wastegate pipe. I ended up reducing the distance between firewall and first bend. The made it so they tucked along the frame rail.
    • Deeve, I don't suppose that you've made any progress on this? My Stagea has the exact same problem, and just like you, I've read through as much as I can online, with no real progress. My car isn't throwing any codes at all, which is a little frustrating. I've changed plugs, checked the wiring and harness. A new MAF gets here next week, but I'm not hopeful it will solve the issue.
    • I installed it all myself,  It was really easy to install.  I got a professional to do the degas/gas.
×
×
  • Create New...