Rb20Det

[david69]

hey all.got a question.have a r32 rb20det,r33 series 1 turbo,mines computer,gtr fuel pump,fmic,pod filter etc. need to get new seals for my injectors as they are leaking a bit and you can smell the fuel..i have a set of gtr injectors.do i service the standard ones or the gtr injectors.Can i just put the gtr injectors in or will it just flood and cause me grief or do i need more tuning.the car runs well as is,sometimes slight miss at idle.any help appreciated.cheers

[Dose Pipe Sutututu]

Service the stock ones, put new pintle caps on them, put new seals on, and pop them back into the car.

The GT-R injectors are 440cc and the RB20DET are like 270cc I believe... it will flood to the sht house unless you alter your injection map.

[cree]

If they are GTR injectors I think you will need the resistor box (Can't remember the name) from the GTR too. You will need a re-tune if you put the bigger injectors in.

[Dose Pipe Sutututu]

If they are GTR injectors I think you will need the resistor box (Can't remember the name) from the GTR too. You will need a re-tune if you put the bigger injectors in.

they are low impedence injectors, so yes you will need the resistor box (or just make one). You will then need to splice it into the injector loom, I posted somewhere on this forum years ago on making your own resistor block