Jump to content
SAU Community

Y34 Gloria/cedric Owners Manual In English


rb26stagea

Recommended Posts

Easy to source, nice and cheap: what's not to like?

I have also been in regular contact with another Y34 owner who has successfully sourced (Maxima?) brake pads, and shimmed them to fit our cars: will post part numbers when I get them...

Also, just FYI: not sure if it's a common issue (I haven't experienced it), but he had ongoing, intermittent rough-running issues, which after much diagnosis turned out to be failing ignition coils.

Just a couple of things to bear in mind: once we get enough info, it may be a good idea to create a Y34 parts/service sticky thread, as there's precious little information available on the interwebs...

Link to comment
Share on other sites

Yeah i agree - i've found there's really not much info available on there however Aus-Vip.com i have found has a little.. not much.. but a little haha. I have the same intermittent rough-running issues but i had put it down to coilpacks as it seems to be the same sort of issue as what I had years ago in an S13 then replaced the coilpacks and all fixed.

I havn't bothered to buy new coilpacks yet for my Y34 but was planning on getting a set of Yellow Jackets from performance-wise.

Link to comment
Share on other sites

Also I had my radiator end tanks replaced which turned out to be the same/very similar to Navara radiator end tanks so they were used :)

And when i needed new brake pads I took the worn out pads to SA Brake & Clutch and they matched them up with some replacements - no modification was needed either.

Link to comment
Share on other sites

yeah: the brake pad thing seemed a little odd to me: I figure I'll be able to source a set of Endless or similar quite easily. Will do some research to ascertain whether ours are the same as the USDM M45- I'd say it's a pretty safe bet. Also, have seen a number of Y34s going at auction with what I believe to be CPV35 Brembos fitted, so it may be that we run the same brakes as a non-brembo V35, given Mr. Nissan's tendency to use interchangeable parts.... Once again: more research required.

Link to comment
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What a major headfk! I was looking into a Speedtek gearset, after reading your experiences & you pointing out PRP removed them from their website, it's pretty evident to avoid them with the longest pole possible.
    • Hey Guys Im thinking of selling my dedicated track car (Cannot be registered), and car trailer. Thought Id put it up here 1st to give you guys first option, before advertising it elsewhere   Car is a 10/1993 Nissan Skyline HCR32 R32 GTST (Cannot be registered), Dedicated Track Car. Interior stripped bar factory dash RB20DET motor/5 Speed Manual 6 Point Bolt in “Bond” Roll Cage Drivers Seat is a Racing bucket seat, standard passenger seat 5 Stud Hub conversion F/R, Intima Track/Race Pads, DBA T3 Club Spec vented rotors. 17 Inch Rims with 245/45/17 Nitto NT01 Semi Slicks, Rims are 8 inch front, 9 inch rear Brake lines replaced with GKTeck Hard Lines Custom Oil/Air Separator, with sump drain 5L custom Catch Can, with built in Radiator Overflow Tank Boost Doc Cam Splash Plates Brand New Pulsar G30-770 Turbo with custom tubular high mount exhaust manifold, Cat removed, 3 inch exhaust with screamer pipe 45mm Turbosmart wastegate GFB Electronic Boost Controller Front facing plenum Big Intercooler with R35 MAF New Radiator and Thermo fan  LS2 Coil Upgrade on custom rail 1000cc injectors/ 460L fuel pump direct wired to battery/running straight E85 Battery relocation behind passenger seat, Gel Battery, with isolation switch  Nistune ECU (Needs to be retuned for new turbo kit, Around $800 for the tune) Headlights replaced with custom Aluminium duct and a shed of various spare parts hahaha and a heap other things I cant think of right now In Car video at Wakefield Park https://youtu.be/757a75mzIvI Trailer is a Mario Car Trailer – Beaver Tail, 2T capacity, Tare 650KG, Carrying Capacity 1350KG. Dont really have any pics of trailer bar the 2 attached lol I was looking for around the $25K mark for the R32 and trailer, but happy to consider separating Ranger may also be for sale for the right price, Never been offroad, 4wd only used for reversing the trailer on grass  lol Not interested in trades. Let me know if you want and more info or pics   new setup at idle.mp4
    • Yeah the Drift R wheels look awesome. They are pitted though, wonder if I can fix that somehow.
    • I picked up my diff today. Both their shop manager and machinist wanted to have a chat prior to me leaving. Conversation started with "Where did you buy these garbage parts? What's the name of the company?" They actually went on Speedtek's website during our conversation and made what I think is the best gear head joke I've ever heard after seeing they make straight cut gears. "They've probably only gotten away with selling straight cut gears as they'll make noise whether they're properly machined or not. People are none the wiser" The humor made the 2500$ in the hole I'm in after this whole experience a little better lol. They also pointed out that not only did they find identical issues on both ring and pinions that Speedtek had sent, but that by eye you can see the pinion teeth do not have the same profile from one end to the other.  They went on about this being the worst diff job they've ever done and how it was a colossal waist of time. Luckily after mentioning how I purchased another diff to learn how to assemble them, they were nice enough to give me a crash course on diff assembly on another diff they were currently doing. I like to tell myself they did this to be nice but deep down, I know it's to be extra certain they'll never see me there again lol.  Speedtek was pushing for a store credit but I'll never feel confident purchasing from them again due to their third world machining techniques and QC. I just asked for a full monetary refund.  I'll pop the diff back in this Friday and take it for a spin if the streets are clear of snow. 
    • Hey any chance you still have this for sale or know someone that could help me out with tuning my stagea?
×
×
  • Create New...