Jump to content
SAU Community

Recommended Posts

hey guys, i've got a r34 GT-T. pretty much totally stock. I've had it for almost 2 years and haven't had a single problem. but just yesterday all of a sudden it wouldn't start. I drove it fine and about an hour later tried driving it again and it wont start at all.

The car sounds like its about to start so its not battery related, but it simply doesn't fire up. the NRMA guy said there isn't enough pressure in the fuel line and when he sprayed fuel from a can into the engine the car sounded like it wanted to start but simply couldnt.

I really need the car fixed ASAP. Is this a common problem? I am wondering would this have caused my spark plugs to get fouled also? as i tried starting it for a fairly long while.

And is it likely to be the fuel pump? is there a method to test what is actually wrong?

Thanks heaps.

Sounds like a fuel pump, easy way to check is get a test light and make sure your getting power to it first. Or if your really lazy get a friend to turn the key to the 'on position' while you have your head in the boot, listening for a slight hum from the pump. As it should prime the fuel rail before start up.

If no hum more than likely it will be the fuel pump. Bosch do a universal pump that fits in the housing perfectly, otherwise Walbro do a few reasonably priced units for standard replacement. Just call lube mobile out and get them to do it in your driveway. They did mine, only took the guy bout an hour to diagnose, get parts and fit it!

Edited by Aazzy

Your fuel pump is likely on its way out. Its an easy method to replace it. Unplug the fuel line from the pump and puy it into a bucket then start the car. If no or little fuel.comes out the pump is gone. Make sure the pump is getting power. Might be a fuse. They screw up because they wear out, seize, sick up dirt etc. Its an old compoment. Easy to fix.

oh okay. lube mobile sounds expensive probably give it a go myself.

doubt its the battery because it was tested with the 12v source the nrma have

If you have no idea about anything, paying someone an hour labour to fix the problem is not expensive. Or you can f**k around for ages and make a ness of it yourself

rather do things myself on the car, so at least i can learn it. i mean its just a fuel pump, shouldn't be too hard to replace.

anyways, yeah just looking for general suggestions on what it could be if it's not the fuel pump.

and a quick question, when i turn the key twice so the car and audio n all that is on, but im not holding the key in igititon to start it. at that time, should the fuel pump immediately start pumping fuel? even though the engine isn't on? how does that part work exactly?

okay so i've done a lot of searching around and think the best/cheapest replacement for the car is the bosch 040 intank fuel pump? its costing $210 at just jap.

My car is pretty much stock and i doubt ill be upgrading it heavily any time soon, so i dont really need a high flow pump, is the stock oem part cheaper? what is the best replacement pump/cheapest i should use?

and its an in tank pump, not external inline one?

The Walbro needs to be wired to the battery through a relay and fuse, there is a 'how to' around if you search.

it doesnt "need" to be does it?...it just wont run at full potential if its not...but it will run fine as a replacement pump...

unless you are planning power mods for now just buy one from one of the many cars being wrecked...cost nothing...problem solved

I have seen failures and also car's stalling/running shit when wired to the factory wiring, they are supposed to run on 12V minimum, any less can cause the windings to burn out or pressure fluctuations.

Nismo/Tomei pumps seem to run fine on the lower voltage, as do stock pumps. Most aftermarket pumps require the wiring mod.

thanks for all the help guys. changed the fuel filter and the fuel pump. the old pump was not working at all.

i hooked this one up with stock voltage as the relay system is a bit out of my understand (electronics). but it seems to run fine, at least as a stock replacement. might be the placebo but i actually feel like there is a slight performance increase.

Thanks again guys. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oof. One of my mates has an R34 GT-R that he initially was a "I want to go twins for response and convenience" on his stock 2.6 with Kelford 272 cams, but his friends are pests and were always in his ear about their place being in the bin.   Eventually one of the 2860-5s decided to add it's own input and force his hand, so he conceded and went for a Pulsar 6262G ("G35 900") with T4 0.85 hotside.    Here's an overlay of the results, same cams, same stock bottom end, same boost, same fuel, just from a pretty tidy 2860-5 install to a Pulsar turbo on a 6boost maniifold on BP98.   Worth mentioning here, it may seem like a dead horse thing but the dyno plot doesn't tell the story of how much better it is to drive - transient response has completely changed the car, he used to have flat foot shifting to stop it having to wind up again on gear changes even at >7000rpm... now it builds boost faster than that even short shifting.   It's 100% transformed the car before you even consider how much better it holds on: Pulsar and Garrett aren't the same, but from our experience if you're just looking for a better drive and the ability to make the same or more power I think the divided G30 770 would probably be the smallest I'd go to.
    • Great work Duncan, any events local you will give it a test once all done? 
    • Sweet, yeah hoping stock gears will hold up. May use the transbrake feature on hill climb starts so that will test it.
    • Yeah, the thread is only nearly 20 years old.
    • Been down in Tassie for 2 weeks (a cruise, not a race for once) but spent a little time on her when I got back. I worked out the injector settings in the PowerFC were not correct for nismo 555s, set those to 66% +10ms and added a little air at closed throttle, set the timing (approximately, because it has some weird non 15o cells around idle) and now she starts and idles properly. She purrs like a kitten (ignore the co2 alarm in the background, I did  ) 20250518_171052.mp4 Next step, off for run-in, tuning and alignment!
×
×
  • Create New...